2 for 1, My son's first Square Build - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MadManAndrew · 11-13-2011, 10:24 PM

Wow, aren't you like fourteen? When I was your age I was probably twice your size, lol. Nice work though, your truck is coming along great. Keep up the good work.

primrrd · 11-14-2011, 10:15 AM

Great progress Kelvin.
An ambitious project for you and your dad! Enjoy the process and the time with your pops- it will mean a lot to you the rest of your life!

I used to live near Longview in Clarksville City, right off of george richey road just west of White Oak, tx. I miss the pines and hills of ETX!

Keeping an eye on your progress!

justpball · 12-04-2011, 12:18 PM

Good job buddy!
Posted via Mobile Device

aggie91 · 12-04-2011, 05:55 PM

Well we went to Turkey Drag in Tyler yesterday. We walked around and took some pictures and met a board member, Moostifer and got to look at his truck. We also ran into another member who is also a neighbor, barnold and we got to see another members truck in person, Hazel (N2BILLET). That truck is SO much nicer in person.

Well we got some ideas and it got Korbin's blood pumping to work in his. We came home and cleared out the garage to work on his frame. I had cut out the main parts for his C notch with a plazma a week or so ago. I cleaned the edges up with a grinder while Korbin worked on the inside of the frame where we did the front crossmember work. He had to make a few welds on the inside of the frame.

When he finished that and I gave my blessing on the welds, we started on the rear C notch. We got both side plates on the frame on both sides and had to call in a night. Had to stop to clean out the garage so that Mom could park inside since it was going to start raining. We it is still raining and we have not gotten any pictures yet. Maybe we can later when Korbin gets back from his student council meeting that he is at now.

stepside83 · 12-04-2011, 07:17 PM

deff a cool build cant wait to see more

grayharville · 12-05-2011, 02:10 AM

Looks good man. I went out to turkey drag also, hopefully next year we'll have a spot set up for east Texas squares, our little truck club.

If you ever need any parts for your truck just contact me.

Keep up the good work, it looks great for a youngster, well im only 18 myself!
Posted via Mobile Device

Moostifer · 12-05-2011, 11:04 AM

Korbin, it was great meeting you and your dad Saturday! Keep up the great work and next year, you'll be rolling in your own ride to Turkey Drag!

Can't kech me · 12-05-2011, 06:04 PM

Quote:

Originally Posted by grayharville

Looks good man. I went out to turkey drag also, hopefully next year we'll have a spot set up for east Texas squares, our little truck club.

If you ever need any parts for your truck just contact me.

Keep up the good work, it looks great for a youngster, well im only 18 myself!
Posted via Mobile Device

sweet, ill keep you in mind. is it like nos stuff or just parts you've accumulated? where is East Texas squares based out of?

Yeah moostifer, keyword "rolling" bahaha

grayharville · 12-05-2011, 06:15 PM

Its a lot of accumulated parts, I can't afford nos stuff lol.

We are all over etx from Terrell to Tyler, we hope to get more people to join up.
Working on gettin some cool decals made soon
Posted via Mobile Device

aggie91 · 12-11-2011, 01:36 AM

Well we got to spend some time on this one last night and today. We have a new machine at work and I played around with an idea I had seen on another web site. I came up with a notch for the drive shaft on the crossmember right behind the cab.

Here it is in the flat...

after a little hand forming and welding by Korbin, we have this...

Here it is sitting on the crossmember before we cut it...

We got the top side of the C-notch done also, I will let Korbin post that work. I also got to spend a few moments on my truck and it rolled outside on its own wheels since moving into the garage..

SCOTI · 12-11-2011, 09:23 AM

Nice work guys!

scottco · 12-11-2011, 09:52 AM

I have a very good cab I would give you if you ever get to the Panhandle of TX... no rain . no rust,,, lol

Can't kech me · 12-11-2011, 06:56 PM

We got quite a bit more done last night, welded/bent the top half of the notch boxing into place.

done to both sides

i did all welds

after church we cut the notch out, used a sawzall half of the time and a cutting torch half of the time( the torch cuts were done by my old man, and they aint very pretty.

we will be gone all of next weekend but after that i will be off for 2 weeks for Christmas

hopefully we can get the bottom half of the notch boxing welded in. the top halve will be smoothed for looks. and scottco, that's super nice of you and i would take it in a heartbeat, but thats a little far away and its a little far away

aggie91 · 12-12-2011, 12:55 AM

Yea, my torch cutting skills stink. Where I cut will ground anyway so it did not need to be perfect. Some of it will covered with some plating we are going to do for strength.
Posted via Mobile Device

made2drag · 12-12-2011, 05:51 PM

good work guys, waiting to see what your bed will look like. notches and diff holes only or big notch cover....love the crossmember notch...it looks like plenty of clearance...the frame notches will hit way before the crossmember will....love the father/son build

Can't kech me · 12-12-2011, 05:59 PM

i dont plan on notching the bed floor, but raising the whole thing, looks better, more usable...

made2drag · 12-12-2011, 06:11 PM

Quote:

Originally Posted by Can't kech me

i dont plan on notching the bed floor, but raising the whole thing, looks better, more usable...

cool, cant wait to see it raised. i saw it done a couple times on here, sounds like the best way to go. how high you going?

Can't kech me · 12-12-2011, 07:33 PM

we measured and if we raised it 4 inches we would have like a 1/2 an inch of clearance or somethin like that. it should look pretty sick

made2drag · 12-14-2011, 10:51 AM

Quote:

Originally Posted by Can't kech me

we measured and if we raised it 4 inches we would have like a 1/2 an inch of clearance or somethin like that. it should look pretty sick

sweet....please take lots of pics and how you reattach it once you unbolt it and move it up...i'm almost at the point where i put my step in and not sure if i am gonna move the bed floor up or cut a hole. you guys are moving fast and love your progress.

duallyjams · 12-26-2011, 01:20 PM

Keep up the good work.

C@rnut001 · 12-26-2011, 10:00 PM

Man, I must say that I am proud of you and your dad for your work on this truck...Keep up the great job and get it done in time for you to drive. I wish I had built a truck with my oldest son, maybe he wouldn't have gotten into so much trouble....

Keep up the effort and keep us posted. I am loving your truck and I am also thankful for guys who will help kids get these kind of deals for building a truck!

ProStreet83C10 · 12-27-2011, 01:24 AM

thatd make one cool facebook profile pic haha

made2drag · 12-30-2011, 03:02 PM

any new progress....i know its christmas break and all....

aggie91 · 12-30-2011, 05:35 PM

this is korbin. not a whole lot. ive been kinda lazy and havent really worked much. i did shoot a 5 five point earlier in the break and dad shot an axis doe.

notyo_cheez · 12-30-2011, 06:46 PM

Quote:

Originally Posted by scottco

I have a very good cab I would give you if you ever get to the Panhandle of TX... no rain . no rust,,, lol

<raises hand> Do you still have it?

11-13-2011, 10:24 PM	#126
MadManAndrew Registered User Join Date: Mar 2011 Location: Dallas, Texas Posts: 920	Re: 2 for 1, My son's first Square Build Wow, aren't you like fourteen? When I was your age I was probably twice your size, lol. Nice work though, your truck is coming along great. Keep up the good work. __________________ 1955 Chevy 3600 http://67-72chevytrucks.com/vboard/s...61#post8589061

11-14-2011, 10:15 AM	#127
primrrd Registered User Join Date: Jun 2010 Location: houston, tx Posts: 323	Re: 2 for 1, My son's first Square Build Great progress Kelvin. An ambitious project for you and your dad! Enjoy the process and the time with your pops- it will mean a lot to you the rest of your life! I used to live near Longview in Clarksville City, right off of george richey road just west of White Oak, tx. I miss the pines and hills of ETX! Keeping an eye on your progress!

12-04-2011, 12:18 PM	#128
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: 2 for 1, My son's first Square Build Good job buddy! Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

12-04-2011, 05:55 PM	#129
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 2 for 1, My son's first Square Build Well we went to Turkey Drag in Tyler yesterday. We walked around and took some pictures and met a board member, Moostifer and got to look at his truck. We also ran into another member who is also a neighbor, barnold and we got to see another members truck in person, Hazel (N2BILLET). That truck is SO much nicer in person. Well we got some ideas and it got Korbin's blood pumping to work in his. We came home and cleared out the garage to work on his frame. I had cut out the main parts for his C notch with a plazma a week or so ago. I cleaned the edges up with a grinder while Korbin worked on the inside of the frame where we did the front crossmember work. He had to make a few welds on the inside of the frame. When he finished that and I gave my blessing on the welds, we started on the rear C notch. We got both side plates on the frame on both sides and had to call in a night. Had to stop to clean out the garage so that Mom could park inside since it was going to start raining. We it is still raining and we have not gotten any pictures yet. Maybe we can later when Korbin gets back from his student council meeting that he is at now. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-04-2011, 07:17 PM	#130
stepside83 Registered User Join Date: Jan 2010 Location: butler pa Posts: 328	Re: 2 for 1, My son's first Square Build deff a cool build cant wait to see more

12-05-2011, 02:10 AM	#131
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: 2 for 1, My son's first Square Build Looks good man. I went out to turkey drag also, hopefully next year we'll have a spot set up for east Texas squares, our little truck club. If you ever need any parts for your truck just contact me. Keep up the good work, it looks great for a youngster, well im only 18 myself! Posted via Mobile Device __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares

12-05-2011, 11:04 AM	#132
Moostifer a fool with no money Join Date: May 2005 Location: Overton, Tx Posts: 532	Re: 2 for 1, My son's first Square Build Korbin, it was great meeting you and your dad Saturday! Keep up the great work and next year, you'll be rolling in your own ride to Turkey Drag! __________________ Basicly stock 83 SWB with a few Bolt-ons before, during and still during http://photobucket.com/albums/y251/moostifer/truck/ http://photobucket.com/albums/y251/moostifer/motor/

12-05-2011, 06:15 PM	#134
grayharville ^^who I am^^ what I say> Join Date: Jun 2009 Location: Murchison, Tx Posts: 992	Re: 2 for 1, My son's first Square Build Its a lot of accumulated parts, I can't afford nos stuff lol. We are all over etx from Terrell to Tyler, we hope to get more people to join up. Working on gettin some cool decals made soon Posted via Mobile Device __________________ 70 chevy LWB 350/TH350 Barn find (AKA the 70) http://www.67-72chevytrucks.com/vboa...d.php?t=406364 East Tx Squares

12-11-2011, 01:36 AM	#135
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 2 for 1, My son's first Square Build Well we got to spend some time on this one last night and today. We have a new machine at work and I played around with an idea I had seen on another web site. I came up with a notch for the drive shaft on the crossmember right behind the cab. Here it is in the flat... after a little hand forming and welding by Korbin, we have this... Here it is sitting on the crossmember before we cut it... We got the top side of the C-notch done also, I will let Korbin post that work. I also got to spend a few moments on my truck and it rolled outside on its own wheels since moving into the garage.. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-11-2011, 09:23 AM	#136
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: 2 for 1, My son's first Square Build Nice work guys! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-11-2011, 09:52 AM	#137
scottco Registered User Join Date: Aug 2002 Location: Texas Posts: 198	Re: 2 for 1, My son's first Square Build I have a very good cab I would give you if you ever get to the Panhandle of TX... no rain . no rust,,, lol __________________ 1964 C10 SWB original 1970 SS El Camino 1964 Impala SS http://67-72chevytrucks.com/vboard/s...d.php?t=649951

12-11-2011, 06:56 PM	#138
Can't kech me Registered User Join Date: Jun 2010 Location: Longview, TX Posts: 222	Re: 2 for 1, My son's first Square Build We got quite a bit more done last night, welded/bent the top half of the notch boxing into place. done to both sides i did all welds after church we cut the notch out, used a sawzall half of the time and a cutting torch half of the time( the torch cuts were done by my old man, and they aint very pretty. we will be gone all of next weekend but after that i will be off for 2 weeks for Christmas hopefully we can get the bottom half of the notch boxing welded in. the top halve will be smoothed for looks. and scottco, that's super nice of you and i would take it in a heartbeat, but thats a little far away and its a little far away __________________ "As I walk through the valley of rice i fear no honda, for i have torque!" My truck>http://http://67-72chevytrucks.com/v...d.php?t=418618

12-12-2011, 12:55 AM	#139
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 2 for 1, My son's first Square Build Yea, my torch cutting skills stink. Where I cut will ground anyway so it did not need to be perfect. Some of it will covered with some plating we are going to do for strength. Posted via Mobile Device __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-12-2011, 05:51 PM	#140
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: 2 for 1, My son's first Square Build good work guys, waiting to see what your bed will look like. notches and diff holes only or big notch cover....love the crossmember notch...it looks like plenty of clearance...the frame notches will hit way before the crossmember will....love the father/son build

12-12-2011, 05:59 PM	#141
Can't kech me Registered User Join Date: Jun 2010 Location: Longview, TX Posts: 222	Re: 2 for 1, My son's first Square Build i dont plan on notching the bed floor, but raising the whole thing, looks better, more usable... __________________ "As I walk through the valley of rice i fear no honda, for i have torque!" My truck>http://http://67-72chevytrucks.com/v...d.php?t=418618



Register or Log In To remove these advertisements.

12-12-2011, 07:33 PM	#143
Can't kech me Registered User Join Date: Jun 2010 Location: Longview, TX Posts: 222	Re: 2 for 1, My son's first Square Build we measured and if we raised it 4 inches we would have like a 1/2 an inch of clearance or somethin like that. it should look pretty sick __________________ "As I walk through the valley of rice i fear no honda, for i have torque!" My truck>http://http://67-72chevytrucks.com/v...d.php?t=418618

12-26-2011, 01:20 PM	#145
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 2 for 1, My son's first Square Build Keep up the good work. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-26-2011, 10:00 PM	#146
C@rnut001 Registered User Join Date: Dec 2011 Location: Alaska Posts: 405	Re: 2 for 1, My son's first Square Build Man, I must say that I am proud of you and your dad for your work on this truck...Keep up the great job and get it done in time for you to drive. I wish I had built a truck with my oldest son, maybe he wouldn't have gotten into so much trouble.... Keep up the effort and keep us posted. I am loving your truck and I am also thankful for guys who will help kids get these kind of deals for building a truck!

12-27-2011, 01:24 AM	#147
ProStreet83C10 Drag Racer Join Date: Nov 2006 Location: Mason City, Iowa Posts: 1,276	Re: 2 for 1, My son's first Square Build thatd make one cool facebook profile pic haha __________________ Zach Hall 1983 Chevy C10 R/T: .194 60': 2.322 330: 6.379 1/8: 9.803 MPH: 71.37 1000: 12.781 1/4: 15.314 MPH: 88.79

12-30-2011, 03:02 PM	#148
made2drag Registered User Join Date: Nov 2009 Location: alabama Posts: 2,079	Re: 2 for 1, My son's first Square Build any new progress....i know its christmas break and all....

12-30-2011, 05:35 PM	#149
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 2 for 1, My son's first Square Build this is korbin. not a whole lot. ive been kinda lazy and havent really worked much. i did shoot a 5 five point earlier in the break and dad shot an axis doe. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

Register or Log In To remove these advertisements.