1949 Chevy 3100 - the journey begins

[1950chevy4x4]

Originally Posted by focusedontheprize

This weekend I was able to sneak away to the garage on Sunday. The garage is getting smaller and smaller by the day so I needed to organize everything and get some things off the floor. Once that was done I pulled the cab. Thanks to everyone who has posted tips and tricks on making the cab hoist - it really makes life so much easier when you are by yourself.

The garage is getting a little tight....

Tonight the girl was out with her friends so I pulled the motor and transmission. I am hoping to get to a bare frame by Sunday so I can start remove the shackles and the crossmember.

Cab hoist? I'm doing the same as you using my engine hoist to move my cab around. What is this hoist you are talking about?

[Desert1957]

Any updates on this build?

[MIKESAD50]

John,
It was nice to talk with you.
Looking good on the truck progress. The shop/Garage space gets small quick when the truck is not much more than a frame.

[Flysocal]

I really like the orange paint. If It were mine I would run it as a patina. I was blown away at the price of a quality paint job. With a patina truck it not only looks cool but you get a sleeper and it retains its utility as a truck.

As for the chassis keeping the original frame is really cool but trust me when I say its a bunch of work. In addition to AME I would look at NO LIMIT and SCOTTS HOTRODS. I've been happy with my stuff from Scotts and I've called No Limit a couple times with tank questions and they always pick up their phone. Both companies stand behind their product.

[focusedontheprize]

Sorry guys, we have been busy the last few weeks with friends visiting so I haven't been on this as much as I would like to.

Originally Posted by 1950chevy4x4

Cab hoist? I'm doing the same as you using my engine hoist to move my cab around. What is this hoist you are talking about?

I was referring to the wooden cab hoist that I attach to the cherry picker. It made life so much easier and it was great that I could do it by myself.

Originally Posted by Desert1957

Any updates on this build?

Not too many unfortunately. A lot of chassis work at the moment.

Originally Posted by Flysocal

I really like the orange paint. If It were mine I would run it as a patina. I was blown away at the price of a quality paint job. With a patina truck it not only looks cool but you get a sleeper and it retains its utility as a truck.

As for the chassis keeping the original frame is really cool but trust me when I say its a bunch of work. In addition to AME I would look at NO LIMIT and SCOTTS HOTRODS. I've been happy with my stuff from Scotts and I've called No Limit a couple times with tank questions and they always pick up their phone. Both companies stand behind their product.

Thanks, my father is incredibly talented with a paint gun and after learning how much a quality paint job costs I have a new level of respect for those guys. I love the orange, I will end up probably scuffing it with CLR to brighten it up and go from there.

I can definitely understand your point on the chassis and looking at an after market, however I really wanted to take this project on myself. A ton of work, yes, however I am looking forward to everything I am going to learn. I may be cursing those words down the road.

[1950chevy4x4]

Originally Posted by focusedontheprize

Sorry guys, we have been busy the last few weeks with friends visiting so I haven't been on this as much as I would like to.




I was referring to the wooden cab hoist that I attach to the cherry picker. It made life so much easier and it was great that I could do it by myself.


Not too many unfortunately. A lot of chassis work at the moment.




Thanks, my father is incredibly talented with a paint gun and after learning how much a quality paint job costs I have a new level of respect for those guys. I love the orange, I will end up probably scuffing it with CLR to brighten it up and go from there.

I can definitely understand your point on the chassis and looking at an after market, however I really wanted to take this project on myself. A ton of work, yes, however I am looking forward to everything I am going to learn. I may be cursing those words down the road.

Do you have any pictures of your hoist? I just about dropped my cab on its face the other day and i don't need anymore dents in it.

[focusedontheprize]

Like I mentioned, it has been hard to escape to the garage for the last couple weeks so progress has been slow. I put the suspension back in and leveled out the frame to take my center line measurements/marks for the IFS and rear suspension swap.



Next was removing the remaining parts on the frame so I have been tackling rivets the last week. My plans is to remove all the parts that are riveted on the frame and will in the end weld in nuts to bolt them back in. It was stuff like this that really bothered me and I wanted to start fresh...




Removed the center crossmember..

[focusedontheprize]

I sold the front axle setup this past which I was happy about. This list will continue to grow...

[focusedontheprize]

Sent you a PM

[99 to Life]

leveling the frame is an underestimated task. be way easier with a frame table thats for sure. good luck with the to do list. as for rivets. I use the cutoff wheel and make a buch of slits in them, then pound them out, usually works well.

[focusedontheprize]

Originally Posted by 99 to Life

leveling the frame is an underestimated task. be way easier with a frame table thats for sure. good luck with the to do list. as for rivets. I use the cutoff wheel and make a buch of slits in them, then pound them out, usually works well.

Yeah similar technique. X the head and then knock them off with the chisel and pound them out. That is what I have been working on and am finishing today.

Removed the cab mounts, running board brackets, and front crossmember. I welded in 1x1 braces to hold it all together for the sandblaster. This frame has 6 rivets left on it and it is ready for the blaster this week.





Once I get it back from the blaster, I am going to epoxy it and start working on the crossmembers and start mocking up the suspension.

[Desert1957]

WOW , That's what I call a stripped down frame.

[Flysocal]

Oh man I don't miss this part of the build but it's the best way to go for sure, get it done right. I removed everything except the front crossmember (core support), cab mounts and rear crossmember. It feels nice to have clean parts after blasting and start building it up.

[focusedontheprize]

Originally Posted by Desert1957

WOW , That's what I call a stripped down frame.

Haha, well that was the goal. Rivets and I have a really love/hate relationship now.

Originally Posted by Flysocal

Oh man I don't miss this part of the build but it's the best way to go for sure, get it done right. I removed everything except the front crossmember (core support), cab mounts and rear crossmember. It feels nice to have clean parts after blasting and start building it up.

Yeah, honestly you have discussed it before about the time and labor vs. buying a frame done from AME, TCI, RS, No Limit, etc. I figured if I was going to do it, I wanted to do it right so that meant removing everything. "TheSilverFox" did the same thing in his build.

I plan on bolting the front and rear crossmembers back in and will square up the frame - then start building new crossmembers and will remove the old. The driveshaft loop you have in yours is one I am going to use so thanks for answering the questions around it.

[joedoh]

man, a punch list, a plan, a milestone end date, I gotta admit I am a little excited here.

Originally Posted by Desert1957

WOW , That's what I call a stripped down frame.

yeah its one thing to SAY you are going to go that far.. haha.

[focusedontheprize]

Originally Posted by joedoh

man, a punch list, a plan, a milestone end date, I gotta admit I am a little excited here.



yeah its one thing to SAY you are going to go that far.. haha.

Yeah well lets see how well I do with this plan!

Called the sandblaster and he is backed up for 2 weeks so I am going to drop it off and hope for the best. Should give me some place in the garage to start disassembling the cab and filling the holes.

[99 to Life]

you have a good foundation there. I would love to go the blaster route, but they are just too iffy in my area. My builds are always on a timeline and budget. Haven't gotten one fitted in yet. but maybe someday. be nice to powder coat it too but again just hard to cue that up and again more money. But some epoxy primer and a good topcoat would be real nice too.

[youngrodder]

Looks good. On my Suburban frame I had it chemically stripped and it turned out great. Looked like new when I got it back. The key was my frame was fully dissassembled for my Porterbuilt kit so that allowed them to fit it in their tank..

Marc

[focusedontheprize]

Originally Posted by youngrodder

Looks good. On my Suburban frame I had it chemically stripped and it turned out great. Looked like new when I got it back. The key was my frame was fully dissassembled for my Porterbuilt kit so that allowed them to fit it in their tank..

Marc

I was debating on that route too. My '65 was blasted and it came back beautiful too.

I love clean metal haha.

[focusedontheprize]

Not too many updates for this week. I finally was able to get the blaster situation figured out and dropped off the frame on Saturday. My epoxy arrived on Thursday so we are all set. The blaster told me I can expect to pick it up next week which is great.

[Desert1957]

Originally Posted by focusedontheprize

Not too many updates for this week. I finally was able to get the blaster situation figured out and dropped off the frame on Saturday. My epoxy arrived on Thursday so we are all set. The blaster told me I can expect to pick it up next week which is great.

Just noticed you removed the running board braces before blasting and coating, any reason?

[focusedontheprize]

Originally Posted by Desert1957

Just noticed you removed the running board braces before blasting and coating, any reason?

I wanted to remove all the rivets from the frame so the blasters could throughly clean the frame as much as possible. I plan on welding nuts on the inside of the frame rail and bolting them back into place.

[focusedontheprize]

I picked up the frame Saturday from the sandblaster. That was a challenge as I had to beat the rain to get it home. It looks great and I am jumping right in.

Started to fill the holes on the driver's side and tonight I cut out some plugs for the larger holes. I had one of my three allowed "why the h*ll am I doing all this work to a frame that people won't even see" thoughts. I figure I can get the holes filled and finished by the time I have my third. Hahaha.


Driver's side done

[Desert1957]

Any Updates?