All stepside trucks! - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

leemer4 · 12-13-2013, 09:07 AM

I think it's 5.25 in front and 4.75 in back and I misspoke, I think the wheels are 8.5. Coys had some limited selection and I went with what was available and close to what I wanted.

jus2qwk · 12-13-2013, 10:11 AM

here are some of mine and my dads. all of which are tore apart right now lol.

Dads GMC
its gonna be gone through new paint, engine, wood and wheels. hopefully I can talk him into dropping it a little more

The one Ill never sell
This one is getting the works.. I finally decided to do it the way I always wanted to. its getting porterbuilt suspension, new paint, wheels, new interior

Finally the one that I'm focusing on now is the Shop Truck, patinia truck
since I'm changing so much on the silver truck I decided not to put all the parts on a shelf and decided to just build another truck lol. it in a million pieces currently but the plan is to put use the silver trucks suspension, build a 350 that rattles house windows, have the interior and engine bay look like a new one with the rest of the truck basically like it is. here is pic of it when I bought it and a bad photoshop of what I had in mind.

Rich48 · 12-13-2013, 05:30 PM

Heres mine.
Owned it for 10 years

**GAc10boy** · 12-13-2013, 09:33 PM

Quote:

Originally Posted by leemer4

I think it's 5.25 in front and 4.75 in back and I misspoke, I think the wheels are 8.5. Coys had some limited selection and I went with what was available and close to what I wanted.

Thanks, leemer4. Appreciate the info. Hope to see it around Marietta soon!

Rod Run · 12-13-2013, 11:07 PM

Quote:

Originally Posted by leemer4

4-5 drop, 20x8 coys, 255/40 in front 255/45 rear

Quote:

Originally Posted by leemer4

I think it's 5.25 in front and 4.75 in back and I misspoke, I think the wheels are 8.5. Coys had some limited selection and I went with what was available and close to what I wanted.

Thanks for the info, but the words "I think" make me a little leery about ordering something that size

sharpmark · 12-14-2013, 03:54 AM

this is my work truck-driven every working day

as bought at swapmeet-fresh from texas

after full stripdown and home repaint

and on a 1000 km roadtrip to pickup new project chassis

leemer4 · 12-14-2013, 06:45 AM

Quote:

Originally Posted by Rod Run

Thanks for the info, but the words "I think" make me a little leery about ordering something that size

If it turns out this is he exact look you are going for, send me a note and I will get out to the shop and measure it all out. I just don't have it all in my head to be certain.

Inthuwind · 12-15-2013, 09:17 PM

Got the grill hoops installed and 2" blocks in rear done.

trichmond60 · 01-28-2014, 03:41 PM

Here's my old girl. I recently replaced the GMPP 350/290 with a Skip White 383 motor. Wow, she's a lot more fun now.

BugzC10 · 01-28-2014, 03:45 PM

Quote:

Originally Posted by trichmond60

Here's my old girl. I recently replaced the GMPP 350/290 with a Skip White 383 motor. Wow, she's a lot more fun now.

I'm liken that....kind-of stealthy looking. IYNWIM

Inthuwind · 01-28-2014, 04:06 PM

Yes indeed!!!

*Fitz* · 01-28-2014, 04:13 PM

Quote:

Originally Posted by The72Chevy

Post pix of nothing but stepside trucks!
Posted via Mobile Device
Posted via Mobile Device

It really is a 67 shortbed stepside!

Trust Me!

BugzC10 · 01-28-2014, 04:36 PM

Quote:

Originally Posted by trichmond60

Here's my old girl. I recently replaced the GMPP 350/290 with a Skip White 383 motor. Wow, she's a lot more fun now.

Hey trichmond60!
What's the specs? How low, suspension, wheel and tires sizes including back spacing. Looks wicked.

trichmond60 · 01-28-2014, 05:05 PM

Quote:

Originally Posted by BugzC10

Hey trichmond60!
What's the specs? How low, suspension, wheel and tires sizes including back spacing. Looks wicked.

Thanks BugzC10, I've had her for nine years now and it's been a bloody labor of love. Presently she has a Skip White 383 stroker with Dart heads and Dart block. The power goes through a Monster Transmission 700r4 and a posi 3.73 12 bolt. Motor is a beast, I couldn't be happier.

The truck has a 2" coil drop from ECE with a 2.5" drop spindles up front with a 6" ECE drop in the year. The tires are just some very old Radial T/As, 255/60/15 on '80s chevy rally rims, 15x8??. I REALLY want to put some 18" Coys on her with some very sticky rubber. I just gotta figure out how much meat I can place under her.

I can't wait until it warms up, on my commute to work it was -15 below!

slowcpe · 01-28-2014, 06:11 PM

Here's mine currently

trichmond60 · 01-28-2014, 07:10 PM

Slowcpe, that's one gorgeous truck!

Jmiller022 · 02-04-2014, 03:27 PM

Quote:

Originally Posted by slowcpe

Here's mine currently

how much drop and what size tire/rim and backspacing? looks sharp.

Jmiller022 · 02-04-2014, 03:28 PM

Quote:

Originally Posted by trichmond60

Here's my old girl. I recently replaced the GMPP 350/290 with a Skip White 383 motor. Wow, she's a lot more fun now.

could you take a picture of your exhaust routing? I like the in front of the tire look.

slowcpe · 02-04-2014, 04:12 PM

Quote:

Originally Posted by trichmond60

Slowcpe, that's one gorgeous truck!

Thank you!

Quote:

Originally Posted by Jmiller022

how much drop and what size tire/rim and backspacing? looks sharp.

Thank you!

Unsure on actual drop. I know it's got McGaughy drop spindles, rear drop springs and 2" drop blocks. The front stock springs have been cut which yields a harsh ride and almost undriveable since the front fenders sit below the top of the tire. I have air ride sitting in the bed awaiting install.

Wheels are 18x8 and 18x9.5 Riddlers. BS I believe are 4.5 front and 5.5 rear.

Motorhead-47 · 02-04-2014, 06:57 PM

'67 Resto mod. GM Crate 454 backed with a built 700R4

BugzC10 · 02-04-2014, 08:13 PM

[QUOTE=Motorhead-47;6508147]'67 Resto mod. GM Crate 454 backed with a built 700R4

That is one sweet looking ride...wow

Motorhead-47 · 02-04-2014, 08:32 PM

Quote:

Originally Posted by BugzC10

Quote:

Originally Posted by Motorhead-47

'67 Resto mod. GM Crate 454 backed with a built 700R4

That is one sweet looking ride...wow

Thanks. I'd like to claim I built it but truth is after 2 years of searching for a suitable truck to build and looking at dozens of rotted out trucks, I stumbled across this one which was 90% finished when I bought it. I would have spent more on the drivetrain alone (nearly everything is new) than I paid the guy for this entire truck.

CBrown680 · 02-04-2014, 08:37 PM

Here is my 67 small window. I am not so patiently for new wheels and tires! Plasti dipped them to give them a fresh look.

**Boog** · 02-04-2014, 08:41 PM

Motorhead. That's one great looking stepper right there. Great find.

BugzC10 · 02-04-2014, 08:44 PM

Quote:

Originally Posted by Motorhead-47

Thanks. I'd like to claim I built it but truth is after 2 years of searching for a suitable truck to build and looking at dozens of rotted out trucks, I stumbled across this one which was 90% finished when I bought it. I would have spent more on the drivetrain alone (nearly everything is new) than I paid the guy for this entire truck.

It's obvious your running Rally wheels. What are your tire sizes and how low?

12-13-2013, 09:07 AM	#126
leemer4 Registered User Join Date: May 2009 Location: Marietta, GA Posts: 28	Re: All stepside trucks! I think it's 5.25 in front and 4.75 in back and I misspoke, I think the wheels are 8.5. Coys had some limited selection and I went with what was available and close to what I wanted.

12-13-2013, 10:11 AM	#127
jus2qwk Registered User Join Date: Mar 2011 Location: Wytheville, Virginia Posts: 591	Re: All stepside trucks! here are some of mine and my dads. all of which are tore apart right now lol. Dads GMC its gonna be gone through new paint, engine, wood and wheels. hopefully I can talk him into dropping it a little more The one Ill never sell This one is getting the works.. I finally decided to do it the way I always wanted to. its getting porterbuilt suspension, new paint, wheels, new interior Finally the one that I'm focusing on now is the Shop Truck, patinia truck since I'm changing so much on the silver truck I decided not to put all the parts on a shelf and decided to just build another truck lol. it in a million pieces currently but the plan is to put use the silver trucks suspension, build a 350 that rattles house windows, have the interior and engine bay look like a new one with the rest of the truck basically like it is. here is pic of it when I bought it and a bad photoshop of what I had in mind. __________________ Corey Jones Designs CoreyJonesDesigns on instagram Ole Silver- 1967 stepside http://www.hotrod.com/articles/1103c...chevrolet-c10/ http://67-72chevytrucks.com/vboard/s...d.php?t=598758

12-13-2013, 05:30 PM	#128
Rich48 Registered User Join Date: May 2009 Location: United Kingdom Posts: 11	Re: All stepside trucks! Heres mine. Owned it for 10 years Attached Images

12-14-2013, 03:54 AM	#131
sharpmark Registered User Join Date: Mar 2009 Location: rotorua/new zealand Posts: 161	Re: All stepside trucks! this is my work truck-driven every working day as bought at swapmeet-fresh from texas after full stripdown and home repaint and on a 1000 km roadtrip to pickup new project chassis __________________ 1969 stepside-305/4spd/12 bolt posi http://67-72chevytrucks.com/vboard/s...d.php?t=477157 1968 pontiac lemans convertible-350/pwrglde/10 bolt 1934 oldsmobile sedan-350/350/12 bolt posi 1930 model a pickup-350/350/jag ind 1928 model a roadster-283/350/9"

12-15-2013, 09:17 PM	#133
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: All stepside trucks! Got the grill hoops installed and 2" blocks in rear done. Attached Images __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-28-2014, 03:41 PM	#134
trichmond60 Registered User Join Date: Feb 2010 Location: Fontana, WI Posts: 6	Re: All stepside trucks! Here's my old girl. I recently replaced the GMPP 350/290 with a Skip White 383 motor. Wow, she's a lot more fun now. Attached Images __________________ 1972 C10 Stepside Skip White 383 Monster 700r4 4.5" & 6" drop

01-28-2014, 04:06 PM	#136
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: All stepside trucks! Yes indeed!!! __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-28-2014, 06:11 PM	#140
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: All stepside trucks! Here's mine currently __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

01-28-2014, 07:10 PM	#141
trichmond60 Registered User Join Date: Feb 2010 Location: Fontana, WI Posts: 6	Re: All stepside trucks! Slowcpe, that's one gorgeous truck! __________________ 1972 C10 Stepside Skip White 383 Monster 700r4 4.5" & 6" drop

02-04-2014, 06:57 PM	#145
Motorhead-47 Registered User Join Date: Sep 2013 Location: Niceville, Florida Posts: 45	Re: All stepside trucks! '67 Resto mod. GM Crate 454 backed with a built 700R4 Last edited by Motorhead-47; 02-05-2014 at 07:28 PM.

02-04-2014, 08:13 PM	#146
BugzC10 Registered User Join Date: Oct 2012 Location: Rose Hill Kansas Posts: 1,351	Re: All stepside trucks! [QUOTE=Motorhead-47;6508147]'67 Resto mod. GM Crate 454 backed with a built 700R4 That is one sweet looking ride...wow __________________ 1970 C10 Short Stepper with 71/72 front clip.

02-04-2014, 08:37 PM	#148
CBrown680 Registered User Join Date: Sep 2013 Location: Frisco, TX Posts: 49	Re: All stepside trucks! Here is my 67 small window. I am not so patiently for new wheels and tires! Plasti dipped them to give them a fresh look. Attached Images

02-04-2014, 08:41 PM	#149
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: All stepside trucks! Motorhead. That's one great looking stepper right there. Great find. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.