KS 1972 chevy C10 with a 4speed getting parted now - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 09-08-2014, 05:04 PM

Ed, I will get better pics of them. Thanks Randy

cdp · 09-09-2014, 12:34 AM

Looking for air cleaner and pre heat tube and oil fill tube, grille emblem and antenna with no pitting on base and nut shipped to 44236

teeitup · 09-09-2014, 07:03 AM

I have air cleaner, spacer, heat shield tube. My grill emblems are not perfect. No antennas right now. Thanks Randy

EdSevered · 09-11-2014, 10:16 AM

Hey Randy, just a gentle reminder about the photos of the Bowtie Grill Emblem and the Grill Support.

Thanks! -Ed

teeitup · 09-11-2014, 10:37 AM

Ed, sorry forgot to post pics of emblem on this thread, I have them on my 71 thread, I will bring that thread to top.. It has one small crack/scratch in blue. On the brace I have 20 of those here, I can pick out the best one.

EdSevered · 09-11-2014, 11:30 AM

Sounds like the condition of your bowtie is about the same as the one I already have. So, I'll skip that. How much for the Grill Support? -Ed

Langsc0 · 09-30-2014, 10:45 AM

Do you still have the clutch pedal assy. if so how much

Brave71 · 09-30-2014, 11:00 AM

Randy, I need the bolt and nut that holds the brake rod to the brake peddle arm.

teeitup · 09-30-2014, 12:33 PM

EdSevered, did I reply in a pm to you? My memory sucks anymore, sorry

Langsco, $38 for a clutch pedal assembly

Brave71, I have a few of those, send me your shipping info again, and I will get one in mail to you

Thanks Randy

**70CHEVYBB** · 09-30-2014, 10:06 PM

how about rag joint on the gear box ?

**19702wdc10** · 10-01-2014, 11:58 AM

Hello,

I am looking for a clutch delete plate and the starter bolts for a TH350 inline six setup if different than V8 bolts

Thanks
Joe

teeitup · 10-01-2014, 08:10 PM

70chevyBB, sorry no good ones

19702wdC10, Joe, I have deletes, and I have alot of starter bolts, but I don't remember what size you need, sorry

Thanks Randy

teeitup · 10-01-2014, 08:12 PM

Pic for Scott

teeitup · 10-01-2014, 08:12 PM

Pic for John H

John H. · 10-01-2014, 08:40 PM

Randy,

I would like the one without the orange paint.

Let me know how much?

teeitup · 10-02-2014, 06:02 PM

John H was this the other thing?

John H. · 10-02-2014, 06:09 PM

Thanks Randy,

I actually have an NOS one from a kit. I just did not know if it was correct.

Just the fitting please.

rusted72' · 10-03-2014, 01:03 AM

Hey there Randy,
How much for:
-the set of "custom 10" emblems you have pictured
-power steering brackets, pulley and the piece that holds down the power steering hoses
- you have a set of original style hose clamps pictured...if they are for the radiator hoses, I would like to add them also
---shipped to 92805

thanks

teeitup · 10-03-2014, 07:47 AM

rusted72, for the emblems $10 and ps hose clamp $5 plus shipping, sorry sold the other stuff already. Thanks Randy

rusted72' · 10-04-2014, 02:56 AM

Randy-
can you add the water pump pulley?
how much total with shipping to 92805?
thanks you,
dario

teeitup · 10-04-2014, 09:31 AM

Dario, sorry the water pump pulley is sold, Thanks Randy

rusted72' · 10-04-2014, 10:26 AM

Quote:

Originally Posted by teeitup

rusted72, for the emblems $10 and ps hose clamp $5 plus shipping, sorry sold the other stuff already. Thanks Randy

ok....I will wait for the other stuff...whats my total shipped to 92805?
thanks

teeitup · 10-04-2014, 11:26 AM

I'll get total Sun, Thanks

**19702wdc10** · 10-06-2014, 06:47 PM

Quote:

Originally Posted by teeitup

70chevyBB, sorry no good ones

19702wdC10, Joe, I have deletes, and I have alot of starter bolts, but I don't remember what size you need, sorry

Thanks Randy

Randy,

Can you send picture and price for the delete plate, I will hold off on the bolts for now.

Thanks
Joe

teeitup · 10-06-2014, 08:15 PM

I have a individual thread on deletes, I just brought it top of parts page, Thanks

09-08-2014, 05:04 PM	#126
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Ed, I will get better pics of them. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-09-2014, 12:34 AM	#127
cdp Registered User Join Date: Apr 2011 Location: AKRON,OH Posts: 81	Re: 1972 chevy C10 with a 4speed getting parted now Looking for air cleaner and pre heat tube and oil fill tube, grille emblem and antenna with no pitting on base and nut shipped to 44236

09-09-2014, 07:03 AM	#128
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now I have air cleaner, spacer, heat shield tube. My grill emblems are not perfect. No antennas right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-11-2014, 10:16 AM	#129
EdSevered Registered User Join Date: Oct 2013 Location: Wisconsin Posts: 162	Re: 1972 chevy C10 with a 4speed getting parted now Hey Randy, just a gentle reminder about the photos of the Bowtie Grill Emblem and the Grill Support. Thanks! -Ed

09-11-2014, 10:37 AM	#130
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Ed, sorry forgot to post pics of emblem on this thread, I have them on my 71 thread, I will bring that thread to top.. It has one small crack/scratch in blue. On the brace I have 20 of those here, I can pick out the best one. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-11-2014, 11:30 AM	#131
EdSevered Registered User Join Date: Oct 2013 Location: Wisconsin Posts: 162	Re: 1972 chevy C10 with a 4speed getting parted now Sounds like the condition of your bowtie is about the same as the one I already have. So, I'll skip that. How much for the Grill Support? -Ed

09-30-2014, 10:45 AM	#132
Langsc0 Registered User Join Date: Nov 2011 Location: Four Oaks, NC Posts: 1	Re: 1972 chevy C10 with a 4speed getting parted now Do you still have the clutch pedal assy. if so how much

09-30-2014, 11:00 AM	#133
Brave71 Registered User Join Date: Sep 2013 Location: Henderson, NV Posts: 304	Re: 1972 chevy C10 with a 4speed getting parted now Randy, I need the bolt and nut that holds the brake rod to the brake peddle arm.

09-30-2014, 12:33 PM	#134
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now EdSevered, did I reply in a pm to you? My memory sucks anymore, sorry Langsco, $38 for a clutch pedal assembly Brave71, I have a few of those, send me your shipping info again, and I will get one in mail to you Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

09-30-2014, 10:06 PM	#135
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 690	Re: 1972 chevy C10 with a 4speed getting parted now how about rag joint on the gear box ?

10-01-2014, 11:58 AM	#136
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: 1972 chevy C10 with a 4speed getting parted now Hello, I am looking for a clutch delete plate and the starter bolts for a TH350 inline six setup if different than V8 bolts Thanks Joe

10-01-2014, 08:10 PM	#137
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now 70chevyBB, sorry no good ones 19702wdC10, Joe, I have deletes, and I have alot of starter bolts, but I don't remember what size you need, sorry Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-01-2014, 08:12 PM	#138
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Pic for Scott Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-01-2014, 08:12 PM	#139
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Pic for John H Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-01-2014, 08:40 PM	#140
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: 1972 chevy C10 with a 4speed getting parted now Randy, I would like the one without the orange paint. Let me know how much?



Register or Log In To remove these advertisements.

10-02-2014, 06:02 PM	#141
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now John H was this the other thing? Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-02-2014, 06:09 PM	#142
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: 1972 chevy C10 with a 4speed getting parted now Thanks Randy, I actually have an NOS one from a kit. I just did not know if it was correct. Just the fitting please.

10-03-2014, 01:03 AM	#143
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 1972 chevy C10 with a 4speed getting parted now Hey there Randy, How much for: -the set of "custom 10" emblems you have pictured -power steering brackets, pulley and the piece that holds down the power steering hoses - you have a set of original style hose clamps pictured...if they are for the radiator hoses, I would like to add them also ---shipped to 92805 thanks

10-03-2014, 07:47 AM	#144
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now rusted72, for the emblems $10 and ps hose clamp $5 plus shipping, sorry sold the other stuff already. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-04-2014, 02:56 AM	#145
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: 1972 chevy C10 with a 4speed getting parted now Randy- can you add the water pump pulley? how much total with shipping to 92805? thanks you, dario

10-04-2014, 09:31 AM	#146
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now Dario, sorry the water pump pulley is sold, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-04-2014, 11:26 AM	#148
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now I'll get total Sun, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-06-2014, 08:15 PM	#150
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: 1972 chevy C10 with a 4speed getting parted now I have a individual thread on deletes, I just brought it top of parts page, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.