The Doc & Kim 69 build

[zicc1835]

Bling bling LOL ...now to put it all back together

[zicc1835]

Originally Posted by GR8-68

Nice, the springs look great

I need some of your talent

thanks Larry
you got plenty more than me Im starting to like this powder coating my daughters Boy friend replaced this electric panel box so he brought it home for me ...we are going to make a big A$$ oven out of it. 5 high 3+ wide 20" deep

[zicc1835]

Originally Posted by jaros44sr

nice work on all the pc stuff, very clever methods. keep at it

thanks Jim
were gonna make a bigger hot box

[GR8-68]

That is a great idea Jess !! How hot does the oven need to get to cure the powder coating out?

[zicc1835]

400 degrees ..I plan on using the elements/thermostats/glass/light etc. from my existing oven ..whats nice about the cabinet 2 doors easy in and out,(might be able to get trailing arms in it, although i sent mine out to the professional already) its thick gauge plenty room for racks. not sure how we will insulate it yet. I have a few ideas

[zicc1835]

took the 72 out today left a signature in the street my wife asked if i was going to grow up i said eventually....maybe

[zicc1835]

then i struggled with these.........

[GR8-68]

very nice

[zicc1835]

Cant help myself ....I bought these a while ago from a board who converted to coil over....they were scratched up pretty good sooooo here we go more shake and bake👀🙈 got one down to the metal tonight ...traveling tomorrow be back Friday get the other A arm prepped Saturday I also p coated the last spring tonight

[zicc1835]

I picked these up from p-coat yesterday

[zicc1835]

was able to put some powder on one drop spindle today, I'm pleased......
ill get the other done tomorrow
continued prepping the control arms today they been a PIA to get all the old powder coat off

[GR8-68]

You are doing a wonderful job powder coating your own stuff

[zicc1835]

thanks Larry.... its a little time consuming but rewarding in a few ways

[GR8-68]

Originally Posted by zicc1835

thanks Larry.... its a little time consuming but rewarding in a few ways

That is why I like to do my own work, I may not know how but I will learn one way or another

[zicc1835]

finally got one arm totally prepped

[zicc1835]

powdered

[zicc1835]

baked

[GR8-68]

You are doing some fine work with your powder coating system This is going to be one cool ride when it is completed

[zicc1835]

thanks getting closer to reassemble ....and anxious

[jaros44sr]

OK Jess, when are you going public with your great work on PCing, I've got some small parts that need your attention.....

[zicc1835]

not public but would be happy to do a few small parts for you

[jaros44sr]

Originally Posted by zicc1835

not public but would be happy to do a few small parts for you

thanks Jesse

[zicc1835]

finished the other lower C arm today so tomorrow i will see if i can install the ball joints without scratching them

[GR8-68]

Very nice work Jesse, this is going to look amazing. You can put them in without scratching them, I did it

[zicc1835]

Thanks Larry .. I brought them to my friends shop we pressed them in all 3 of us LOLone holding the arm one positioning and me working the jack it was comical no scratches I'm pleased thanks again for the kind words