Project Vitamin C-10 - Page 60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alan's Classic · 07-02-2009, 06:48 PM

Quote:

Originally Posted by 1964C10

Wow is that a silver metallic flake that you are using on the upper portion of the cab? That looks really good with the orange. Have you posted a picture of the truck from a distance and I missed it

Would you recommend rebuilding the vent window or going with the delete kit and making it a single window? or is that really just a personal choice?

Yes, it's silver metallic, iposted some outside pics a couple weeks ago.

Quote:

Originally Posted by ruffrida2005

I'm going to recomend that you go with a vent window rebuild. No one sells a single window for our trucks, because of the fact that it's not secure when the window isn't all the way up. Everyone that has had it done, had the glass cut and peiced a kit together! That's my understanding from autoloc. Truckin did a spread on it and also stated the same fact.

Looks good Alan cant wait for your window thread!

and i agree with the vent windows

Quote:

Originally Posted by jgh64pkup

i like the vent windows especially with no a/c

Quote:

Originally Posted by MacAttack

Thanks, Alan. That's one I've got to face soon - as the guy that ripped my rig off roached both sides in doing so. Great pictures. (This is how it's done, Joe).

Mac.

Thanks Mac, Once I get my act together I will do a full step by step.

Quote:

Originally Posted by hAetWagon

I'm going to go with a single window conversion myself. I'll be utilizing a power regulator of some sort scavenged from somethin or other...

Good luck

I've seen a 70 Chevy with one piece windows. Even the owner wasn't happy. If someone decides to do it, mock it up before paint. That way the area around where the vent glass goes can be repaired to make the appearance flow more. On his you have to push out on the glass as it get close to the top of the track. The glass leans inside, why, I don't know. I would much rather do power windows with the factory stuff.

hAetWagon · 07-02-2009, 07:40 PM

I've heard, I'd like to address it and try something new, it's a ways down the road though.

Alan's Classic · 07-03-2009, 11:39 AM

Quote:

Originally Posted by hAetWagon

I've heard, I'd like to address it and try something new, it's a ways down the road though.

I tried something new (to me) with putting the impala dash in. It was very trying but well worth it in the end. If you like your idea and have a vision, I'd say go for it. You will learn alot and you can share your experiences with us.

daverod · 07-03-2009, 12:41 PM

I'm glad you did the dash thing, otherwise I would'nt have one in my truck.

Still half done but it getting there. You've help me a lot Allan thanks for your time. I'm sure others feel the same.

Strodder · 07-03-2009, 12:46 PM

daverod · 07-03-2009, 12:52 PM

Just kiddin

hAetWagon · 07-03-2009, 02:49 PM

Agreed, and thanks for the support. School is picking up a TON of momentum. We had our first exam and I demolished the grading curve ...making 45 guys fail...

I was in class thinking.... "What would Allan Do?" You'd be proud... lol

daverod · 07-03-2009, 03:22 PM

Quote:

Originally Posted by hAetWagon

Agreed, and thanks for the support. School is picking up a TON of momentum. We had our first exam and I demolished the grading curve ...making 45 guys fail...

I was in class thinking.... "What would Allan Do?" You'd be proud... lol

Good to hear you're doing so well . How many people in your class?

MacAttack · 07-03-2009, 03:32 PM

Quote:

Originally Posted by daverod

Just kiddin

* note the edit - didn't want Alan to release his hounds.

daverod · 07-03-2009, 03:34 PM

Woof,woof

Alan's Classic · 07-03-2009, 03:51 PM

Quote:

Originally Posted by daverod

I'm glad you did the dash thing, otherwise I would'nt have one in my truck.

Still half done but it getting there. You've help me a lot Allan thanks for your time. I'm sure others feel the same.

Quote:

Originally Posted by Strodder

X2

Quote:

Originally Posted by daverod

Just kiddin

Whose the

Quote:

Originally Posted by hAetWagon

Agreed, and thanks for the support. School is picking up a TON of momentum. We had our first exam and I demolished the grading curve ...making 45 guys fail...

I was in class thinking.... "What would Allan Do?" You'd be proud... lol

WWAD = What would Alan do. Now that's funny.

J/K What kind of questions are on the test, give us an example.

Quote:

Originally Posted by MacAttack

* note the edit - didn't want Alan to release his hounds.

When did we get our edit button back?

daverod · 07-03-2009, 03:55 PM

Not you

Just givin that Strodder a hard time.

MacAttack · 07-03-2009, 04:04 PM

Quote:

Originally Posted by daverod

Just givin that Strodder a hard time.

Mac.

Strodder · 07-03-2009, 09:41 PM

Quote:

Originally Posted by daverod

Not you

Just givin that Strodder a hard time.

WHAT, WHAT?

hAetWagon · 07-03-2009, 10:21 PM

Quote:

Originally Posted by Alan's Classic

Whose the

WWAD = What would Alan do. Now that's funny.

J/K What kind of questions are on the test, give us an example.

When did we get our edit button back?

4. Technician A says that magnesium parts should be welded using a GMA (MIG) butt joint with backing.

Technician B says that when welding magnesium, a magnesium electrode wire should be used to help ensure good weld quality.

Who is right and why?

*Technician A says that a tailor-rolled blank may have different types of steel designed into each part.

Technician B says that a tailor-rolled blank is a seamless structure with varying thicknesses.

Who is right?

And if you catch your edit fast enough (within 5 minutes) you get your edit button back before it's permanent.

jason65 · 07-03-2009, 10:33 PM

Lookin good Alan.

70 Suburban · 07-03-2009, 10:34 PM

nope b then a

i didnt see the why.. b kinda.. well you can tig it. so mig only whould not be correct.

a. because it hould be the same thickness.

Alan's Classic · 07-03-2009, 11:10 PM

Quote:

Originally Posted by hAetWagon

4. Technician A says that magnesium parts should be welded using a GMA (MIG) butt joint with backing.

Technician B says that when welding magnesium, a magnesium electrode wire should be used to help ensure good weld quality.

Who is right and why?

*Technician A says that a tailor-rolled blank may have different types of steel designed into each part.

Technician B says that a tailor-rolled blank is a seamless structure with varying thicknesses.

Who is right?

And if you catch your edit fast enough (within 5 minutes) you get your edit button back before it's permanent.

Don't worry about what I would do......I'd run out of the building screaming.

The edit button is back like it use to be. I can go back and edit stuff I posted yesterday or even 2 years ago. Thank you to the staff.

Quote:

Originally Posted by jason65

Lookin good Alan.

Thanks Jason

ruffrida2005 · 07-03-2009, 11:48 PM

Is the answer I'm going to get a F on this quiz. Happy 4th everyone. wont be on tomorrow going to spend it at the lake!

Strodder · 07-04-2009, 10:39 AM

HAPPY 4TH everybody.

hAetWagon · 07-04-2009, 11:32 AM

Quote:

Originally Posted by 70 Suburban

nope b then a

i didnt see the why.. b kinda.. well you can tig it. so mig only whould not be correct.

a. because it hould be the same thickness.

[threadjack]

In regards to structural automotive applications you are not allowed to repair or weld on Magnesium or Ultra High Strength Steel at all.

The tailor rolled blank is one seamless piece that has a hydraulic roller form it to create thin spots for crumple zones.
[/threadjack]
I'll take whodunits for 1000 Alan.

Where's pics?

Strodder · 07-04-2009, 11:40 AM

Quote:

Originally Posted by hAetWagon

[threadjack]

In regards to structural automotive applications you are not allowed to repair or weld on Magnesium or Ultra High Strength Steel at all.

The tailor rolled blank is one seamless piece that has a hydraulic roller form it to create thin spots for crumple zones.
[/threadjack]
I'll take whodunits for 1000 Alan.

Where's pics?

Magnesium can catch fire? Am I right? I know VW engine cases are made of it, and will make a very bright camp fire that's hard to put out.

**Captainfab** · 07-04-2009, 01:49 PM

Quote:

Originally Posted by Strodder

Magnesium can catch fire? Am I right? I know VW engine cases are made of it, and will make a very bright camp fire that's hard to put out.

Yes magnesium will burn and the only way to put it out is to eliminate the oxygen from it.

Alan's Classic · 07-04-2009, 02:39 PM

Not in the shop today. Spending my day in the kitchen..............no not cookin. Paintin' walls. Yeeeeee.....Hawwwww. Ya'll have a safe and happy 4th

hAetWagon · 07-04-2009, 06:07 PM

I'll set an H100 off in the kitchen for ya..

07-02-2009, 07:40 PM	#1477
hAetWagon Schlongbed MEMBER (heh)#15 Join Date: Jun 2005 Location: Sacramento Posts: 232	Re: My 1965 build thread I've heard, I'd like to address it and try something new, it's a ways down the road though. __________________ 82 Chevy Blazer 4wd.RIP 1965 Chevy C10,350V8 Get it reliable,then puttin' it in the weeds.. "Old truck, all new headaches."

07-03-2009, 12:41 PM	#1479
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread I'm glad you did the dash thing, otherwise I would'nt have one in my truck. Still half done but it getting there. You've help me a lot Allan thanks for your time. I'm sure others feel the same.

07-03-2009, 12:46 PM	#1480
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-03-2009, 12:52 PM	#1481
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread Just kiddin Last edited by daverod; 07-03-2009 at 03:21 PM.

07-03-2009, 02:49 PM	#1482
hAetWagon Schlongbed MEMBER (heh)#15 Join Date: Jun 2005 Location: Sacramento Posts: 232	Re: My 1965 build thread Agreed, and thanks for the support. School is picking up a TON of momentum. We had our first exam and I demolished the grading curve ...making 45 guys fail... I was in class thinking.... "What would Allan Do?" You'd be proud... lol __________________ 82 Chevy Blazer 4wd.RIP 1965 Chevy C10,350V8 Get it reliable,then puttin' it in the weeds.. "Old truck, all new headaches." Last edited by hAetWagon; 07-03-2009 at 02:50 PM.

07-03-2009, 03:34 PM	#1485
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread Woof,woof __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-03-2009, 03:55 PM	#1487
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: My 1965 build thread Not you Just givin that Strodder a hard time. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

07-03-2009, 10:33 PM	#1491
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: My 1965 build thread Lookin good Alan.

07-03-2009, 10:34 PM	#1492
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: My 1965 build thread nope b then a i didnt see the why.. b kinda.. well you can tig it. so mig only whould not be correct. a. because it hould be the same thickness. __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F*D the wife drive...(cant fix women) Last edited by 70 Suburban; 07-04-2009 at 01:22 AM.*

07-03-2009, 11:48 PM	#1494
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: My 1965 build thread Is the answer I'm going to get a F on this quiz. Happy 4th everyone. wont be on tomorrow going to spend it at the lake! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

07-04-2009, 10:39 AM	#1495
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: My 1965 build thread HAPPY 4TH everybody. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-04-2009, 02:39 PM	#1499
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: My 1965 build thread Not in the shop today. Spending my day in the kitchen..............no not cookin. Paintin' walls. Yeeeeee.....Hawwwww. Ya'll have a safe and happy 4th __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

07-04-2009, 06:07 PM	#1500
hAetWagon Schlongbed MEMBER (heh)#15 Join Date: Jun 2005 Location: Sacramento Posts: 232	Re: My 1965 build thread I'll set an H100 off in the kitchen for ya.. __________________ 82 Chevy Blazer 4wd.RIP 1965 Chevy C10,350V8 Get it reliable,then puttin' it in the weeds.. "Old truck, all new headaches."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.