1969 SuperBurb build-up (Bagged and Blown!)

[AnotherWs6]

Are there actually dash pads designed specifically for our trucks that have gauge pods in them? I recently purchased a pair of O2 sensors and gauges along with a myriad of gauge pods. I want to run the O2's so I can dial my carb in for all/different situations. I bought a bunch of pods so that I can play around with location etc. A dash pad with pods might be right up my ally. Any more info?

[Hart_Rod]

Originally Posted by Dieselwrencher

The cost of the DD clusters aren't cheap, but like Rob said. By the time you buy all the gauges to do what one of these clusters has integrated in it, you will have a lot of gauges every where and a lot of money in it. That's why I went with the VHX in my truck. There just isn't a good place to put extra gauges in these trucks and have them visible. Sue, you can get an expensive dash pad with gauges in it. But they aren't in an ideal location either. Just my .02 on them.

Originally Posted by AnotherWs6

Are there actually dash pads designed specifically for our trucks that have gauge pods in them? I recently purchased a pair of O2 sensors and gauges along with a myriad of gauge pods. I want to run the O2's so I can dial my carb in for all/different situations. I bought a bunch of pods so that I can play around with location etc. A dash pad with pods might be right up my ally. Any more info?

These people used to make them: http://www.justdashes.com/gallery/

[shearjs]

Rob, I use the Bluetooth all the time to stream music that I have saved in my phone and occasionally from Pandora. Works great!

[AnotherWs6]

What about hands free?

[Hart_Rod]

Originally Posted by shearjs

Rob, I use the Bluetooth all the time to stream music that I have saved in my phone and occasionally from Pandora. Works great!

I can't wait!

Originally Posted by AnotherWs6

What about hands free?

The RetroSound fourth generation Model Two Radios are the most technologically-advanced radio ever made for your classic vehicle, offering a classic in-dash look and featuring modern playback capabilities from today's digital music sources and wireless Bluetooth® enabled devices.
This is the only Made-For-iPod® radio for vintage vehicles that allows iPod/iPhone® direct control and charging via USB input, and also the only with built-in Bluetooth® connectivity for hands-free phone calls and wireless audio streaming. It also features an AM/FM Tuner with Radio Display System(RDS) to display artist and title information on the display screen.

This is a breakthrough classic car radio offering flexible mounting options with the Patented "InfiniMount" adjustable shaft system, optional faceplete extension cable and installation kits available for most popular classic vehicles. You can talk hands-free, stream audio programming to the receiver with your smartphone, connect your MP3 and WMA music files or USB thumb drive to the two rear USB ports. You'll also find two auxiliary inputs on the rear of the receiver for other sources, like a satellite radio tuner.

The optional Vintage Radio Dial Screen Protectors allow you to add authenticity and style to your receiver while still allowing you to see the digital numbers behind the graphics. They're easy to apply, they look great, and they'll help prevent scratches and everyday damage. You can also choose from 32,0000 backlight colors so the adjustable-angle LCD display will look just right in your dash.

General Features: •AM/FM RDS tuner with 30 pre-sets
•Radio Display System (RDS) capable tuner to view artists name and song titles on FM stations that broadcast text information(no built-in CD player)
•Built-in amplifier (25 watts RMS/45 peak x 4 channels)
•Built-in Bluetooth® for hands-free calling and audio streaming
•Plays MP3 and WMA music files from external sources (no internal CD player)
•InfiniMount shaft/bracket system fits most car dash openings
•Adjustable-angle LCD display with 32,0000 backlight color choices
•Wide variety of vehicle dash kits available to match your application
•Radio body can be mounted remotely with optional extension cable
Audio Features:
•AM/FM RDS tuner with 30 pre-sets (18 FM/12 AM)
•User-controlled bass/treble/fader/balance adjustment
•25 watts x 4 channel RMS power amplifier
Expandability:
•iPod/iPhone® direct control and charging via USB input
•Inputs: Dual rear auxiliary and USB inputs
•Outputs: 6-channel preamp outputs (2.85-volt front, rear, and subwoofer)
Note: Vehicle Installation Kits are sold separately below and are required to complete radio installation.

[AnotherWs6]

I was wondering how the call quality is.

[shearjs]

I haven't used the hands free calling feature. I never even hooked the mic up. With the road noise and exhaust it would probably be difficult to get a good quality phone call in my ol beater.

[Hart_Rod]

I finally have my AC lines and inside unit reinstalled on the Burb. AND I also added a 2 Ton AC unit to cool my shop! This should make finishing this project up little more bearable, .

Rob

[Dieselwrencher]

That's a cool deal on the garage a/c!

[gringoloco]

Haha, cool deal. I'm a little jealous

[Hart_Rod]

Originally Posted by Dieselwrencher

That's a cool deal on the garage a/c!

Originally Posted by gringoloco

Haha, cool deal. I'm a little jealous

Thanks guys! It's been nice to work on the burb when it's not 95 degrees and 100% humidity! I should have done this a long time ago, :lol. I also have a guy scheduled to finish the sheetrock the first part of October, which will help also.

Back to the Burb.....Still waiting on my gauges, but I'm knocking small things off of my punch list, wiring and other miscellaneous stuff. The goal is to have everything done that I can so that when the gauges arrive I can wire them up and start it.....we'll see..... Here's some pictures of the AC control panel and the RetroSound stereo installed.

[Dieselwrencher]

Very nice! I'm sorry, to ask, because it's probably in the thread, but is that a/c control a vintage air product?

[Hart_Rod]

Originally Posted by Dieselwrencher

Very nice! I'm sorry, to ask, because it's probably in the thread, but is that a/c control a vintage air product?

Dakota Digital

[NPilot1975]

The burb is looking good. Looks like you can almost see the light at the end of the tunnel. I want your shop!!!
Posted via Mobile Device

[Advanced Design]

The ac control looks good..kinda discrete. Congratulations on the shop ac!

[Dieselwrencher]

Originally Posted by Hart_Rod

Dakota Digital

Thanks! I need to see if I can make that work in my 40 Ford. I like the looks of that.

[Hart_Rod]

Originally Posted by NPilot1975

The burb is looking good. Looks like you can almost see the light at the end of the tunnel. I want your shop!!!
Posted via Mobile Device

Thanks! How's the Blazerette coming along?

Originally Posted by Advanced Design

The ac control looks good..kinda discrete. Congratulations on the shop ac!

Thanks! It's really nice working without sweat dripping everywhere!

Originally Posted by Dieselwrencher

Thanks! I need to see if I can make that work in my 40 Ford. I like the looks of that.

I'm sure you can, it's pretty small and fairly easy to install.

[Heliarcn]

Super clean and very symmetrical looking dash. Coming together nicely.

[Hart_Rod]

Originally Posted by Heliarcn

Super clean and very symmetrical looking dash. Coming together nicely.

Thanks! I've been wrapping up a lot of small details prepping for a light off as soon as my gauges come in. If things go as planned that could be as early as next week, !

[Hart_Rod]

All AC/heat lines crimped and installed. Not the "neatest" way to do them, but they should work. Will pull a vacuum on the complete system tonight and hopefully no leaks.... One more thing crossed off of the list, !

[kikkegek]

well, nothing sloppy there!

do you crimp them yourself?

[Hart_Rod]

Originally Posted by kikkegek

well, nothing sloppy there!

do you crimp them yourself?

Thanks! I bought a crimping tool from McMasters and did all of the crimping myself.

[knomadd]

That looks pretty good Rob. I did something similar on my 71. Going to keep it like that when I do the LS swap too. It's not as fancy as the all hidden stuff, but I like the way it looks.

[ChuckDriver]

Nicely done!

[Dieselwrencher]

Very nice! Getting the ac done is a big accomplishment IMO! Nice work.