What Did You Do With Your Truck Today ? - Page 60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Daze57 · 11-16-2012, 06:05 PM

OrrieG

cool with the grandkids ! theres your needed helping hands

mknittle · 11-17-2012, 11:21 AM

Quote:

Originally Posted by Speedbumpauto

Wasn't going to post, but I think I turned out great and I've had beer. Fenders and grill are on for the last trial fit! Excuse the tape, grill has to come out one more time for edge sealer and the high side A/C line. This is the first time the finished fenders and grill have been on so you could look at the stance.

Verry nice!

" I think I turned out great and I've had beer." The beer or the truck?

mknittle · 11-17-2012, 11:25 AM

Quote:

Originally Posted by rollenhard

Picked up this 1950 yellow Chevy truck today man its bright i think im going to paint the running boards black to break up the color.Its got the 1968 Chevy 230 with HEI distributor, 350 turbo trans, Camaro rear end.

I like it!

If it were mine all I would change is wheels and tires then lowerit a bit. and have fun!!

rollenhard · 11-17-2012, 11:44 AM

Thanks mknittle that's exactly what im going to do

Speedbumpauto · 11-17-2012, 12:37 PM

"The beer or the truck?" YES!

OrrieG · 11-19-2012, 02:20 PM

Worked, again, on the gas fill door, think I have it figured out just need a little break in the weather so I can roll the truck out and tack it in.

NEWFISHER · 11-19-2012, 03:38 PM

Sold/ Delivered the Apache Saturday, picked up the super cool engine for the Suburban on Sunday and have laid out a transformation plan starting the first week of December.

yossarian19 · 11-19-2012, 11:07 PM

Well, I finally found a sepentine belt that will fit over my Dorman power steering pulley. Bought the PS pump on Ebay, not realizing it didn't have a pulley on it. Bought the pulley on Rockauto, not realizing it was larger than stock and wouldn't take the stock belt.

So, after the holidays the motor gets plugs & a coolant temp sensor. If the parts I ordered every show up, I could bolt up the 4l60E & put the whole mess in the truck before New Years.

_Ogre · 11-20-2012, 06:33 PM

drove mine to bfeast
looks like cold weather is coming next week
i'll put it away for salt season

mknittle · 11-20-2012, 09:41 PM

I ground some of my welds smooth on my frame.

Russell Ashley · 11-23-2012, 02:41 PM

I finished shrinking my steering wheel and installed it today. Took a tip from Skymangs (sweet 16 build) and used an early 80's Ford ring. Got a new horn button and contacts so my horns work now too. The wheel looks white in the pic but it's the same light grey as the interior.

I got the wheel from Pull-A-Part for $12 and epoxy cost $20, so cost was $32 plus sandpaper and paint.

crossfire84 · 11-23-2012, 03:14 PM

Quote:

Originally Posted by Russell Ashley

I finished shrinking my steering wheel and installed it today. Took a tip from Skymangs (sweet 16 build) and used an early 80's Ford ring. Got a new horn button and contacts so my horns work now too. The wheel looks white in the pic but it's the same light grey as the interior.

I got the wheel from Pull-A-Part for $12 and epoxy cost $20, so cost was $32 plus sandpaper and paint.

nice work.

48 pickup · 11-23-2012, 03:36 PM

Looks sweet
Nice job
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

OrrieG · 11-23-2012, 03:42 PM

Finished fab and tacked in the gas fill door.

Divine 59 · 11-24-2012, 03:29 PM

Put my new fenton headers on. Painted the fentons and the stock intake with VHT Ceramic Aluminum paint. I hope it holds up, whenever I have it back on the road.

mknittle · 11-24-2012, 05:18 PM

i am glad to see more sixes being built

Daze57 · 11-24-2012, 10:17 PM

lookin v v nice

**Dan in Pasadena** · 11-25-2012, 02:10 AM

Quote:

Originally Posted by Russell Ashley

I finished shrinking my steering wheel and installed it today. Took a tip from Skymangs (sweet 16 build) and used an early 80's Ford ring. Got a new horn button and contacts so my horns work now too. The wheel looks white in the pic but it's the same light grey as the interior.

I got the wheel from Pull-A-Part for $12 and epoxy cost $20, so cost was $32 plus sandpaper and paint.

Took me awhile searching but found the steering wheel shrinkage thread thread, thanks!

Highsider · 11-25-2012, 11:02 AM

Steering wheel project:
http://67-72chevytrucks.com/vboard/s...=541904&page=5

On page 5, if it gets lost.

**arturo7** · 11-25-2012, 12:49 PM

Picked up a front disc brake kit from ABS in Orange, CA.

**Dan in Pasadena** · 11-25-2012, 07:45 PM

Quote:

Originally Posted by arturo7

Picked up a front disc brake kit from ABS in Orange, CA.

ABS? Can you provide more info on this local (to me/us) source?

1953chevyroc · 11-25-2012, 08:42 PM

Well, on the four day weekend I got the front fenders, bumper, radiator support and hood hinges off and took out the seat. Found an abandoned mouse nest and a dead mouse under the seat and cleaned up the interior with a vacuum.

mknittle · 11-25-2012, 09:06 PM

Quote:

Originally Posted by Russell Ashley

I finished shrinking my steering wheel and installed it today. Took a tip from Skymangs (sweet 16 build) and used an early 80's Ford ring. Got a new horn button and contacts so my horns work now too. The wheel looks white in the pic but it's the same light grey as the interior.

I got the wheel from Pull-A-Part for $12 and epoxy cost $20, so cost was $32 plus sandpaper and paint.

looks nice!

Amorget · 11-25-2012, 11:40 PM

Went to Pick-N-Pull and the wife and I pulled a set of Cadillac Catera seats for her truck. They say they are made by Recaro. Super comfy, classic looks to them for being modern bucket seats. She originally wanted bench seats until she saw these.

**arturo7** · 11-26-2012, 12:00 AM

Quote:

Originally Posted by Dan in Pasadena

ABS? Can you provide more info on this local (to me/us) source?

http://www.abspowerbrake.com/

They were highly recommended by a guy who has restored many vehicles.

11-16-2012, 06:05 PM	#1476
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: What Did You Do With Your Truck Today ? OrrieG cool with the grandkids ! theres your needed helping hands

11-17-2012, 11:44 AM	#1479
rollenhard Registered User Join Date: Sep 2007 Location: mission viejo ca Posts: 143	Re: What Did You Do With Your Truck Today ? Thanks mknittle that's exactly what im going to do __________________ Just Cruzin Through Life

11-17-2012, 12:37 PM	#1480
Speedbumpauto Registered User Join Date: Aug 2011 Location: Tucson, AZ Posts: 917	Re: What Did You Do With Your Truck Today ? "The beer or the truck?" YES!

11-19-2012, 02:20 PM	#1481
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: What Did You Do With Your Truck Today ? Worked, again, on the gas fill door, think I have it figured out just need a little break in the weather so I can roll the truck out and tack it in. __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

11-19-2012, 03:38 PM	#1482
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: What Did You Do With Your Truck Today ? Sold/ Delivered the Apache Saturday, picked up the super cool engine for the Suburban on Sunday and have laid out a transformation plan starting the first week of December.

11-19-2012, 11:07 PM	#1483
yossarian19 Registered User Join Date: Sep 2011 Location: Nevada City, CA Posts: 908	Re: What Did You Do With Your Truck Today ? Well, I finally found a sepentine belt that will fit over my Dorman power steering pulley. Bought the PS pump on Ebay, not realizing it didn't have a pulley on it. Bought the pulley on Rockauto, not realizing it was larger than stock and wouldn't take the stock belt. So, after the holidays the motor gets plugs & a coolant temp sensor. If the parts I ordered every show up, I could bolt up the 4l60E & put the whole mess in the truck before New Years.

11-20-2012, 06:33 PM	#1484
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,680	Re: What Did You Do With Your Truck Today ? drove mine to bfeast looks like cold weather is coming next week i'll put it away for salt season __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

11-20-2012, 09:41 PM	#1485
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: What Did You Do With Your Truck Today ? I ground some of my welds smooth on my frame. __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-23-2012, 02:41 PM	#1486
Russell Ashley Registered User Join Date: May 2010 Location: Lawrenceville, Ga Posts: 2,648	Re: What Did You Do With Your Truck Today ? I finished shrinking my steering wheel and installed it today. Took a tip from Skymangs (sweet 16 build) and used an early 80's Ford ring. Got a new horn button and contacts so my horns work now too. The wheel looks white in the pic but it's the same light grey as the interior. I got the wheel from Pull-A-Part for $12 and epoxy cost $20, so cost was $32 plus sandpaper and paint. Attached Images

11-23-2012, 03:36 PM	#1488
48 pickup Registered User Join Date: Nov 2012 Location: Devon UK Posts: 25	Re: What Did You Do With Your Truck Today ? Looks sweet Nice job Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device

11-23-2012, 03:42 PM	#1489
OrrieG Registered User Join Date: Jun 2006 Location: Idaho Posts: 8,800	Re: What Did You Do With Your Truck Today ? Finished fab and tacked in the gas fill door. Attached Images __________________ 1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project

11-24-2012, 03:29 PM	#1490
Divine 59 Registered User Join Date: Sep 2011 Location: Austin, TX Posts: 307	Re: What Did You Do With Your Truck Today ? Put my new fenton headers on. Painted the fentons and the stock intake with VHT Ceramic Aluminum paint. I hope it holds up, whenever I have it back on the road.

11-24-2012, 05:18 PM	#1491
mknittle Registered User Join Date: Jul 2011 Location: Auburn ca. Posts: 2,886	Re: What Did You Do With Your Truck Today ? i am glad to see more sixes being built __________________ Mark My GMC build. http://67-72chevytrucks.com/vboard/s...d.php?t=536602

11-24-2012, 10:17 PM	#1492
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: What Did You Do With Your Truck Today ? lookin v v nice

11-25-2012, 11:02 AM	#1494
Highsider Registered User Join Date: Jun 2012 Location: Southern Iowa Posts: 944	Re: What Did You Do With Your Truck Today ? Steering wheel project: http://67-72chevytrucks.com/vboard/s...=541904&page=5 On page 5, if it gets lost.



Register or Log In To remove these advertisements.

11-25-2012, 12:49 PM	#1495
arturo7 Senior Member Join Date: Jul 2012 Location: huntington beach Posts: 845	Re: What Did You Do With Your Truck Today ? Picked up a front disc brake kit from ABS in Orange, CA. __________________ ever forward build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=542073

11-25-2012, 08:42 PM	#1497
1953chevyroc Registered User Join Date: Oct 2011 Location: Hastings Nebraska Posts: 28	Re: What Did You Do With Your Truck Today ? Well, on the four day weekend I got the front fenders, bumper, radiator support and hood hinges off and took out the seat. Found an abandoned mouse nest and a dead mouse under the seat and cleaned up the interior with a vacuum.

11-25-2012, 11:40 PM	#1499
Amorget Registered User Join Date: Feb 2012 Location: Camano Island, WA Posts: 166	Re: What Did You Do With Your Truck Today ? Went to Pick-N-Pull and the wife and I pulled a set of Cadillac Catera seats for her truck. They say they are made by Recaro. Super comfy, classic looks to them for being modern bucket seats. She originally wanted bench seats until she saw these.

Register or Log In To remove these advertisements.