Daverods project 66 - Page 60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

watahyahknow · 02-19-2011, 11:40 AM

a little extra wood to hold it in its spot in the door openings should fix that , make sure theres an extra (heavy )person nearby ready to jump on the back of the engine hoist cause it will want to dip forward when you roll it under the chassis

Strodder · 02-19-2011, 11:42 AM

I don't see a problem with the cherry picker tipping if the arm is adjusted right.

*lakeroadster* · 02-19-2011, 12:20 PM

For a straight up dead lift no problem. Where the problem comes in is trying to roll the cab / hoist around with the hoist extended out that far.

I state this from my numerous experiences of moving my stepside bed around using my engine hoist, by myself.

If you have some people that can help it's always better to utilize them to stabilize the cab and help with positioning.

daverod · 02-19-2011, 01:01 PM

It did want to tip the first time I tried it. I had the hoist to far away from the truck after I moved it closer maybe 6" away I worked fine.

Did'nt damage anything. Now I need to pull my 350 trans put my torque convertor on reinstall and put my cab on the frame. Anything I need to know about putting the torque convertor on?

Fill it with dex3.

daverod · 02-19-2011, 01:06 PM

Quote:

Originally Posted by lakeroadster

For a straight up dead lift no problem. Where the problem comes in is trying to roll the cab / hoist around with the hoist extended out that far.

I state this from my numerous experiences of moving my stepside bed around using my engine hoist, by myself.

If you have some people that can help it's always better to utilize them to stabilize the cab and help with positioning.

I need to make some kinda rig for lifting my bed. The old lady always bit#hes a lot.

She's getting use to it though.

watahyahknow · 02-19-2011, 01:17 PM

make sure you can pass the tires with the crane before trying to put on the cab sumtimes the crane bumps the outside front tire , so you need to take it off and put that side on a jack

daverod · 02-19-2011, 01:31 PM

we'll do.

Strodder · 02-19-2011, 01:34 PM

Hey Dave what's with the small screen TV? I can hardly see it.

daverod · 02-19-2011, 01:36 PM

The big one is on the other side of the garage.

daverod · 02-19-2011, 01:45 PM

Strodder · 02-19-2011, 02:56 PM

Now that's a TV.

watahyahknow · 02-19-2011, 03:47 PM

daverod · 02-19-2011, 04:38 PM

It a 106" screen, and a projector. The sound system in that room (7.5 )will blow you over. The couches are wired to 150 watt. sub amps. so they shake. The women love it. oh ya, forgot one.

I might be addicted to TV.

watahyahknow · 02-19-2011, 04:51 PM

oh well 42 inch main flat screen TV , 24 inch computer monitor and a 17 inch laptop ....... guess Wat I'm looking at most of the time .... right the 17 inch laptop , cant beat 17 inch when its 10 inch from you're face for movie experience it covers the 150 inch wall behind it from my viewpoint
i think the future will be special goggles , kindah bleuray walkmans so you can see 3D without special glasses or high price 3D TV sets

daverod · 02-20-2011, 11:41 AM

got me alittle somthing for my mirror.

Strodder · 02-20-2011, 12:09 PM

That would make a kewl door logo.

daverod · 02-20-2011, 12:12 PM

I'm thinking it would be breaking some law or somthing?

Don't want to break any laws.

Strodder · 02-20-2011, 12:15 PM

Something like this would be good for me.

daverod · 02-20-2011, 12:17 PM

your so stupid.

Much better. I see some paint company already stole your name. Did find you at Kustom rides garage. Very kewl. New snow going sledding. later

watahyahknow · 02-21-2011, 05:48 PM

looks like its sitting on a s10 chassis

daverod · 02-21-2011, 06:03 PM

Its not, but that will be the plan. Looking at it wedsday. Has a title and rust?

Who I'm I kidin I'm gettin it.

First in line . No engine. 900. Want to pitch in?

watahyahknow · 02-21-2011, 06:09 PM

its been done before and the length is right for it , it is a little too narrow but longer a arms in the front and a different diff for the rear could fix that

daverod · 02-22-2011, 01:09 AM

Quote:

Originally Posted by watahyahknow

its been done before and the length is right for it , it is a little too narrow but longer a arms in the front and a different diff for the rear could fix that

95 s10 blazer for sale for 500 I wonder if that would work. No engine though.

watahyahknow · 02-22-2011, 06:05 AM

Quote:

Originally Posted by daverod

95 s10 blazer for sale for 500 I wonder if that would work. No engine though.

measure the wheel to wheel to see if it works i think the blazers are a little shorter , 500 for just the frame steering and suspension seems a bit steep (you dont use mush else ) a working engine included for that price or little more would be nice
on the other hand there S10 V8kits available

daverod · 02-22-2011, 11:11 AM

I think I 'll go with a engine that gets good gas milage.

That way I'll be able to drive it by the time I get it done.

02-19-2011, 11:40 AM	#1
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 a little extra wood to hold it in its spot in the door openings should fix that , make sure theres an extra (heavy )person nearby ready to jump on the back of the engine hoist cause it will want to dip forward when you roll it under the chassis __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-19-2011, 11:42 AM	#2
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 I don't see a problem with the cherry picker tipping if the arm is adjusted right. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

02-19-2011, 12:20 PM	#3
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: Daverods project 66 For a straight up dead lift no problem. Where the problem comes in is trying to roll the cab / hoist around with the hoist extended out that far. I state this from my numerous experiences of moving my stepside bed around using my engine hoist, by myself. If you have some people that can help it's always better to utilize them to stabilize the cab and help with positioning. Last edited by lakeroadster; 02-19-2011 at 12:31 PM.

02-19-2011, 01:01 PM	#4
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 It did want to tip the first time I tried it. I had the hoist to far away from the truck after I moved it closer maybe 6" away I worked fine. Did'nt damage anything. Now I need to pull my 350 trans put my torque convertor on reinstall and put my cab on the frame. Anything I need to know about putting the torque convertor on? Fill it with dex3. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-19-2011 at 01:01 PM.

02-19-2011, 01:17 PM	#6
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 make sure you can pass the tires with the crane before trying to put on the cab sumtimes the crane bumps the outside front tire , so you need to take it off and put that side on a jack __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-19-2011, 01:31 PM	#7
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 we'll do. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

02-19-2011, 01:34 PM	#8
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Hey Dave what's with the small screen TV? I can hardly see it. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

02-19-2011, 01:36 PM	#9
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 The big one is on the other side of the garage. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-19-2011 at 01:47 PM.

02-19-2011, 01:45 PM	#10
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

02-19-2011, 02:56 PM	#11
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Now that's a TV. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

02-19-2011, 03:47 PM	#12
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-19-2011, 04:38 PM	#13
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 It a 106" screen, and a projector. The sound system in that room (7.5 )will blow you over. The couches are wired to 150 watt. sub amps. so they shake. The women love it. oh ya, forgot one. I might be addicted to TV. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-19-2011 at 04:45 PM.

02-19-2011, 04:51 PM	#14
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 oh well 42 inch main flat screen TV , 24 inch computer monitor and a 17 inch laptop ....... guess Wat I'm looking at most of the time .... right the 17 inch laptop , cant beat 17 inch when its 10 inch from you're face for movie experience it covers the 150 inch wall behind it from my viewpoint i think the future will be special goggles , kindah bleuray walkmans so you can see 3D without special glasses or high price 3D TV sets __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-20-2011, 11:41 AM	#15
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 got me alittle somthing for my mirror. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-20-2011 at 11:42 AM.

02-20-2011, 12:09 PM	#16
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 That would make a kewl door logo. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*



Register or Log In To remove these advertisements.

02-20-2011, 12:12 PM	#17
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I'm thinking it would be breaking some law or somthing? Don't want to break any laws. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

02-20-2011, 12:15 PM	#18
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Something like this would be good for me. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 02-20-2011 at 12:21 PM.

02-20-2011, 12:17 PM	#19
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 your so stupid.Much better. I see some paint company already stole your name. Did find you at Kustom rides garage. Very kewl. New snow going sledding. later __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-20-2011 at 12:24 PM.

02-21-2011, 05:48 PM	#20
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 looks like its sitting on a s10 chassis __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-21-2011, 06:03 PM	#21
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Its not, but that will be the plan. Looking at it wedsday. Has a title and rust? Who I'm I kidin I'm gettin it. First in line . No engine. 900. Want to pitch in? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 02-21-2011 at 06:05 PM.

02-21-2011, 06:09 PM	#22
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: Daverods project 66 its been done before and the length is right for it , it is a little too narrow but longer a arms in the front and a different diff for the rear could fix that __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts

02-22-2011, 11:11 AM	#25
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I think I 'll go with a engine that gets good gas milage. That way I'll be able to drive it by the time I get it done. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

Register or Log In To remove these advertisements.