How about some pics of 88-98 Trucks

[jb1016]

I like the low-profile cowl hood!
Posted via Mobile Device

[bigred94]

Thanks Scott i thought they turned out well. and jb thats the max legal hieght for the hood in va. Im looking for sum advice for the rear bumper. I bought the truck with a fleetside bed so i dont have the bumper for the stepside i was told you can cut a fleetside to fit the stepside but do i go back with a standard bumper or aftermarket or a rollpan?

[loudnlifted88]

Originally Posted by bigred94

Heres my 94' chevy.

that what i want my shortbox stepside to look like someday how much lift is on that and what size tires

[scotts62]

Originally Posted by bigred94

Thanks Scott i thought they turned out well. and jb thats the max legal hieght for the hood in va. Im looking for sum advice for the rear bumper. I bought the truck with a fleetside bed so i dont have the bumper for the stepside i was told you can cut a fleetside to fit the stepside but do i go back with a standard bumper or aftermarket or a rollpan?

Depends what kind of bumper.. the steel bundy bumpers all you have to do is cut the inside a bit and it will bolt right up now the factory ones with the trim will bolt up fine.

[bigred94]

Loud-its a 6in lift with 315/75/16 bfgoodrich at's which was bought out by michelin they measure out to 34.5-35 tall. scott-yea the middle under the tailgate was what i was told had to be trimed out to use fleetside bumper but mine has a big hole in it so i was going to make a fleetside would fit and just buy one and cut it i havent had any luck what so ever at finding a stepside bumper around here.

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[Sicklajoie]

My old 98 C2500

[david068513]

got it last night

4.3 auto with 84k miles

[scotts62]

Pretty slick truck you have there

[david068513]

Originally Posted by scotts62

Pretty slick truck you have there

thanks, the truck is very nice for the age and low miles. Traded a nice low mile camaro for it. I will be daily driving the truck and liking it since I got it last night

[cris well]

what size are those tires David?

they look like 265-75s or 31-10.50s.

i have the same wheels on my GMC that i want some bigger tires on.

[nuclearmeltdown2046]

I've been all over this forum for resources and it dawned on me I have never posted . Shame on me ...... Well here she is dirty and all (Portland rain)...
1994 GMC Sierra 1500 5.7 ( I hope this works )





She's been good to me but lately she's been needn some loven. But that's for another thread .

..............................................., peace Brian

[scotts62]

Cool truck! 5-7 drop?

Oh and from OKC!

[david068513]

Originally Posted by cris well

what size are those tires David?

they look like 265-75s or 31-10.50s.

i have the same wheels on my GMC that i want some bigger tires on.

they are 31 10.50's.

[nuclearmeltdown2046]

Thanks ..... to be honest i think its more 3 - 5 but i'm not sure (honestly) . I just received it from my son . He's moved to other things so I took the truck off his hands . It will be a fun project for me. I still have ALOT to learn. That's why I'm here . Learn learn, did I forget to say Learn (LOL). I hope you are all ready for a rookie .

Thanks for the welcome. This forum has a fantastic community and a wealth of knowledge. I can't wait to be apart of it .
..............................., peace Brian

[86 Rado]

Here is a 90 shortbed I bought late last year. It had no rust I could find so it made for an easy paint job. I added the hood scoop and two tone around the bottom trimmed off with red stripe and did the tailgate, I had to replace the gate and it was from a GMC with the aluminum strip. I removed it and decided to make my own design for it. It runs very good and has a 350.

[86 Rado]

Heres the pics.

[jakeblues652]

1988 chev silverado 2500. tbi 350. yeah, shes ugly, i know. bought it last spring, sold it last spring, for 500 more than we bought it for. it just didnt like to go. almost no brakes. would backfire from the carb if you put it to the floor. leaky exhaust. tires were almost gone. plow was run without a blade, and needed a new spring and all new spring mounts. i think the oly good thing about the truck was the plow blade we put on it, and the restore we poured in the oil fill!

oh, and i almost forgot. i tryed to take the tires off one day...yeah, that didnt happen. it couldnt even spin the tires in gravel. old old, worn out 350. it was a 5th wheel before we got it.

[89muscletruck]

On the walk to University this week I come across this poor girl stuck in the snow. Kinda looked like it had tried to become one with the snow...
I should say that we don't normal get this much snow, this is easily the biggest snowfall that I can remember in the last 12 to 15 years.

[89muscletruck]

luckily my truck was nice and warm in its "carport"

[Mr79C10]

Originally Posted by 89muscletruck

On the walk to University this week I come across this poor girl stuck in the snow. Kinda looked like it had tried to become one with the snow...
I should say that we don't normal get this much snow, this is easily the biggest snowfall that I can remember in the last 12 to 15 years.

And that my friends,,,, Is why I HAVE a Florida zip code

[scotts62]

ya thats a lot of snow

[1badgmc]

Just thought I'd share the results of one of today's projects...

[scotts62]

Cool, looks good!

[Mr79C10]

Originally Posted by 1badgmc

Just thought I'd share the results of one of today's projects...

Looks great, Fill us in on how ya did it.

[1badgmc]

Originally Posted by Mr79C10

Looks great, Fill us in on how ya did it.

I pulled out the cluster...




Took it apart...




And replaced the bulbs with the blue WLED-xHP5 LEDs from Super Bright LEDs...