What did you do to your truck today? - Page 60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Bad62Pro/Street · 06-26-2010, 03:50 PM

(((( 1Bad62Pro/Street ))))
One Bad Mamma Jamma
Project: "Full Metal Yellow Jacket"
Breathing life back in my Ole' 62 after it has sat for 4 Years......
Have not rebuit the carb yet!!!
Still out of tune!
1962 CHEVY C10 1/2 TON STEPSIDE NOSTALGIA PRO/STREET
PROJECT: "FULL METAL YELLOW JACKET"
UNDER CONSTRUCTION
http://67-72chevytrucks.com/vboard/s...d.php?t=321173

YouTube- (((( 1Bad62Pro/Street )))) - One Bad...

62 Bowtie · 06-26-2010, 08:02 PM

Sweet, sounds good. Back in the saddle again

ranger374 · 06-26-2010, 08:56 PM

Got my entire cab blasted today from to to bottom inside out and under

heymoe · 06-26-2010, 09:54 PM

Lets see, I finished half of my 2 1/2" polished stainless exhaust and mounted my cab. Let me know what you think.

**scotts62** · 06-26-2010, 09:55 PM

Looks awesome!!!

heymoe · 06-26-2010, 10:07 PM

Quote:

Originally Posted by scotts62

Looks awesome!!!

Thanks Scott!

ravens65 · 06-27-2010, 11:33 AM

Thats gonna be one bad s.o.b.

heymoe · 06-27-2010, 12:32 PM

Quote:

Originally Posted by ERIC BUFFARD

Thats gonna be one bad s.o.b.

Thanks Eric.

Sillyoldman · 06-28-2010, 12:00 AM

I got the new polished alum oil pan on. I had to wait on finishing the exhaust pipes until the bed was back on. It is and I finished the pypes today. My neighbor came over carrying a exhaust hanger. She said it was in the middle of the road. I suppose I forgot one sitting on the frame since none were missing. I drilled the final holes and bolted the bed on. I was way too tired for much else so I did some simple things like painting and priming. I sneaked out for another outlaw run around the block. This time I went real easy on the pedal. Some of the neighbors hear me and come outside to make sure I'm in check. I cant wait to put the foot down and get through the gears. When the truck is legal I will drive it enough to get a feel for it and then gradually push distance and speed

YouTube- 1963 chevy truck

Sorry about the audio, no windshield yet.

YouTube- Picture 105.avi

ravens65 · 06-28-2010, 12:13 PM

we went for a shake down run today, I took my youngest son and it was fun. the truck is to loud for him! we went a little over 20 mi. and all was well. except the gas- we had none! Eric

markeb01 · 06-28-2010, 12:46 PM

Quote:

Originally Posted by Sillyoldman

I got the new polished alum oil pan on. I had to wait on finishing the exhaust pipes until the bed was back on. It is and I finished the pypes today. My neighbor came over carrying a exhaust hanger. She said it was in the middle of the road. I suppose I forgot one sitting on the frame since none were missing. I drilled the final holes and bolted the bed on. I was way too tired for much else so I did some simple things like painting and priming. I sneaked out for another outlaw run around the block. This time I went real easy on the pedal. Some of the neighbors hear me and come outside to make sure I'm in check. I cant wait to put the foot down and get through the gears. When the truck is legal I will drive it enough to get a feel for it and then gradually push distance and speed Sorry about the audio, no windshield yet.

Thanks for sharing. What are you using for a camera mount in the first video?

markeb01 · 06-28-2010, 12:48 PM

Quote:

Originally Posted by ravens65

we went for a shake down run today, I took my youngest son and it was fun. the truck is to loud for him! we went a little over 20 mi. and all was well. except the gas- we had none! Eric

Yep, overlooking those "little details" can make your day interesting!

64c20crewcab · 06-28-2010, 01:15 PM

Quote:

Originally Posted by heymoe

Lets see, I finished half of my 2 1/2" polished stainless exhaust and mounted my cab. Let me know what you think.

Looks great!!

64c20crewcab · 06-28-2010, 01:21 PM

This past weekend was spent cleanin up threads n bolting on the hv oil pump, pan, e-brock intake & dist. Using all ARP 12pt stainless hardware. Should be able to drop motor back into frame rail this coming weekend! Need to work on a busted stud in the passenger side ramhorn.

ravens65 · 06-28-2010, 04:09 PM

Quote:

Originally Posted by markeb01

Yep, overlooking those "little details" can make your day interesting!

Yea, We gassed it up and went 56 mi. this time. we got 4 thumbs up, 50-2nd looks, 10 gaulkers and put to shame one froggy rust-tang! don't let this old man in a old truck make you look bad punk hahahaha! we came around a corner and he had that look in his eye, so..... I down shifted to second gear and next thing I know was he is a little speck in my mirror. even the girls at the gas station were asking about the motor. I'm still not running a hood- can't seem to find a nice one!!!! anyone want to donate one? here is a picture of what the mustang saw.

64GMCHorsepower · 06-28-2010, 05:40 PM

Well, I installed a new power steering reservoir, installed a new speedometer, cable, and gear assembly in the tranny for it, installed new adjusting sleeves on the front tie-rods and aligned the front end......also installed the temp control for my cooling fan.......installed new lowering shocks for the front LCA's......

been a busy weekend.....

Sillyoldman · 06-28-2010, 08:23 PM

Quote:

Originally Posted by markeb01

Thanks for sharing. What are you using for a camera mount in the first video?

Blue painters tape

Thanks Don

markeb01 · 06-28-2010, 08:40 PM

Cool, and thanks. Sometimes the simplest approach...

1Bad62Pro/Street · 06-28-2010, 09:51 PM

Carb has been rebuilt.
Engine is tuned.
Will post videos tomorrow of the homemade exhaust at idle.
Sounds like a big block.......

1Bad62Pro/Street · 06-29-2010, 11:06 AM

YouTube- 1962 CHEVY C10 1/2 TON STEPSIDE...

YouTube- 1962 CHEVY C10 1/2 TON STEPSIDE...

ravens65 · 06-29-2010, 01:59 PM

Quote:

Originally Posted by 1Bad62Pro/Street

Carb has been rebuilt.
Engine is tuned.
Will post videos tomorrow of the homemade exhaust at idle.
Sounds like a big block.......

So..... I'm not the only guy the threw away his inner fenders? Eric - ravens65

**scotts62** · 06-29-2010, 02:21 PM

Holy crap the other tail pipe sounds the exact same!

JK man sounds good for hearing it from computer speakers

onequickchevy · 06-29-2010, 02:36 PM

Man, sounds great. Can't wait to see a vid of that thing lighting em up. Might get a little loud

ravens65 · 06-29-2010, 04:01 PM

What did I do today? after washing the truck, I ran it against a '04 C-5 corvette. He was shocked and so was I . I thought that i'd beat him, but... It was all the raven had. I tuned it be ear ( timing & fuel/air mixture ) so maybe some dyno tuning would help, if I ever have the extra money. we both stopped up the road later and laughed about it . he said it was very loud he couldn't here his own car as we were side by side. very cool after 5 years of work. its un-real for a 45 year old truck, handles very nice too!!!

**scotts62** · 06-29-2010, 04:15 PM

heck yeah thats awesome! I like your truck a lot, what seats are those?

06-26-2010, 08:02 PM	#1477
62 Bowtie Registered User Join Date: Nov 2008 Location: Elk Grove Ca Posts: 629	Re: What did you do to your truck today? Sweet, sounds good. Back in the saddle again

06-26-2010, 08:56 PM	#1478
ranger374 Registered User Join Date: Jun 2010 Location: Georgia Posts: 30	Re: What did you do to your truck today? Got my entire cab blasted today from to to bottom inside out and under __________________ My Build thread http://www.67-72chevytrucks.com/vboa...d.php?t=408574

06-26-2010, 09:54 PM	#1479
heymoe Registered User Join Date: Mar 2009 Location: Lebanon, Ohio Posts: 324	Re: What did you do to your truck today? Lets see, I finished half of my 2 1/2" polished stainless exhaust and mounted my cab. Let me know what you think. Attached Images

06-26-2010, 09:55 PM	#1480
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: What did you do to your truck today? Looks awesome!!! __________________ Scott 93 crew cab build Project 62

06-27-2010, 11:33 AM	#1482
ravens65 Registered User Join Date: Dec 2009 Location: clermont florida Posts: 176	Re: What did you do to your truck today? Thats gonna be one bad s.o.b. __________________ If it has tits or wheels its gonna give you problems!!!

06-28-2010, 12:13 PM	#1485
ravens65 Registered User Join Date: Dec 2009 Location: clermont florida Posts: 176	Re: What did you do to your truck today? we went for a shake down run today, I took my youngest son and it was fun. the truck is to loud for him! we went a little over 20 mi. and all was well. except the gas- we had none! Eric __________________ If it has tits or wheels its gonna give you problems!!!

06-28-2010, 01:21 PM	#1489
64c20crewcab Registered User Join Date: Jun 2008 Location: North SD County Posts: 631	Re: What did you do to your truck today? This past weekend was spent cleanin up threads n bolting on the hv oil pump, pan, e-brock intake & dist. Using all ARP 12pt stainless hardware. Should be able to drop motor back into frame rail this coming weekend! Need to work on a busted stud in the passenger side ramhorn. __________________ ..............................._________ ......___________//___[[___{\ _____ ...../__(_(O)_)___/____/____/_(O)_/ 1964 C20 Long Stepside 3 Door Crew Cab - Armbruster-Stageway Conversion Y2K INDN Chief "ONE OF A KIND, NOT ONE OF THE CROWD" Aug 2010 - Front end frame cleanup & engine swap done!!! June 2011 - Rear end bagged Sept 2011 - Rebuild motor top end Sept 2012 - Parked and slowly working on it. Aug 2013 - Front end bagged - finally! Aug 2014 - Stepside swap conversion done. Finally ready to start bodywork! Have a few KEWL ideas... Here is my build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=335427

06-28-2010, 05:40 PM	#1491
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: What did you do to your truck today? Well, I installed a new power steering reservoir, installed a new speedometer, cable, and gear assembly in the tranny for it, installed new adjusting sleeves on the front tie-rods and aligned the front end......also installed the temp control for my cooling fan.......installed new lowering shocks for the front LCA's...... been a busy weekend..... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

06-28-2010, 08:40 PM	#1493
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: What did you do to your truck today? Cool, and thanks. Sometimes the simplest approach... __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

06-28-2010, 09:51 PM	#1494
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: What did you do to your truck today? Carb has been rebuilt. Engine is tuned. Will post videos tomorrow of the homemade exhaust at idle. Sounds like a big block....... __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 06-29-2010 at 11:06 AM.

06-29-2010, 02:21 PM	#1497
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: What did you do to your truck today? Holy crap the other tail pipe sounds the exact same! JK man sounds good for hearing it from computer speakers __________________ Scott 93 crew cab build Project 62

06-29-2010, 02:36 PM	#1498
onequickchevy Registered User Join Date: Sep 2009 Location: Marianna, Florida Posts: 339	Re: What did you do to your truck today? Man, sounds great. Can't wait to see a vid of that thing lighting em up. Might get a little loud __________________ Slowly but surely getting it done.

06-29-2010, 04:01 PM	#1499
ravens65 Registered User Join Date: Dec 2009 Location: clermont florida Posts: 176	Re: What did you do to your truck today? What did I do today? after washing the truck, I ran it against a '04 C-5 corvette. He was shocked and so was I . I thought that i'd beat him, but... It was all the raven had. I tuned it be ear ( timing & fuel/air mixture ) so maybe some dyno tuning would help, if I ever have the extra money. we both stopped up the road later and laughed about it . he said it was very loud he couldn't here his own car as we were side by side. very cool after 5 years of work. its un-real for a 45 year old truck, handles very nice too!!! Attached Images __________________ If it has tits or wheels its gonna give you problems!!!

06-29-2010, 04:15 PM	#1500
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,243	Re: What did you do to your truck today? heck yeah thats awesome! I like your truck a lot, what seats are those? __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.