1968 - Page 62 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gdavis · 01-31-2014, 09:46 PM

Quote:

Originally Posted by cubber

I like my 3.08 with a TH350. It does ok on the highway, but overdrive would help. Plenty stout off the line, too.

for now I will use my th400. I will see if the 3.08 is better on gas. But I will get a 700r4 later. I like it for the over drive.

gdavis · 02-01-2014, 09:16 PM

I am looking at a set of bed strips. I hope we can come up with a price. I go and pick up my hood Tuesday. Maybe tuesday on the bed strips also.

gdavis · 02-02-2014, 07:44 PM

well I made a deal for the bed strips. I will pick them up Thursday

gdavis · 02-03-2014, 07:46 PM

The big brown truck came by today. Got a few parts. Still waiting on my big order. I did fill the motor with break in oil. Now I am waiting for the other parts so I can crank the enging. (Wiring harness.)
dimmer switch
dimmer switch pig tail
turn signal switch
head light switch benzel
head light switch backing nut
safety switch
wiring instructions 69 thru 72

gdavis · 02-04-2014, 08:13 PM

nothing today

cubber · 02-05-2014, 12:59 PM

Always good to get a visit from the brown truck! Can't wait to hear that engine purr.

gdavis · 02-05-2014, 07:58 PM

yea it was. I will be going to St. Augustine and Gainesville ,Fl. to get some parts that I need to pick up. to big to ship.
A hood and bed strips and rear fender supports. It will take me all day to do this, but meeting other board members is also a plus

gdavis · 02-07-2014, 10:27 AM

I got the hood and bed strips. It was a good drive over to the west coast of Florida. I can't say that it was a good drive back. For it rained all the way home. But I did get to meet two great guys. D. passmore and ZUKowner. I got to see how far along they are with their rides. passmore is very knowledgeable about stuff I took for granted. He is a very nice guy to deal with. and zukowner well he is doing a jam up job on his two tone truck (black and silver). We talked seem like for a hour but only a few minutes. These two guys are top of the line guys. They are down to the earth types of guys. So if anyone has a dealing with these guys well rest a sure you will come out on top. George

Pictures of hood and bed strips

The bed strips are for a short fleet but they will fit a stepside bed. They are new never been used. I am planning on getting them chromed.

Xeen · 02-09-2014, 04:11 AM

Hey George
Is the hood nice, how bout a pic?

gdavis · 02-09-2014, 10:21 AM

Quote:

Originally Posted by Xeen

Hey George
Is the hood nice, how bout a pic?

Forgot to post pictures the other day so I did and now you can see them. It only has surface rust and the center ridge is stright with no defects except for a small dent on the drivers side of the hood.

gdavis · 02-10-2014, 08:31 PM

I got around to getting my sand blasting sand today. It's going to rain tomorrow and Wednesday so I want get to sand blast the hood. So I guess I will catch up on some of my honey do list. Got to pour some concrete for a side walk to the shop. and the the Mother-In-Law cottage. and install some sideing on the shop. By then I will be able to start working on the truck again.
I did find the part to the transmission shifter, it bolts to the transmission. I got it from a fellow board member. (new part)
I sent off my steering column a few weeks ago and he called me and said it was done. He only charged me 40.00 labor plus parts. What a deal.

**WIDESIDE72** · 02-11-2014, 01:56 PM

Did I see that you were looking for the very rearmost stepside bed crossmember with the large slotted holes that bolts to the frame? I parted a truck k and have one if you need it.

gdavis · 02-11-2014, 09:38 PM

Quote:

Originally Posted by WIDESIDE72

Did I see that you were looking for the very rearmost stepside bed crossmember with the large slotted holes that bolts to the frame? I parted a truck k and have one if you need it.

I sent you question on the rear bed sill VIA PM

**Elliot949** · 02-11-2014, 10:17 PM

Quote:

Originally Posted by gdavis

Hey Brain thanks glad to hear from you. I called several times and no answer. Thought you left the board. If that is the case I already have a th400 in the truck. I have heard some people say the 700r4 is better with over drive and some say th400 is better. I think I will try the 3.08 with the th400 for a while to see.

Hey George... I am curious on this also... What motor are you running... I have a 327 with a 400... I am still trying to decide what gear to run and also considering a 700r4...

Let me know... Dan

**WIDESIDE72** · 02-12-2014, 12:59 AM

I am running a 355/700r4/3.73. Just right, imo.

**CUSTOM/10** · 02-12-2014, 08:19 AM

Hey George !

Just looked through your build thread. Wow, you've got some great fabrication skills ! You can tell this project is a labor of love. Looking good !

I've got your sun visors all boxed up and ready to go for you !

Gary
CUSTOM/10

**Elliot949** · 02-12-2014, 08:45 AM

Quote:

Originally Posted by WIDESIDE72

I am running a 355/700r4/3.73. Just right, imo.

I know this probably isn't a main concern but what kind of fuel economy are you dropping down with this combination...

My 327/400 combo was running 456 gears and was only dropping down 6-7 mpg... I really would like to see 13-14... so my thoughts were to run a 700r4 with some 330ish gears....

Thanks For you opinion... Dan

gdavis · 02-12-2014, 09:50 PM

Quote:

Originally Posted by Elliot949

Hey George... I am curious on this also... What motor are you running... I have a 327 with a 400... I am still trying to decide what gear to run and also considering a 700r4...

Let me know... Dan

I will be running a Small block 383 and a th400 with 3.08 rear end. I am going to see if I really need a 700r4 transmission
as far as the fuel I don't know a friend get 18 on the hiway. I am hopeing the same.

gdavis · 02-12-2014, 09:51 PM

Quote:

Originally Posted by CUSTOM/10

Hey George !

Just looked through your build thread. Wow, you've got some great fabrication skills ! You can tell this project is a labor of love. Looking good !

I've got your sun visors all boxed up and ready to go for you !

Gary
CUSTOM/10

thanks guy. I hope to send it out tomorrow. I will let you know.

gdavis · 02-12-2014, 09:53 PM

Quote:

Originally Posted by WIDESIDE72

I am running a 355/700r4/3.73. Just right, imo.

I really don't know what dirrection I will be going. For now I will keep the th400. The engine is a 383 small block with 3.08 rear.

gdavis · 02-12-2014, 10:02 PM

Well, today I got down to business and ordered a lot of small parts from
Classis Parts of America. total 32 items. There was two items that I ordered the shipping cost more than the item. Bed angle strips cost 29.95 a pair and shipping was 27.95 and angle strip covers cost 24.95 a pair and shipping cost 27.95.
I paid more shipping cost on these two items than the rest of the stuff combined. But now I have almost everything I need to put the baby to bed. I said almost. I sure there will be items I over looked.

**Elliot949** · 02-13-2014, 07:20 AM

Quote:

Originally Posted by gdavis

Well, today I got down to business and ordered a lot of small parts from
Classis Parts of America. total 32 items. There was two items that I ordered the shipping cost more than the item. Bed angle strips cost 29.95 a pair and shipping was 27.95 and angle strip covers cost 24.95 a pair and shipping cost 27.95.
I paid more shipping cost on these two items than the rest of the stuff combined. But now I have almost everything I need to put the baby to bed. I said almost. I sure there will be items I over looked.

LOL... There is always something else... LOL.. I am diggin the heck out of your truck...

gdavis · 02-13-2014, 07:49 PM

Quote:

Originally Posted by Elliot949

LOL... There is always something else... LOL.. I am diggin the heck out of your truck...

thanks a lot. I will be glad when it is spring so I can get to work on the old girl. today it rained and cold high was only 55

**Elliot949** · 02-13-2014, 10:05 PM

Quote:

Originally Posted by gdavis

thanks a lot. I will be glad when it is spring so I can get to wook on the old girl. today it rained and cold high was only 55

Goerge ... now that is funny... LOL... it is only 55... LOL... man that is a heat wave... we have been in the single digits with wind chills up to -30... today it got to 46... Man I almost went swimming... LOL...

bpotter05 · 02-14-2014, 02:35 AM

^^ agree with that!

02-01-2014, 09:16 PM	#1527
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 I am looking at a set of bed strips. I hope we can come up with a price. I go and pick up my hood Tuesday. Maybe tuesday on the bed strips also. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

02-02-2014, 07:44 PM	#1528
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 well I made a deal for the bed strips. I will pick them up Thursday __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper Last edited by gdavis; 02-04-2014 at 08:11 PM.

02-03-2014, 07:46 PM	#1529
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 The big brown truck came by today. Got a few parts. Still waiting on my big order. I did fill the motor with break in oil. Now I am waiting for the other parts so I can crank the enging. (Wiring harness.) dimmer switch dimmer switch pig tail turn signal switch head light switch benzel head light switch backing nut safety switch wiring instructions 69 thru 72 __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper Last edited by gdavis; 02-04-2014 at 08:11 PM.

02-04-2014, 08:13 PM	#1530
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 nothing today __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

02-05-2014, 12:59 PM	#1531
cubber Registered User Join Date: Mar 2012 Location: Leanna, TN Posts: 2,061	Re: 1968 Always good to get a visit from the brown truck! Can't wait to hear that engine purr. __________________ =MATTHEW 69 Stepper...Stroked & Bagged GONE BUT NOT FORGOTTEN 2003 Chevrolet Z71 Ext. Cab 1995 Cavalier gas saver!

02-05-2014, 07:58 PM	#1532
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 yea it was. I will be going to St. Augustine and Gainesville ,Fl. to get some parts that I need to pick up. to big to ship. A hood and bed strips and rear fender supports. It will take me all day to do this, but meeting other board members is also a plus __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper Last edited by gdavis; 02-07-2014 at 10:15 AM.

02-07-2014, 10:27 AM	#1533
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 I got the hood and bed strips. It was a good drive over to the west coast of Florida. I can't say that it was a good drive back. For it rained all the way home. But I did get to meet two great guys. D. passmore and ZUKowner. I got to see how far along they are with their rides. passmore is very knowledgeable about stuff I took for granted. He is a very nice guy to deal with. and zukowner well he is doing a jam up job on his two tone truck (black and silver). We talked seem like for a hour but only a few minutes. These two guys are top of the line guys. They are down to the earth types of guys. So if anyone has a dealing with these guys well rest a sure you will come out on top. George Pictures of hood and bed strips The bed strips are for a short fleet but they will fit a stepside bed. They are new never been used. I am planning on getting them chromed. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper Last edited by gdavis; 02-09-2014 at 10:18 AM.

02-09-2014, 04:11 AM	#1534
Xeen Registered User Join Date: Aug 2012 Location: Topeka Kansas Posts: 2,655	Re: 1968 Hey George Is the hood nice, how bout a pic? __________________ Please call me Brian. Check out My 1972 SWB Fleetside 5.3L Vortec Restomod Build

02-10-2014, 08:31 PM	#1536
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 I got around to getting my sand blasting sand today. It's going to rain tomorrow and Wednesday so I want get to sand blast the hood. So I guess I will catch up on some of my honey do list. Got to pour some concrete for a side walk to the shop. and the the Mother-In-Law cottage. and install some sideing on the shop. By then I will be able to start working on the truck again. I did find the part to the transmission shifter, it bolts to the transmission. I got it from a fellow board member. (new part) I sent off my steering column a few weeks ago and he called me and said it was done. He only charged me 40.00 labor plus parts. What a deal. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

02-11-2014, 01:56 PM	#1537
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1968 Did I see that you were looking for the very rearmost stepside bed crossmember with the large slotted holes that bolts to the frame? I parted a truck k and have one if you need it.

02-12-2014, 12:59 AM	#1540
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 1968 I am running a 355/700r4/3.73. Just right, imo.

02-12-2014, 08:19 AM	#1541
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,838	Re: 1968 Hey George ! Just looked through your build thread. Wow, you've got some great fabrication skills ! You can tell this project is a labor of love. Looking good ! I've got your sun visors all boxed up and ready to go for you ! Gary CUSTOM/10 __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-12-2014, 10:02 PM	#1546
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: 1968 Well, today I got down to business and ordered a lot of small parts from Classis Parts of America. total 32 items. There was two items that I ordered the shipping cost more than the item. Bed angle strips cost 29.95 a pair and shipping was 27.95 and angle strip covers cost 24.95 a pair and shipping cost 27.95. I paid more shipping cost on these two items than the rest of the stuff combined. But now I have almost everything I need to put the baby to bed. I said almost. I sure there will be items I over looked. __________________ Check out Patches Cars I owned in the past. 1962 chev II Nova - 1965 Chevelle SS - (2)1966 Chevelle SS 1965 chev C10 57 belair chev 1967 Chevelle SS - 1969 Chevelle SS - 1972 Chevelle SS 1967 Buick electra 225 1995 Harley Davidson bager What does not kill you will make you stronger 1968 c10 short wheel base stepper

02-14-2014, 02:35 AM	#1550
bpotter05 Registered User Join Date: Nov 2012 Location: Wichita, KS Posts: 32	Re: 1968 ^^ agree with that!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.