Patina, shop logo'd, rusty trucks? - Page 63 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Justin36 · 11-19-2012, 10:52 PM

Quote:

Originally Posted by barnold

I'll throw mine in here
Posted via Mobile Device
Posted via Mobile Device

Love it!
Posted via Mobile Device

Bullittben · 11-19-2012, 11:54 PM

Here's mine. Given to me by the original owner along with tons of paperwork including the original owners manual in the sleeve and the warranty manual and protect-o-plate. 71k miles, never wrecked just a little rusty! Just installed a Muncie M20 behind the factory 250 inline 6. Odd combo but I hate column shift!

Posted via Mobile Device
Posted via Mobile Device

Justin36 · 11-20-2012, 12:01 AM

Quote:

Originally Posted by Bullittben

Here's mine. Given to me by the original owner along with tons of paperwork including the original owners manual in the sleeve and the warranty manual and protect-o-plate. 71k miles, never wrecked just a little rusty! Just installed a Muncie M20 behind the factory 250 inline 6. Odd combo but I hate column shift!

Posted via Mobile Device
Posted via Mobile Device

Welcome to the board! Awesome truck!
Posted via Mobile Device

gringoloco · 11-20-2012, 12:46 AM

Cool truck, bullitt. A CLR bath would work wonders- bet there's still a lot of factory paint/primer hiding in all that surface rust
Posted via Mobile Device

Street Smart · 11-20-2012, 07:22 AM

Some good looking trucks

brn agn · 11-20-2012, 08:01 AM

Quote:

Originally Posted by barnold

I'll throw mine in here
Posted via Mobile Device
Posted via Mobile Device

Quote:

Originally Posted by ultrahd4me

Very nice. Here is some of my old junk.

Nice Trucks! Have either of you considered joining us on Power Tour next summer?

http://67-72chevytrucks.com/vboard/s...d.php?t=531616

SLOW POKE · 11-20-2012, 09:08 AM

ultrahd4me what are the suspension setups for your trucks?

ultrahd4me · 11-20-2012, 09:50 AM

The white truck has 4" lowering springs from Wesern Chassis in the front, and a lowering hanger and 4 leafs removed in the rear. New shocks all around. I'm really suprised on how good the ride is because there has been other post about how bad 3" springs rode. But the springs will move in the pocket with the suspension hanging all the way down. I will use them again I'm that happy with them.

The blue truck has cut springs in the front, and lowering hanger in the back with several leafs removed. I'm just starting on the blue truck so a I'm a little unsure of what to do. I'm tempted to try a 2-1/2 drop spindle and the 4" lowering springs and a flip kit out back.

ZUBZ · 11-20-2012, 10:10 AM

Subscribing to this thread.

I am sure this question has been asked 100 times, how do I get the rusted look ?

These trucks are sick.

Wasted Income · 11-20-2012, 11:32 AM

Quote:

Originally Posted by ZUBZ

Subscribing to this thread.

I am sure this question has been asked 100 times, how do I get the rusted look ?

These trucks are sick.

You buy a rusted, original truck.

Fauxtina is kinda lame IMO. You can't fake character.

SLOW POKE · 11-20-2012, 12:02 PM

ultrahd4me thanks for the info. love the trucks you have and am watching the white one on ebay to see what happens.... good luck

ultrahd4me · 11-20-2012, 12:11 PM

Hey thanks. It's not looking very good right now, it was probably a bad decision to list it this week. It's a want to sell not have to deal so we'll see.

jb1016 · 11-20-2012, 09:48 PM

ultrahd, I saw your blue truck on CL and couldn't stop staring at it for about ten minutes. Both trucks are very nice. Bullitben, yours is awesome too.

69chevy lwb · 11-20-2012, 10:33 PM

heres mine 69 c10 292 i6 3 on the tree now with a 3 speed overdrive, airbags front and rear, tubular control arms, painted frame, rust repairs on the floor the last picture is how i found it

lukes63chev · 11-20-2012, 10:41 PM

man, that is some nice lookin truck!!!!!!!!!

93Z71 · 11-20-2012, 10:50 PM

From a cruise at the local McDonalds

71chevswb · 11-21-2012, 12:31 AM

Who owns the "BAPST" truck above ^^?

Anybody on the boards? I have searched it with no luck.
I absolutely love that truck and want more details an pictures!

This is one of my favorite threads on this whole site!

Thanks!
Posted via Mobile Device

*Mister-B* · 11-21-2012, 12:45 AM

Quote:

Originally Posted by 69chevy lwb

heres mine 69 c10 292 i6 3 on the tree now with a 3 speed overdrive, airbags front and rear, tubular control arms, painted frame, rust repairs on the floor the last picture is how i found it

Looks good. Did you paint the checkered grill insert black? Been thinking of doing that myself
Posted via Mobile Device

brn agn · 11-21-2012, 08:48 AM

Quote:

Originally Posted by 71chevswb

Who owns the "BAPST" truck above ^^?

Anybody on the boards? I have searched it with no luck.
I absolutely love that truck and want more details an pictures!

This is one of my favorite threads on this whole site!

Thanks!
Posted via Mobile Device

I don't know him personally, but I see the truck compete at a lot of the Goodguys autocross events. I believe the owner's name is Kevin Bapst. Here are some pictures that I took back in 2010 in Charlotte (the truck has changed a little since then):

If you search for "Kevin Bapst" and "Goodguys", you will find some videos of this truck on the track.

Square_78 · 11-21-2012, 09:28 AM

Quote:

Originally Posted by 69chevy lwb

heres mine 69 c10 292 i6 3 on the tree now with a 3 speed overdrive, airbags front and rear, tubular control arms, painted frame, rust repairs on the floor the last picture is how i found it

Dang thats nice!!! What size notch you have in the back? Did you have to flip the carrier bearing to keep the drive shaft aligned?

69chevy lwb · 11-21-2012, 10:11 AM

Yes I painted the grille black but I used spray paint so even with good prep it only lasted a year, I didn't have to flip my carrrier but the drive shaft moves a ton aired up it points down from the carrier and aired up it points up lol but its as smooth as can be with not vibrations or bi.din I did a 3 inch cnot h and flipped shock brackets with 2 inch drop blo ks with the bags mounted in coil position with a 3/4 inch hat
Posted via Mobile Device

71chevswb · 11-21-2012, 10:40 AM

Quote:

Originally Posted by brn agn

I don't know him personally, but I see the truck compete at a lot of the Goodguys autocross events. I believe the owner's name is Kevin Bapst. Here are some pictures that I took back in 2010 in Charlotte (the truck has changed a little since then):

If you search for "Kevin Bapst" and "Goodguys", you will find some videos of this truck on the track.

Thanks for the help. I searched "Kevin bapst" and "goodguys" together on google and found a good amount of info.

Looks like he is a member here but doesn't visit often.

Link below is to his board name and a thread about the truck.

http://67-72chevytrucks.com/vboard/s...d.php?t=266234
Posted via Mobile Device

50bomb · 11-21-2012, 11:06 AM

Quote:

Originally Posted by 69chevy lwb

heres mine 69 c10 292 i6 3 on the tree now with a 3 speed overdrive, airbags front and rear, tubular control arms, painted frame, rust repairs on the floor the last picture is how i found it

What size steelies and tires are you using? I dig it.

69chevy lwb · 11-21-2012, 11:32 AM

there stock 16 inch steelies with 88 up chevy beauty rings the tires are 31 inch Springfield armor trac there about 20 years old and useless for traction i can get it stuck on level dry dirt lol the fronts are 29 inch herculine also about 20 years old they were on the truck when i got it they sat flat for 16 years before i found it they aired up and have held that air for about a year and a half now

71GeneralMotorsCorp · 11-21-2012, 12:27 PM

Original paint 1968 3/4 ton

11-19-2012, 11:54 PM	#1552
Bullittben Registered User Join Date: Nov 2012 Location: Gilbert, SC Posts: 4	Re: Patina, shop logo'd, rusty trucks? Here's mine. Given to me by the original owner along with tons of paperwork including the original owners manual in the sleeve and the warranty manual and protect-o-plate. 71k miles, never wrecked just a little rusty! Just installed a Muncie M20 behind the factory 250 inline 6. Odd combo but I hate column shift! Posted via Mobile Device Posted via Mobile Device

11-20-2012, 12:46 AM	#1554
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Patina, shop logo'd, rusty trucks? Cool truck, bullitt. A CLR bath would work wonders- bet there's still a lot of factory paint/primer hiding in all that surface rust Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-20-2012, 07:22 AM	#1555
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: Patina, shop logo'd, rusty trucks? Some good looking trucks __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

11-20-2012, 09:08 AM	#1557
SLOW POKE Registered User Join Date: Aug 2011 Location: Texas Posts: 189	Re: Patina, shop logo'd, rusty trucks? ultrahd4me what are the suspension setups for your trucks? __________________ 68 Short step!!

11-20-2012, 09:50 AM	#1558
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: Patina, shop logo'd, rusty trucks? The white truck has 4" lowering springs from Wesern Chassis in the front, and a lowering hanger and 4 leafs removed in the rear. New shocks all around. I'm really suprised on how good the ride is because there has been other post about how bad 3" springs rode. But the springs will move in the pocket with the suspension hanging all the way down. I will use them again I'm that happy with them. The blue truck has cut springs in the front, and lowering hanger in the back with several leafs removed. I'm just starting on the blue truck so a I'm a little unsure of what to do. I'm tempted to try a 2-1/2 drop spindle and the 4" lowering springs and a flip kit out back.

11-20-2012, 10:10 AM	#1559
ZUBZ Registered User Join Date: Nov 2011 Location: Johannesburg, South Africa Posts: 354	Re: Patina, shop logo'd, rusty trucks? Subscribing to this thread. I am sure this question has been asked 100 times, how do I get the rusted look ? These trucks are sick. __________________ ------------------------------------------------------ ZUBZ - C10 "GUS" - JOHANNESBURG, South Africa My 1970 C10 Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=542560

11-20-2012, 12:02 PM	#1561
SLOW POKE Registered User Join Date: Aug 2011 Location: Texas Posts: 189	Re: Patina, shop logo'd, rusty trucks? ultrahd4me thanks for the info. love the trucks you have and am watching the white one on ebay to see what happens.... good luck __________________ 68 Short step!!

11-20-2012, 12:11 PM	#1562
ultrahd4me Registered User Join Date: Dec 2006 Location: Gallatin, Tn Posts: 676	Re: Patina, shop logo'd, rusty trucks? Hey thanks. It's not looking very good right now, it was probably a bad decision to list it this week. It's a want to sell not have to deal so we'll see.

11-20-2012, 10:33 PM	#1564
69chevy lwb Registered User Join Date: Mar 2012 Location: Evanston Posts: 304	Re: Patina, shop logo'd, rusty trucks? heres mine 69 c10 292 i6 3 on the tree now with a 3 speed overdrive, airbags front and rear, tubular control arms, painted frame, rust repairs on the floor the last picture is how i found it __________________ My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928

11-20-2012, 10:41 PM	#1565
lukes63chev Registered User Join Date: Aug 2012 Location: NOR CAL Posts: 81	Re: Patina, shop logo'd, rusty trucks? man, that is some nice lookin truck!!!!!!!!!

11-20-2012, 10:50 PM	#1566
93Z71 Registered User Join Date: Dec 2005 Location: Portsmouth, Ohio Posts: 124	Re: Patina, shop logo'd, rusty trucks? From a cruise at the local McDonalds __________________ Brandon- 1966 Bel Air more door 1968 C/10 Shop Truck: SWB Project coming soon 1996 Silverado Z71 Rest In Peace Mom 5/11/58-12/2/09 RIP Grandma and Grandpa Amanda Royster 9/21/87-2/5/06

11-21-2012, 12:31 AM	#1567
71chevswb Registered User Join Date: Oct 2011 Location: NorthWest Posts: 131	Re: Patina, shop logo'd, rusty trucks? Who owns the "BAPST" truck above ^^? Anybody on the boards? I have searched it with no luck. I absolutely love that truck and want more details an pictures! This is one of my favorite threads on this whole site! Thanks! Posted via Mobile Device

11-21-2012, 10:11 AM	#1571
69chevy lwb Registered User Join Date: Mar 2012 Location: Evanston Posts: 304	Re: Patina, shop logo'd, rusty trucks? Yes I painted the grille black but I used spray paint so even with good prep it only lasted a year, I didn't have to flip my carrrier but the drive shaft moves a ton aired up it points down from the carrier and aired up it points up lol but its as smooth as can be with not vibrations or bi.din I did a 3 inch cnot h and flipped shock brackets with 2 inch drop blo ks with the bags mounted in coil position with a 3/4 inch hat Posted via Mobile Device __________________ My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928

11-21-2012, 11:32 AM	#1574
69chevy lwb Registered User Join Date: Mar 2012 Location: Evanston Posts: 304	Re: Patina, shop logo'd, rusty trucks? there stock 16 inch steelies with 88 up chevy beauty rings the tires are 31 inch Springfield armor trac there about 20 years old and useless for traction i can get it stuck on level dry dirt lol the fronts are 29 inch herculine also about 20 years old they were on the truck when i got it they sat flat for 16 years before i found it they aired up and have held that air for about a year and a half now __________________ My Patinia'd 69 69-http://67-72chevytrucks.com/vboard/showthread.php?t=517537 My RHD 68 http://67-72chevytrucks.com/vboard/s...d.php?t=594928

11-21-2012, 12:27 PM	#1575
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: Patina, shop logo'd, rusty trucks? Original paint 1968 3/4 ton



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.