Project Vitamin C-10 - Page 63 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

scotts62 · 11-25-2009, 10:30 PM

Quote:

Originally Posted by Alan's Classic

Nothing special, I just used single stage PPG paint. At the rate I'm going the drums and calipers will never get hot because it only rolls a few feet at a time.

If it doesn't work I'll redo it with something else.

Strodder · 11-25-2009, 11:30 PM

Those hose crimpers look pricey. But nice. I've used ones like those before, and they work great. Practice first.

jgh64pkup · 11-25-2009, 11:34 PM

i wish i had access to a paint booth

jonzcustomshop · 11-29-2009, 09:50 AM

On the fuel line: what I do first is use a thick piece of bale wire and bend it various ways till I get the route, and shape I want.
when you are done you will have a good pattern to use to figure out your marks for the bends.
hopefully then you only have to do the tube once.

the route I envision from your pic, hugs the front of the block and comes up on the outside corner of the valve cover, then it runs right next to the front edge of the valve cover behind the a/c pump, rounds the corner and runs along the `valve cover intake edge to the carb.

tiggamonsta · 11-29-2009, 11:18 PM

January 2010 issue of Classic Trucks had a good write up of doing an AC installation. He kept the lines hidden as much as possible. Might give you some ideas.

4dranch · 11-30-2009, 08:49 AM

As always Nice work Allen....Thanks for the info and pics.

Alan's Classic · 12-01-2009, 01:26 AM

Quote:

Originally Posted by Captainfab

Keep in mind that you will need to plumb in a fuel filter in there as well.

On my Suburban, I didn't utilize the frame bracket for the transmission shifter either. I just ran a rod from the column down to a bracket I fabbed that bolted to the trans selector shaft. It works just fine.....no problems in 120,000+ miles.

Thanks for the info. I tried to search the web on how to plumb a hot rod or how to identify different fittings and couldn't really find the cliff notes version.

As far as the filter goes. Can I just put the filter down on the rail to clean up the engine? If I'm persuaded to put one between the pump and carb, I'll get one that looks decent. Are the Russell inline filters any good? If so, I'm sure I can just get some AN line nuts to use on this 3/8 line or is there a filter I could use that uses the inverted flare? I've seen filters on late model cars that used an inverted flare, but were ugly and a little to big for this application.

Good reassurance on the shift linkage.

Quote:

Originally Posted by jonzcustomshop

On the fuel line: what I do first is use a thick piece of bale wire and bend it various ways till I get the route, and shape I want.
when you are done you will have a good pattern to use to figure out your marks for the bends.
hopefully then you only have to do the tube once.

the route I envision from your pic, hugs the front of the block and comes up on the outside corner of the valve cover, then it runs right next to the front edge of the valve cover behind the a/c pump, rounds the corner and runs along the `valve cover intake edge to the carb.

We share the same vision. But is it the way it turns out................?

Quote:

Originally Posted by tiggamonsta

January 2010 issue of Classic Trucks had a good write up of doing an AC installation. He kept the lines hidden as much as possible. Might give you some ideas.

I use to have a subscription, but that ended. I stopped today but the grocery store doesn't stock it. I'll keep looking. BTW Thanks.

Quote:

Originally Posted by 4dranch

As always Nice work Allen....Thanks for the info and pics.

Thanks David,

I tried to bend the fuel line the way I wanted it to go. It didn't lay the exact way I thought it would, but still turned out OK so far. I'll fab up a bracket to support and stabilize it around the AC compressor.

sdailey · 12-01-2009, 10:06 AM

Quote:

Originally Posted by Alan's Classic

I tried to bend the fuel line the way I wanted it to go. It didn't lay the exact way I thought it would, but still turned out OK so far. I'll fab up a bracket to support and stabilize it around the AC compressor.

That looks good Alan. What did you end up using for the fuel line?

MacAttack · 12-01-2009, 12:06 PM

Fuel line looks like factory, Alan. Picture detail is perfect.

This is still one of the best threads on the site and I always look forward to catching up and re-reading previous posts.

Mac.

aggie91 · 12-01-2009, 01:25 PM

Alan

Your fuel line looks good. It does look like it is touching the valve cover in the pic, is it? I would think that you would want some clearance around the line to keep the temp of the fuel in the line down some...Just a thought.

Keep up the great work.

It is because of you I started back on mine, progress is slow, it turns out that I have more sheetmetal work on the cab and doors then I expected. I will work on the running gear first. You have been a great motivator for me.

Alan's Classic · 12-01-2009, 04:07 PM

Quote:

Originally Posted by sdailey

That looks good Alan. What did you end up using for the fuel line?

I picked it up at parts plus in town. It's a premade 51" steel line. They have a pretty good assortment of fittings up there.

Quote:

Originally Posted by MacAttack

Fuel line looks like factory, Alan. Picture detail is perfect.

This is still one of the best threads on the site and I always look forward to catching up and re-reading previous posts.

Mac.

Thanks Mac!!

Quote:

Originally Posted by aggie91

Alan

Your fuel line looks good. It does look like it is touching the valve cover in the pic, is it? I would think that you would want some clearance around the line to keep the temp of the fuel in the line down some...Just a thought.

Keep up the great work.

It is because of you I started back on mine, progress is slow, it turns out that I have more sheetmetal work on the cab and doors then I expected. I will work on the running gear first. You have been a great motivator for me.

Thanks karl! Glad I motivated someone. It's hard to stay motivated on this end. It's a constant battle.

The line is not finished yet. When it is there will be enough room to remove the valve cover without much interferrance. I still have a little tweaking to do and also need to fab a bracket for it to help hold it in place. Thanks for the look out.

**Palf70Step** · 12-02-2009, 11:39 PM

I know that feeling. Order what I think I want/need, but then wish i had done something else. Oh well someday it will move without me pushing it.

jgh64pkup · 12-03-2009, 12:42 AM

hey alan your not blue anymore
so you got me interested what did you buy

Alan's Classic · 12-03-2009, 01:01 AM

Quote:

Originally Posted by Palf70Step

I know that feeling. Order what I think I want/need, but then wish i had done something else. Oh well someday it will move without me pushing it.

I thought I was the only one that did that.

Quote:

Originally Posted by jgh64pkup

hey alan your not blue anymore
so you got me interested what did you buy

Damn your quick, I can't get anything by ya'll. I changed my email address and it took the blue away until I confirmed the change.

The suspense is working.

jgh64pkup · 12-03-2009, 01:13 AM

dangit alan wat did u buy

4dranch · 12-03-2009, 08:12 AM

Did you buy another Miata??

tiggamonsta · 12-03-2009, 08:49 AM

Is it smaller then a bread box?

sdailey · 12-03-2009, 08:58 AM

Oh, I know what it is.

What's it worth to ya'll to find out?

lyrikz · 12-03-2009, 01:09 PM

Quote:

Originally Posted by sdailey

Oh, I know what it is.

What's it worth to ya'll to find out?

HOW DID I MISS THIS THREAD!!!!!

Awesome work man. AWESOME.

4dranch · 12-03-2009, 02:06 PM

Alan.
Is it your new truck hauler coming????

jgh64pkup · 12-03-2009, 09:49 PM

ummm no i dont think thats a good picture maybe that one u posted a while back
you know the one

lol

Strodder · 12-03-2009, 10:17 PM

I don't remember???
How about a Doll that Blows.

jgh64pkup · 12-03-2009, 10:50 PM

im sorry alan we thread jacked you
but its your fault because you wont tell us what you bought

Alan's Classic · 12-04-2009, 01:15 AM

Quote:

Originally Posted by jgh64pkup

dangit alan wat did u buy

Quote:

Originally Posted by 4dranch

Did you buy another Miata??

No, that phase is pretty much over.

Quote:

Originally Posted by tiggamonsta

Is it smaller then a bread box?

Clue: Which piece? No it's not truck parts.

Quote:

Originally Posted by sdailey

Oh, I know what it is
What's it worth to ya'll to find out?

Remember, I'm teaching you body work.

Your cab is also locked up in my shop.

Quote:

Originally Posted by lyrikz

HOW DID I MISS THIS THREAD!!!!!

Awesome work man. AWESOME.

I miss alot of things on here also. BTW thanks.

Quote:

Originally Posted by 4dranch

Alan.
Is it your new truck hauler coming????

Thats cool, nearly a perfect match as far as paint goes.

Quote:

Originally Posted by Strodder

Dam it Allan what did you buy a blow up doll??? :haha haha

No, but it is still an option.

Quote:

Originally Posted by Strodder

How about this kind of blow up doll?? :haha

UUHHHH.........no. That is hideous.

Quote:

Originally Posted by Strodder

I don't remember???
How about a Doll that Blows.

Now that is funny.

Quote:

Originally Posted by jgh64pkup

im sorry alan we thread jacked you
but its your fault because you wont tell us what you bought

I don't mind the jack, but Dennis' pic of the " he-she-it has to go.

Strodder · 12-04-2009, 01:34 PM

This one almost looks real.

QUOTE: I don't mind the jack, but Dennis' pic of the " he-she-it has to go.
I did what you wanted, now tell us what you bought.

11-25-2009, 11:30 PM	#2
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 Those hose crimpers look pricey. But nice. I've used ones like those before, and they work great. Practice first. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 11-25-2009 at 11:30 PM.

11-25-2009, 11:34 PM	#3
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Project Vitamin C-10 i wish i had access to a paint booth __________________ Gage 1967 C10 Shortbed Stepside

11-29-2009, 09:50 AM	#4
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: Project Vitamin C-10 On the fuel line: what I do first is use a thick piece of bale wire and bend it various ways till I get the route, and shape I want. when you are done you will have a good pattern to use to figure out your marks for the bends. hopefully then you only have to do the tube once. the route I envision from your pic, hugs the front of the block and comes up on the outside corner of the valve cover, then it runs right next to the front edge of the valve cover behind the a/c pump, rounds the corner and runs along the `valve cover intake edge to the carb. __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

11-29-2009, 11:18 PM	#5
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: Project Vitamin C-10 January 2010 issue of Classic Trucks had a good write up of doing an AC installation. He kept the lines hidden as much as possible. Might give you some ideas.

11-30-2009, 08:49 AM	#6
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project Vitamin C-10 As always Nice work Allen....Thanks for the info and pics. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

12-01-2009, 12:06 PM	#9
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: Project Vitamin C-10 Fuel line looks like factory, Alan. Picture detail is perfect. This is still one of the best threads on the site and I always look forward to catching up and re-reading previous posts. Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

12-01-2009, 01:25 PM	#10
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Project Vitamin C-10 Alan Your fuel line looks good. It does look like it is touching the valve cover in the pic, is it? I would think that you would want some clearance around the line to keep the temp of the fuel in the line down some...Just a thought. Keep up the great work. It is because of you I started back on mine, progress is slow, it turns out that I have more sheetmetal work on the cab and doors then I expected. I will work on the running gear first. You have been a great motivator for me. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

12-02-2009, 11:39 PM	#12
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,761	Re: Project Vitamin C-10 I know that feeling. Order what I think I want/need, but then wish i had done something else. Oh well someday it will move without me pushing it. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-03-2009, 12:42 AM	#13
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Project Vitamin C-10 hey alan your not blue anymore so you got me interested what did you buy __________________ Gage 1967 C10 Shortbed Stepside

12-03-2009, 01:13 AM	#15
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Project Vitamin C-10 dangit alan wat did u buy __________________ Gage 1967 C10 Shortbed Stepside

12-03-2009, 08:12 AM	#16
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project Vitamin C-10 Did you buy another Miata?? __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

12-03-2009, 08:49 AM	#17
tiggamonsta Registered User Join Date: Aug 2008 Location: Cedar Creek, TX Posts: 167	Re: Project Vitamin C-10 Is it smaller then a bread box?

12-03-2009, 08:58 AM	#18
sdailey The Few, The Proud Join Date: Jun 2007 Location: Ball Ground, Georgia Posts: 1,830	Re: Project Vitamin C-10 Oh, I know what it is. What's it worth to ya'll to find out? __________________ Shannon

12-03-2009, 02:06 PM	#20
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: Project Vitamin C-10 Alan. Is it your new truck hauler coming???? Attached Images __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

12-03-2009, 09:49 PM	#21
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Project Vitamin C-10 ummm no i dont think thats a good picture maybe that one u posted a while back you know the one lol __________________ Gage 1967 C10 Shortbed Stepside



Register or Log In To remove these advertisements.

12-03-2009, 10:17 PM	#22
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 I don't remember??? How about a Doll that Blows. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

12-03-2009, 10:50 PM	#23
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Project Vitamin C-10 im sorry alan we thread jacked you but its your fault because you wont tell us what you bought __________________ Gage 1967 C10 Shortbed Stepside

12-04-2009, 01:34 PM	#25
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Project Vitamin C-10 This one almost looks real. QUOTE: I don't mind the jack, but Dennis' pic of the " he-she-it has to go. I did what you wanted, now tell us what you bought. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT* Last edited by Strodder; 12-04-2009 at 01:35 PM.

Register or Log In To remove these advertisements.