The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-20-2015, 10:51 AM   #1551
Chaplain
Registered User
 
Chaplain's Avatar
 
Join Date: Oct 2014
Location: TN
Posts: 294
Re: Restoring Rusty

Quote:
Originally Posted by Gregski View Post
Well you don't remove it at the end you did, LOL cause there you have to pay attention to the splines, if you leave it attached to the gear box like I did and separate the other end from the tie rod linkage then even Ray Charles can put it back on correctly with his feet, hee hee

Seriously though you should be ok, end to end is about 3 to 3.5 turns, so turn it all the way to one end, then turn it all the way to the other and count the revolutions then put the splines in the middle, the pitman arm when on points almost towards the driver, trial and error won't hurt either, put it on and twist the steering wheel if you are a tooth off pop it off and adjust (of course without driving, but when parked)
Oh that makes sense. I was getting worked up for nothing. Last time I did one of these was in 1998 when I was working on my 1980 K5 Blazer.

Thanks...for the build thread (wink wink).
Chaplain is offline   Reply With Quote
Old 04-20-2015, 01:41 PM   #1552
bnoon
Registered User
 
Join Date: Jul 2012
Location: Des Moines IA
Posts: 1,250
Re: Restoring Rusty

Quote:
Originally Posted by hatzie View Post
Dump procured large 1970's home range with working oven. I put it near the door to the barn, removed the top elements, and added exhaust pipe to the oven vent. You could use a long cord and roll it outside on casters too. It bakes V8 cylinder head sized pieces. Any larger and I'd need to roll my own oven. It's a hobby. If I need some larger stuff baked I can get someone else to do it.
SWMBO wouldn't like it if you used her range for powder coating or baking parts. It takes forever to get that burning oil smell out of the house... That industrial waste aftertaste in the casserole would be kinda rough too.
Same thing here. Funny story in that I found the oven on craigslist and went to pick it up and the whole neighborhood was the reverse floor plan of my parent's place where I grew up. Every house was like a mirror of my childhood. Creeped me out. The house still had the old green short shag carpet, original 1972 cabinets, and soft sea foam green appliances... Pseudo world feeling...
__________________
- 1981 Sierra 454, NV4500 swap
- 2006 Z06, 25k miles
- 1973 Nova - Project CarNova Virus on Youtube
bnoon is offline   Reply With Quote
Old 04-20-2015, 04:35 PM   #1553
rusty76
Registered User
 
rusty76's Avatar
 
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
Re: Restoring Rusty

You're knocking down the list inch by inch. Keep giving it gravy.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873
The low buck build threads. Check'em out!
http://67-72chevytrucks.com/vboard/s...d.php?t=666022
My build thread
Crossmembers CC
rusty76 is offline   Reply With Quote
Old 04-20-2015, 05:07 PM   #1554
longhorn70gmc
Senior Member
 
longhorn70gmc's Avatar
 
Join Date: Feb 2001
Location: Ridgecrest. CA, USA
Posts: 1,715
Re: Restoring Rusty

This has got to be the most impressive, enjoyable Build Thread I have ever read/viewed on here, my applause and gratitude to an excitable posting of your restore. Your truck looks very nice and what has made it enjoyable is to watch you use low dollar application and approach to it, it’s a truck right. Very nice, thanks for the fun and enjoyment! I want to say I can't wait till you get it done, but I want to keep enjoying your posts with it and pictures to keep it going like a book series or something. Well done my Board Brother!!!
__________________
Billy

1970 GMC Sierra Grande 402/TH400
(Longhorn)14 years and counting rebuild!
1975 (Build) Chevrolet SWB 4X4 350 SB Lifted 6 inches
1970 Ford F250 Ranger 390 BB
2010 Ford Super Duty F250 XLT W/4 inch lift kit and Pro Comp Tires
Hub Cap Freak!
I need another truck like I need another hole in the head!
I'M IN THE MARKET...AS IT WERE!
longhorn70gmc is offline   Reply With Quote
Old 04-21-2015, 09:49 AM   #1555
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

Quote:
Originally Posted by longhorn70gmc View Post
This has got to be the most impressive, enjoyable Build Thread I have ever read/viewed on here, my applause and gratitude to an excitable posting of your restore.
Well great, now I'll never be able to cut another corner or half donkey anything else, jk, thank you so much this made my day.
Gregski is offline   Reply With Quote
Old 04-21-2015, 05:26 PM   #1556
rusty76
Registered User
 
rusty76's Avatar
 
Join Date: Sep 2012
Location: Midway, NC
Posts: 3,275
Re: Restoring Rusty

No pressure really.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=581873
The low buck build threads. Check'em out!
http://67-72chevytrucks.com/vboard/s...d.php?t=666022
My build thread
Crossmembers CC
rusty76 is offline   Reply With Quote
Old 04-21-2015, 09:18 PM   #1557
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

so went one day without wrenchin on the truck, and that nearly keewed me, you know what I mean fellas

decided to go to the gym... dang it I can't lie to you guys, the wife made me watch Game of Thrones, don't judge me ok, dragons are cool, hee hee

so today I decided to take a look at #7 on the list, aka the low fidelity radio in all its AM glory

first order of business, gather sum tools... hey how did that get in there
Attached Images
 
Gregski is offline   Reply With Quote
Old 04-21-2015, 09:22 PM   #1558
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty - Radio Repair

I'll admit it I wasn't too keen on removing the radio cause I thought I would have to take the gauge cluster housing off... AGAIN, so I was pleasantly surprised when I didn't have to, take that cars of the 80s, 90s, 00s, you get the idea
Attached Images
    
Gregski is offline   Reply With Quote
Old 04-21-2015, 09:25 PM   #1559
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

man just when I thought I couldn't love this truck any more, it makes this job so easy, thank you Rusty

one 11/32 nut in the back and 7 minutes later...
Attached Images
 
Gregski is offline   Reply With Quote
Old 04-21-2015, 09:27 PM   #1560
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

also removed the speaker (singular, funny to even say that) yeah man I installed a new speaker in my truck today, what did you work on?
Attached Images
   
Gregski is offline   Reply With Quote
Old 04-21-2015, 09:30 PM   #1561
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

and some close ups of that bad boy

oh man and that perfect speaker wire, only fits one way, dummy proof, perfect polarity every time, I just want to hug that GM engineer, thank you
Attached Images
  
Gregski is offline   Reply With Quote
Old 04-21-2015, 09:33 PM   #1562
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

stop teasing us Greg and shows us that darn radio man

hey watch your tone (get it, LOL... tone)
Attached Images
   
Gregski is offline   Reply With Quote
Old 04-21-2015, 09:35 PM   #1563
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

you all know how much I love anatomy shots, so here it is the complete mind blowing low fidelity "entertainment" system circa 1974

I swear I heard the radio come on for a second when I tested it at the battery and play ".... another one bites the dust... another one bites the dust!"
Attached Images
 
Gregski is offline   Reply With Quote
Old 04-21-2015, 09:39 PM   #1564
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty - Help Me Fix My Radio

ok, so it's out and it's not working, now what?
Attached Images
   
Gregski is offline   Reply With Quote
Old 04-21-2015, 10:29 PM   #1565
greg64
Registered User
 
greg64's Avatar
 
Join Date: Dec 2007
Location: Kimberley, BC, Canada
Posts: 799
Re: Restoring Rusty

Greg, I'm not sure how to advise you. Electrical troubleshooting is a different kettle of fish than mechanical troubleshooting. It might just be a connection problem, or a bad solder joint, but there's lots of other possibilities.

A while back, I came across a retired guy on eBay who fixes and sells radios like yours. Maybe that's something to consider. Here's one of his ads. Upgrade time?
http://www.ebay.com/itm/Working-1980...e3fb3c&vxp=mtr
__________________
Greg
64 GMC Suburban - 283, NV3500, 14 bolt
77 C10 swb - 292, SM465, 12 bolt

Last edited by greg64; 04-21-2015 at 10:49 PM.
greg64 is offline   Reply With Quote
Old 04-21-2015, 10:31 PM   #1566
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
Re: Restoring Rusty

Are you repairing the original AM radio? I'm diggin that idea, and hearing it do some monaural jam on Exile through a new 4x10.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 04-21-2015, 10:37 PM   #1567
enaberif
Registered User
 
Join Date: Jan 2009
Location: Calgary, AB
Posts: 1,181
Re: Restoring Rusty

LOL that stereo is filthy! I can't say if its stock to my truck or not but my truck (1974) has a AM/FM/Tape deck in it.
enaberif is offline   Reply With Quote
Old 04-21-2015, 10:43 PM   #1568
Titomars
Registered User
 
Titomars's Avatar
 
Join Date: Feb 2015
Location: Santa Rosa, Ca.
Posts: 539
Re: Restoring Rusty

Man, me thinks Gregski's truck was once an off roader by the layer of dust in that radio. That amount of dust can kill radios. My Jeep goes through stereos about once every 2 years. I personally would look for something in an upgrade.
__________________
1977 Chevrolet C/10 Silverado. Step-Side, Factory 454, TH400, 3.73 Posi 12 Bolt.
1975 Chevrolet El Camino. 350, TH400, 3.08 Posi 10 Bolt.
Titomars is offline   Reply With Quote
Old 04-21-2015, 10:44 PM   #1569
greg64
Registered User
 
greg64's Avatar
 
Join Date: Dec 2007
Location: Kimberley, BC, Canada
Posts: 799
Re: Restoring Rusty

Greg, if you do get the radio working again, I saw a neat adapter a while back that you insert into the antenna wire. This allows any modern source to be hooked up, and it plays through the stock radio. Pretty neat.
__________________
Greg
64 GMC Suburban - 283, NV3500, 14 bolt
77 C10 swb - 292, SM465, 12 bolt
greg64 is offline   Reply With Quote
Old 04-21-2015, 10:58 PM   #1570
Titomars
Registered User
 
Titomars's Avatar
 
Join Date: Feb 2015
Location: Santa Rosa, Ca.
Posts: 539
Re: Restoring Rusty

I put one of these in my 77. I was not going to cut my perfect unaltered dash.

http://www.classicindustries.com/pro...ts/te605b.html

I used this speaker setup for the front.

http://www.classicindustries.com/pro...rts/s5013.html

I already had a very nice set of 6X9's for behind the seats.
__________________
1977 Chevrolet C/10 Silverado. Step-Side, Factory 454, TH400, 3.73 Posi 12 Bolt.
1975 Chevrolet El Camino. 350, TH400, 3.08 Posi 10 Bolt.
Titomars is offline   Reply With Quote
Old 04-21-2015, 11:06 PM   #1571
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

Quote:
Originally Posted by greg64 View Post
A while back, I came across a retired guy on eBay who fixes and sells radios like yours. Maybe that's something to consider. Here's one of his ads. Upgrade time?
http://www.ebay.com/itm/Working-1980...e3fb3c&vxp=mtr
Thank you so much for the link I added his auction to my Watch List, I love supporting guys like that (if I can)
Gregski is offline   Reply With Quote
Old 04-21-2015, 11:39 PM   #1572
greg64
Registered User
 
greg64's Avatar
 
Join Date: Dec 2007
Location: Kimberley, BC, Canada
Posts: 799
Re: Restoring Rusty

Quote:
Originally Posted by Gregski View Post
Thank you so much for the link I added his auction to my Watch List, I love supporting guys like that (if I can)
No problem. The fellow obviously knows what he is doing. Maybe you could ship your radio to him for repair? Also, there are factory Delco manuals for repairing these radios out there, if you want to have a go yourself.
__________________
Greg
64 GMC Suburban - 283, NV3500, 14 bolt
77 C10 swb - 292, SM465, 12 bolt
greg64 is offline   Reply With Quote
Old 04-22-2015, 10:01 AM   #1573
Gregski
Post Whore
 
Gregski's Avatar
 
Join Date: Aug 2014
Location: Sacramento, CA
Posts: 10,840
Re: Restoring Rusty

Quote:
Originally Posted by enaberif View Post
I can't say if its stock to my truck or not but my truck (1974) has a AM/FM/Tape deck in it.
Whoa, am, FM, and Cassette? now you're just rubbin' it in, next thing you're gonna tell me is you have twice the amount of speakers as I do, as if that's somehow possible, why would anyone need more than one speaker, LOL, jk
Gregski is offline   Reply With Quote
Old 04-22-2015, 10:10 AM   #1574
enaberif
Registered User
 
Join Date: Jan 2009
Location: Calgary, AB
Posts: 1,181
Re: Restoring Rusty

Quote:
Originally Posted by Gregski View Post
Whoa, am, FM, and Cassette? now you're just rubbin' it in, next thing you're gonna tell me is you have twice the amount of speakers as I do, as if that's somehow possible, why would anyone need more than one speaker, LOL, jk
Nope! Single speaker lol. But I also have no antenna
enaberif is offline   Reply With Quote
Old 04-22-2015, 11:21 AM   #1575
hatzie
Moderator
 
hatzie's Avatar
 
Join Date: Oct 2008
Location: Wentworth, NH
Posts: 4,975
Re: Restoring Rusty

That's probably the U63 Delco 41APB1 radio GM used in base trucks and some of the cars in '74.
Radio service manuals for the 1970's & 1980's radios are very hard to come by. This was right on the edge of the truly throw-away radios. The guys that did this kind of service work tend to hang onto their paper manuals and keep them "in the family" of radio enthusiasts. It's almost blasphemy to let this information outside the community.
Repair of even non working units is not that difficult but re-aligning the receiver coils, if they need it, is an art and not that easy without some guidance.
That being said they do show up with more regularity on Fleabay than they used to... Here's a SAMS Photofact manual for the 1974 AM/FM radios. It may be close enough if you're not frightened of older electronics. http://www.ebay.com/itm/1974-1975-CH...28488685&rt=nc
EDIT: I found a 1974 Delco all GM models radio manual and bought it. I'll scan it and post it up in the manuals thread. Probably after the end of the month. If you want the paper original once I'm done we can make a deal. I've been on the lookout for these for some time and this one popped up at a reasonably inexpensive shipped price. Usually the seller seems to think they're printed with platinum ink on gold plates.
__________________
1959 M35A2 LDT465-1D SOLD
1967 Dodge W200 B383, NP420/NP201 SOLD
1969 Dodge Polara 500 B383, A833 SOLD
1972 Ford F250 FE390, NP435/NP205 SOLD
1976 Chevy K20, 6.5L, NV4500/NP208 SOLD
1986 M1008 CUCV SOLD
2000 GMC C2500, TD6.5L, NV4500
2005 Chevy Silverado LS 2500HD 6.0L 4L80E/NP263
2009 Impala SS LS4 V8


RTFM... GM Parts Books, GM Schematics, GM service manuals, and GM training materials...Please include at least the year and model in your threads. It'll be easier to answer your questions.
And please let us know if and how your repairs were successful.

Last edited by hatzie; 04-22-2015 at 11:58 AM.
hatzie is online now   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:10 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com