Daverods project 66 - Page 64 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 04-01-2010, 01:19 PM

Quote:

Originally Posted by jason65

Looking good Dave.

Thanks Jason. Things at work are slow so thats good for my truck.

Strodder · 04-01-2010, 08:52 PM

x-2

daverod · 04-02-2010, 04:08 PM

Took the pup for a ride to the getto. Took some pictures. Damn graffiti busters are making it hard to find any good spots.

Did a good burn out. Got stuck in a pot hole

bubba327 · 04-02-2010, 06:39 PM

Should be on the cover of a magazine!!
If you want graffiti ,ya should have gone to the union pacific yard.
And the pup looks proud to be in such a nice ride. It has come along ways from its camper days

daverod · 04-02-2010, 07:26 PM

Had to mess with the pictures. Thought about the rail yard but there was a lot of signs. I would'nt stick my hand inside the truck the pup has a full set of teeth now.

Just ask the guy at the metal scrap yard. Dumba$$ put his hand in there and tried to pet him.

Pictures look a lot better as toons. Gotta love photebucket.

Alan's Classic · 04-03-2010, 07:21 PM

Cool pics you have there. I haven't been posting much here on your thread, but still watching.

Strodder · 04-03-2010, 10:39 PM

Nice pictures Dave. Looks Kewl

jgh64pkup · 04-04-2010, 02:48 AM

love the pics dave

daverod · 04-08-2010, 11:02 AM

Stupid question . Why does my engine have a bolt hole at the top for the trans., But the trans has no hole? Built a floor frame for the back. Going to put 3/16 metal over it.

daverod · 04-08-2010, 11:04 AM

Need to box in my frame. Cleaned off some more old paint.

bubba327 · 04-08-2010, 04:48 PM

Looking good .. What donated the fuel tank?? With the 3/16" steel for the floor of the bed, is it to be diamond plate or flat steel? I thought of rhino lining the floor of the bed and using plate steel also. Would add weight at least.
Used to be a thread on here about using a steel bed from a newer truck There may a spacing issue below the fenders where the thickness of the wood is no longer there.. Git'er done and take pictures.

jgh64pkup · 04-08-2010, 10:18 PM

on the engine and tranny Q
all of the ones ive ever seen have been like that
im not sure why

daverod · 04-09-2010, 12:07 AM

Quote:

Originally Posted by jgh64pkup

on the engine and tranny Q
all of the ones ive ever seen have been like that
im not sure why

daverod · 04-09-2010, 12:09 AM

Quote:

Originally Posted by bubba327

Looking good .. What donated the fuel tank?? With the 3/16" steel for the floor of the bed, is it to be diamond plate or flat steel? I thought of rhino lining the floor of the bed and using plate steel also. Would add weight at least.
Used to be a thread on here about using a steel bed from a newer truck There may a spacing issue below the fenders where the thickness of the wood is no longer there.. Git'er done and take pictures.

I think the tank came out of a van. Fits good. I'm going to cover the top and sides in 3/16 plate. Metal place did have some diamond plate for .25 a pound.

joe231 · 04-09-2010, 10:37 PM

Dang!
I've missed a ton!
Nice work!
For some reason I'm thinking the bell housing on the heavy duty granny 4 speed trans has a hole for that top threaded hole, maybe I'm just

**Captainfab** · 04-11-2010, 01:13 AM

Making some nice progress

Is there a reason you are wanting to use 3/16's? That's going to add some weight.....

*lakeroadster* · 04-11-2010, 08:22 AM

Quote:

Originally Posted by Captainfab

Making some nice progress

Is there a reason you are wanting to use 3/16's? That's going to add some weight.....

x2

Your truck really looks good, love the patina.

You might want to go with 10 guage (0.1345) or 12 gauge (0.1046)?

daverod · 04-11-2010, 10:08 AM

Quote:

Originally Posted by Captainfab

Making some nice progress

Is there a reason you are wanting to use 3/16's? That's going to add some weight.....

I want weight. I'm not going to have a wood bed. Maybe I will wrap the gas tank in somthing thinner.

Quote:

Originally Posted by lakeroadster

x2

Your truck really looks good, love the patina.

You might want to go with 10 guage (0.1345) or 12 gauge (0.1046)?

Thanks Lakeroadster

Quote:

Originally Posted by joe231

Dang!
I've missed a ton!
Nice work!
For some reason I'm thinking the bell housing on the heavy duty granny 4 speed trans has a hole for that top threaded hole, maybe I'm just

I was just worried about the hole but I'm guessing it normal.

idaho66stepside · 04-11-2010, 06:18 PM

Great pics of your truck! I took a few of my stepside by the railroad building here in Twin Falls. Cool backgrounds

daverod · 04-11-2010, 07:42 PM

Quote:

Originally Posted by idaho66stepside

Great pics of your truck! I took a few of my stepside by the railroad building here in Twin Falls. Cool backgrounds

So get them posted.

Always good to see an Idaho truck.

daverod · 04-12-2010, 11:08 PM

Built a floor for the rear of my truck.

Still waiting for my top bag brackets.

Should have made them.

ruffrida2005 · 04-12-2010, 11:17 PM

Hey Dave have you already ordered them I could probably make you some. or just send you mine and make me some more.

daverod · 04-12-2010, 11:22 PM

Ordered 3/28/10

Good thing I'm in no hurry.

I guess I'm just use to Brothers. I get their stuff in 2 days . Thanks anyway Paul.

Put a new fuel sender in my 64. Now I don't have to carry a 2 gal gas can everywhere. Got my frame boxed in. Still need to box in the back.

ruffrida2005 · 04-12-2010, 11:37 PM

where you order it from SD? I just ordered some rod ends I hope dont take a long time. I know they are always swamped this time of year.

daverod · 04-12-2010, 11:40 PM

SD said they were very busy.

Too bad.

04-01-2010, 08:52 PM	#1577
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 x-2 __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-02-2010, 04:08 PM	#1578
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Took the pup for a ride to the getto. Took some pictures. Damn graffiti busters are making it hard to find any good spots. Did a good burn out. Got stuck in a pot hole Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-02-2010, 06:39 PM	#1579
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Should be on the cover of a magazine!! If you want graffiti ,ya should have gone to the union pacific yard. And the pup looks proud to be in such a nice ride. It has come along ways from its camper days __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

04-02-2010, 07:26 PM	#1580
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Had to mess with the pictures. Thought about the rail yard but there was a lot of signs. I would'nt stick my hand inside the truck the pup has a full set of teeth now. Just ask the guy at the metal scrap yard. Dumba$$ put his hand in there and tried to pet him. Pictures look a lot better as toons. Gotta love photebucket. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-03-2010 at 12:06 AM.

04-03-2010, 07:21 PM	#1581
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Daverods project 66 Cool pics you have there. I haven't been posting much here on your thread, but still watching. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

04-03-2010, 10:39 PM	#1582
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Nice pictures Dave. Looks Kewl __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-04-2010, 02:48 AM	#1583
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 love the pics dave __________________ Gage 1967 C10 Shortbed Stepside

04-08-2010, 11:02 AM	#1584
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Stupid question . Why does my engine have a bolt hole at the top for the trans., But the trans has no hole? Built a floor frame for the back. Going to put 3/16 metal over it. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-08-2010, 11:04 AM	#1585
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Need to box in my frame. Cleaned off some more old paint. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-08-2010, 04:48 PM	#1586
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Looking good .. What donated the fuel tank?? With the 3/16" steel for the floor of the bed, is it to be diamond plate or flat steel? I thought of rhino lining the floor of the bed and using plate steel also. Would add weight at least. Used to be a thread on here about using a steel bed from a newer truck There may a spacing issue below the fenders where the thickness of the wood is no longer there.. Git'er done and take pictures. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

04-08-2010, 10:18 PM	#1587
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Daverods project 66 on the engine and tranny Q all of the ones ive ever seen have been like that im not sure why __________________ Gage 1967 C10 Shortbed Stepside

04-09-2010, 10:37 PM	#1590
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Daverods project 66 Dang! I've missed a ton! Nice work! For some reason I'm thinking the bell housing on the heavy duty granny 4 speed trans has a hole for that top threaded hole, maybe I'm just __________________ *CHEVY ONLY*

04-11-2010, 01:13 AM	#1591
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Daverods project 66 Making some nice progress Is there a reason you are wanting to use 3/16's? That's going to add some weight..... __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-11-2010, 06:18 PM	#1594
idaho66stepside Registered User Join Date: Feb 2010 Location: Twin Falls, ID Posts: 119	Re: Daverods project 66 Great pics of your truck! I took a few of my stepside by the railroad building here in Twin Falls. Cool backgrounds Last edited by idaho66stepside; 04-11-2010 at 06:19 PM.

04-12-2010, 11:08 PM	#1596
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Built a floor for the rear of my truck. Still waiting for my top bag brackets. Should have made them. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"



Register or Log In To remove these advertisements.

04-12-2010, 11:17 PM	#1597
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 Hey Dave have you already ordered them I could probably make you some. or just send you mine and make me some more. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-12-2010, 11:22 PM	#1598
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Ordered 3/28/10 Good thing I'm in no hurry. I guess I'm just use to Brothers. I get their stuff in 2 days . Thanks anyway Paul. Put a new fuel sender in my 64. Now I don't have to carry a 2 gal gas can everywhere. Got my frame boxed in. Still need to box in the back. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-12-2010 at 11:29 PM.

04-12-2010, 11:37 PM	#1599
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 where you order it from SD? I just ordered some rod ends I hope dont take a long time. I know they are always swamped this time of year. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

04-12-2010, 11:40 PM	#1600
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 SD said they were very busy. Too bad. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

Register or Log In To remove these advertisements.