What did you do to your truck today! - Page 64 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

darkolive71 · 02-07-2011, 11:52 PM

I dropped driveshaft parts off to have a new one made. As soon as it gets done I can drive it for the first time as a 4x4. I bet it drives different than it did as a 2wd.

71AteLugger · 02-08-2011, 12:00 AM

I cut a hole in my door to match my donor 72 right door... Pioneer 6x9's coming soon.

MadDog · 02-08-2011, 12:20 AM

installed the head light bezels on my 70 GMC, bolted the bed to the fram, and took the tailgate handle out of my old bed so i can get it painted to match the new tailgate..

ItsRandy · 02-08-2011, 12:52 AM

Sanded my frame. My finger tips are sore!
Posted via Mobile Device

*project 67 sub* · 02-08-2011, 02:05 AM

adjusted the pb panhard bar and threw a quick crappy paint job on my glove box door will redo it better later. and took a couple of pics of the clearance of the pb bar and brackets just perfect lol. and also took a pic of the part of the rear brake line that i can see from underneath.

Name: Photo02071738.jpg
Views: 621
Size: 95.8 KB

Name: Photo02071738.jpg
Views: 621
Size: 95.8 KB

Name: Photo02072126.jpg
Views: 622
Size: 65.1 KB

Name: Photo02072131.jpg
Views: 616
Size: 84.5 KB

Name: Photo02072129.jpg
Views: 617
Size: 82.9 KB

BadaSs_Cal · 02-08-2011, 04:10 AM

Starting to make my intake shiny.

ramey · 02-08-2011, 09:30 PM

stole a q-jet from my uncle today. he knew i was gettin it, he's got twenty layin around. gonna rebuild it tomorrow n put it on the 69, n ima take the holley off and throw it as far as i can!

60ratrod · 02-08-2011, 09:53 PM

Quote:

Originally Posted by ramey

stole a q-jet from my uncle today. he knew i was gettin it, he's got twenty layin around. gonna rebuild it tomorrow n put it on the 69, n ima take the holley off and throw it as far as i can!

hey just send it to prostreet. he's a holley guy. otherwise it isn't even worth the effort to me to throw a holley. EDELBROCK

Dano69c10 · 02-08-2011, 10:30 PM

Removed the trailing arms off of my rear axle, luckily no issues.

glider_6969 · 02-08-2011, 10:42 PM

Tonight I installed my new overflow bottle that I picked up at an Auto zone for about $10 bucks with the bracket,for the radiator. I was debating on were to mount it. I think I found a good spot. I made a bracket that wraps around the battery and bolted it to the rad support, then mount the bottle bracket to it.
Name: overflowbottle 003.jpg
Views: 564
Size: 39.4 KB

Name: overflowbottle 003.jpg
Views: 564
Size: 39.4 KB

Name: overflowbottle 002.jpg
Views: 564
Size: 28.2 KB

ItsRandy · 02-08-2011, 11:37 PM

Sanded my frame. Did I tell you my finger tips are sore?
Posted via Mobile Device

67chevy1series · 02-08-2011, 11:42 PM

started making my buddy bucket seat adjuster lever since when i bought my seat it was broken! so any one who wants to make on you will need :
one 8'' or however long or short you want it rod 1/2 inch thick round stock rod

and a grinder with a 80 grit sander to make it nice and smooth after you grind it down

and a torch to bend it how ever you want and some bolts i am thinking a 3/8th or 5/16 th bolts and nuts

ChevLoRay · 02-12-2011, 12:28 PM

Quote:

Originally Posted by ItsRandy

Sanded my frame. Did I tell you my finger tips are sore?
Posted via Mobile Device

You didn't use sandpaper, or scotchbrite or a brush or wheel?

ItsRandy · 02-13-2011, 01:55 AM

Quote:

Originally Posted by ChevLoRay

You didn't use sandpaper, or scotchbrite or a brush or wheel?

Sandpaper.
Posted via Mobile Device

*project 67 sub* · 02-09-2011, 02:33 AM

not a whole lot but i repainted my gauge bezels and started installing them in the cluster. now i need to buy the rest of the gauges so i can finish it, and also make/cut out a piece so i can install my gas gauge and turn signal lights in the cluster.

Name: Photo02081552.jpg
Views: 539
Size: 88.0 KB

Name: Photo02081552.jpg
Views: 539
Size: 88.0 KB

Name: Photo02082035.jpg
Views: 530
Size: 79.9 KB

Name: Photo02082038.jpg
Views: 541
Size: 76.0 KB

Name: Photo02082038_1.jpg
Views: 534
Size: 54.2 KB

Name: Photo02082037_1.jpg
Views: 539
Size: 81.8 KB

*project 67 sub* · 02-09-2011, 02:33 AM

Name: Photo02082037.jpg
Views: 536
Size: 72.6 KB

Keller · 02-09-2011, 11:35 PM

I tracked down a ground issue and got it to start!

RickBost · 02-10-2011, 12:00 AM

I got the truck to run under its own power for the first time since i onwed it and now the tranny is bad. I am still trying to figure out if a t-10 will bolt to and use the clutch from the m-20?

mcmlxix · 02-10-2011, 01:14 AM

I picked up a set of Hummer H2 chrome rims and tires for $200...

*project 67 sub* · 02-10-2011, 01:50 AM

i installed my sun visors back in the burb

ItsRandy · 02-10-2011, 02:04 AM

I picked up a small soda blaster to finish cleaning my frame, it works real good and my fingers won't be sore anymore.
Posted via Mobile Device

blazerboy_4life · 02-10-2011, 02:42 AM

Quote:

Originally Posted by ItsRandy

I picked up a small soda blaster to finish cleaning my frame, it works real good and my fingers won't be sore anymore.
Posted via Mobile Device

What did you go with and how well does it work?

ItsRandy · 02-11-2011, 10:20 PM

Quote:

Originally Posted by blazerboy_4life

What did you go with and how well does it work?

Harbor Freight, it holds 40lbs of baking soda and it works great. I used it for about an hour and got as much done as I did the previous 8 hours. There are places I was able to get clean (paint and grime free), like around rivet heads and where brackets are attached to the frame, that I wouldn't have been able to get to with sand paper. WEAR A RESPIRATOR IT IS VERY DUSTY!
Posted via Mobile Device

67Slider · 02-10-2011, 07:22 PM

I took the day off from my real job and installed 3 inch drop coils up front, shock relocation kit in the back, double adjustable panhard bar, new shocks(front and back) and 5 inch drop coils in the back. Also checked and filled my rear diff. Took about 5 hours but was well worth it. I love the new stance. I will post up some pics this weekend.

ItsRandy · 02-11-2011, 01:02 AM

Found (bought) a right AND a left big block motor mount stands today. I got one (the left) from a Chevy dealer in Costa Mesa, California for $108.00 and the right from a Chevy dealer in North Carolina for $60.00. I feel blessed.
Posted via Mobile Device

02-07-2011, 11:52 PM	#1
darkolive71 Registered User Join Date: Jan 2011 Location: Cape Girardeau, MO Posts: 18	Re: What did you do to your truck today! I dropped driveshaft parts off to have a new one made. As soon as it gets done I can drive it for the first time as a 4x4. I bet it drives different than it did as a 2wd.

02-08-2011, 12:00 AM	#2
71AteLugger Registered User Join Date: Feb 2011 Location: Antioch, California Posts: 13	Re: What did you do to your truck today! I cut a hole in my door to match my donor 72 right door... Pioneer 6x9's coming soon. __________________ As for me and my Chevy, we serve the Lord. Joshua 24:16

02-08-2011, 12:20 AM	#3
MadDog 1970 GMC Join Date: Jul 2004 Location: Idaho Posts: 95	Re: What did you do to your truck today! installed the head light bezels on my 70 GMC, bolted the bed to the fram, and took the tailgate handle out of my old bed so i can get it painted to match the new tailgate.. __________________ MadDog's Website

02-08-2011, 12:52 AM	#4
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Sanded my frame. My finger tips are sore! Posted via Mobile Device

02-08-2011, 02:05 AM	#5
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! adjusted the pb panhard bar and threw a quick crappy paint job on my glove box door will redo it better later. and took a couple of pics of the clearance of the pb bar and brackets just perfect lol. and also took a pic of the part of the rear brake line that i can see from underneath.

02-08-2011, 04:10 AM	#6
BadaSs_Cal Registered User Join Date: Feb 2010 Location: Walnut Grove, Ca Posts: 216	Re: What did you do to your truck today! Starting to make my intake shiny. __________________ 66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED!:devil 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926

02-08-2011, 09:30 PM	#7
ramey 71' Custom 10 (ole blue) Join Date: Oct 2008 Location: Cleveland, GA Posts: 223	Re: What did you do to your truck today! stole a q-jet from my uncle today. he knew i was gettin it, he's got twenty layin around. gonna rebuild it tomorrow n put it on the 69, n ima take the holley off and throw it as far as i can! __________________ 71' Custom 10 (ole blue) GM Goodwrench 350 Turbo 350 Transmission

02-08-2011, 10:30 PM	#9
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: What did you do to your truck today! Removed the trailing arms off of my rear axle, luckily no issues. __________________ '69 Fleet It ain't yours, if you didn't build it!

02-08-2011, 10:42 PM	#10
glider_6969 Registered User Join Date: Jan 2010 Location: Ontario Posts: 400	Re: What did you do to your truck today! Tonight I installed my new overflow bottle that I picked up at an Auto zone for about $10 bucks with the bracket,for the radiator. I was debating on were to mount it. I think I found a good spot. I made a bracket that wraps around the battery and bolted it to the rad support, then mount the bottle bracket to it. Last edited by glider_6969; 02-08-2011 at 10:43 PM. Reason: added more

02-08-2011, 11:37 PM	#11
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Sanded my frame. Did I tell you my finger tips are sore? Posted via Mobile Device

02-08-2011, 11:42 PM	#12
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: What did you do to your truck today! started making my buddy bucket seat adjuster lever since when i bought my seat it was broken! so any one who wants to make on you will need : one 8'' or however long or short you want it rod 1/2 inch thick round stock rod and a grinder with a 80 grit sander to make it nice and smooth after you grind it down and a torch to bend it how ever you want and some bolts i am thinking a 3/8th or 5/16 th bolts and nuts

02-09-2011, 02:33 AM	#15
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! not a whole lot but i repainted my gauge bezels and started installing them in the cluster. now i need to buy the rest of the gauges so i can finish it, and also make/cut out a piece so i can install my gas gauge and turn signal lights in the cluster.

02-09-2011, 11:35 PM	#17
Keller Registered User Join Date: Sep 2009 Location: Nashville, TN Posts: 79	Re: What did you do to your truck today! I tracked down a ground issue and got it to start!

02-10-2011, 12:00 AM	#18
RickBost Registered User Join Date: Apr 2010 Location: Sumas WA Posts: 92	Re: What did you do to your truck today! I got the truck to run under its own power for the first time since i onwed it and now the tranny is bad. I am still trying to figure out if a t-10 will bolt to and use the clutch from the m-20? __________________ 72 GMC Jimmy 8" lift 38" super swampers 77 GMC C15 High Seirra Short Step lowered 6/8 http://67-72chevytrucks.com/vboard/s...53#post8999053 1972 Plymouth Roadrunner 2005 Cadillac Escalade 2014 Ram Ecodiesel

02-10-2011, 01:14 AM	#19
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: What did you do to your truck today! I picked up a set of Hummer H2 chrome rims and tires for $200... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE



Register or Log In To remove these advertisements.

02-10-2011, 01:50 AM	#20
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! i installed my sun visors back in the burb

02-10-2011, 02:04 AM	#21
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! I picked up a small soda blaster to finish cleaning my frame, it works real good and my fingers won't be sore anymore. Posted via Mobile Device

02-10-2011, 07:22 PM	#24
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: What did you do to your truck today! I took the day off from my real job and installed 3 inch drop coils up front, shock relocation kit in the back, double adjustable panhard bar, new shocks(front and back) and 5 inch drop coils in the back. Also checked and filled my rear diff. Took about 5 hours but was well worth it. I love the new stance. I will post up some pics this weekend. __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

02-11-2011, 01:02 AM	#25
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Found (bought) a right AND a left big block motor mount stands today. I got one (the left) from a Chevy dealer in Costa Mesa, California for $108.00 and the right from a Chevy dealer in North Carolina for $60.00. I feel blessed. Posted via Mobile Device

Register or Log In To remove these advertisements.