Donz '65 SWB Stepper Budget Build... - Page 64 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rusty76 · 07-07-2015, 04:15 PM

I do like that. Very nice. Very nice indeed.

step65 · 07-07-2015, 08:59 PM

The dash is cool. I like the 2 tone came out real nice.

**Palf70Step** · 07-08-2015, 06:54 AM

Those two colors go together sooooooo well! Great job Don.

Ta2Don · 07-08-2015, 09:29 AM

Quote:

Originally Posted by TJ's Chevy

Looking good brotha!

Quote:

Originally Posted by dwcardfan

Looking good. Moving right along!!!

Quote:

Originally Posted by rusty76

I do like that. Very nice. Very nice indeed.

Quote:

Originally Posted by step65

The dash is cool. I like the 2 tone came out real nice.

Quote:

Originally Posted by Palf70Step

Those two colors go together sooooooo well! Great job Don.

Thanks for checking in… and for the comments…

Although, at times, I feel like I need to hang a whiteboard to scrawl my ideas on...

Mostly due to the fact that occassionally I tend t come up with an idea, then later question the validity when I attempt to bring that idea to life...

Lesson Learned… A rendering BEFORE I start on my next project will be a MUST!

chad64chevy · 07-09-2015, 07:45 PM

looking real good don! you have got a lot done this summer that's for sure!!! how much peel and seal did you use? I bought another two rolls to do the floor, the firewall & back wall I already did awhile back! are you going to use the reflective insulation pad on the floor under the carpet also? I'm wanting my cab floor to be really insulated since my mufflers are right under the cab and exit in front of the rear tires

Ta2Don · 07-10-2015, 10:08 AM

Quote:

Originally Posted by chad64chevy

looking real good don! you have got a lot done this summer that's for sure!!! how much peel and seal did you use? I bought another two rolls to do the floor, the firewall & back wall I already did awhile back! are you going to use the reflective insulation pad on the floor under the carpet also? I'm wanting my cab floor to be really insulated since my mufflers are right under the cab and exit in front of the rear tires

Thanx Chad!

I used just over 2 rolls of the peel & seal… and that was just for the floor and up to just under the firewall pad… with the remainder of the 3rd roll I plan on doing the insides of the door panels… and later, when I relocate the fuel tank, I will do the back wall of the cab…

Sure hope you get to Clem's in October...

4mulaSvaliant · 07-10-2015, 10:53 AM

This is looking great Don! That "peel and seal" stuff. Is it the Home depot roof seal stuff? I used that stuff in my doors and just the removable panels being insulated made a huge difference! Nice color choice btw

Ta2Don · 07-10-2015, 12:48 PM

Quote:

Originally Posted by 4mulaSvaliant

This is looking great Don! That "peel and seal" stuff. Is it the Home depot roof seal stuff? I used that stuff in my doors and just the removable panels being insulated made a huge difference! Nice color choice btw

Thanks

I used the stuff from Lowes (It's local, Home Depot isn't)
Here's what I used…

IMG_3484 by Donald Olivo, on Flickr

Ta2Don · 07-10-2015, 03:36 PM

Stepped out to the shed this a.m. and used the remainder of the Peel & Seal on the interior of the door panels...

IMG_4276 by Donald Olivo, on Flickr

dwcardfan · 07-10-2015, 03:59 PM

Nice!!!!!

jlsanborn · 07-10-2015, 04:10 PM

Looking good Don! I went to the Lowes website looking for the P&S, read the reviews and they almost all about automotive applications

mjh1965 · 07-10-2015, 05:42 PM

Looking good Don . Should be a lot quieter in the truck when finished . Another job on my list of things to do

**Palf70Step** · 07-10-2015, 07:43 PM

I just did my 64 with the stuff Don. This is the second truck I have done with it and was always happy with the results. A lot quieter and it definitely made the floorboards cooler.

Grizz1963 · 07-11-2015, 01:38 AM

Quote:

Originally Posted by Ta2Don

Stepped out to the shed this a.m. and used the remainder of the Peel & Seal on the interior of the door panels...

IMG_4276 by Donald Olivo, on Flickr

Probably an even more sensible mod than floors, doors do rattle and resonate.

Grizz1963 · 07-11-2015, 05:10 AM

Another piece of the puzzle fitted today.

Martin and I went to the travel agency today to book our car.

Helped by Jesus...... It has to be a sign.

So headed to Don's place first, then on to Clem's or his shin dig.

Time is getting closer.

Ta2Don · 07-11-2015, 08:10 AM

Quote:

Originally Posted by Palf70Step

I just did my 64 with the stuff Don. This is the second truck I have done with it and was always happy with the results. A lot quieter and it definitely made the floorboards cooler.

Thanks for the review...

the '72 will be getting this treatment as well...

Quote:

Originally Posted by Grizz1963

Probably an even more sensible mod than floors, doors do rattle and resonate.

Quote:

Originally Posted by Grizz1963

Another piece of the puzzle fitted today.

Martin and I went to the travel agency today to book our car.

Helped by Jesus...... It has to be a sign.

So headed to Don's place first, then on to Clem's or his shin dig.

Time is getting closer.

TJ's Chevy · 07-11-2015, 10:41 AM

Man brotha...keep putting that stuff in and you won't even hear the engine straight piped!

lol Nice work! Outta be a nice ride.

**Palf70Step** · 07-11-2015, 06:22 PM

Quote:

Originally Posted by Ta2Don

Thanks for the review...

the '72 will be getting this treatment as well...

Not sure what you did on yours, but I put a double layer down for the floor and firewall areas.

chad64chevy · 07-11-2015, 08:51 PM

Quote:

Originally Posted by Ta2Don

Thanx Chad!

I used just over 2 rolls of the peel & seal… and that was just for the floor and up to just under the firewall pad… with the remainder of the 3rd roll I plan on doing the insides of the door panels… and later, when I relocate the fuel tank, I will do the back wall of the cab…

Sure hope you get to Clem's in October...

well don, I will be there this yr.! not so sure about the truck. an now that my wife is 12 weeks pregnant! an this new job has me out of town ALOT after tomorrow I will be in Kansas for two weeks working 15-18hrs. aday, truck time could be scares between now and the get-together! but everyone at work as known that I will be taking off that Saturday if not the whole weekend for the get-together!

Ta2Don · 07-12-2015, 09:35 AM

Quote:

Originally Posted by TJ's Chevy

Man brotha...keep putting that stuff in and you won't even hear the engine straight piped!

lol Nice work! Outta be a nice ride.

Thanx Brotha!

Quote:

Originally Posted by Palf70Step

Not sure what you did on yours, but I put a double layer down for the floor and firewall areas.

Single layer so far…

Quote:

Originally Posted by chad64chevy

well don, I will be there this yr.! not so sure about the truck. an now that my wife is 12 weeks pregnant! an this new job has me out of town ALOT after tomorrow I will be in Kansas for two weeks working 15-18hrs. aday, truck time could be scares between now and the get-together! but everyone at work as known that I will be taking off that Saturday if not the whole weekend for the get-together!

Congrats on the Baby!

Glad you are making Clem's this year, should be as fun as the last 2, if not more so.

Ta2Don · 07-12-2015, 10:55 PM

With the heat my motivation factor was only pointing to the pool...

I did however, mask off the steering wheel and dash and sprayed the interior color...

On to the pics…

IMG_4312 by Donald Olivo, on Flickr

IMG_4313 by Donald Olivo, on Flickr

IMG_4314 by Donald Olivo, on Flickr

These were taken after the first coat… will get updated pics tomorrow...

Here's a shot of the dash with the heater switch panel in place...

IMG_4298 by Donald Olivo, on Flickr

Till next time...

TJ's Chevy · 07-13-2015, 12:29 AM

Awesome brotha! Got my a-arms and front suspension pretty much done today. Pictures Monday.

Ta2Don · 07-13-2015, 10:16 AM

Quote:

Originally Posted by TJ's Chevy

Awesome brotha! Got my a-arms and front suspension pretty much done today. Pictures Monday.

**Palf70Step** · 07-13-2015, 10:54 AM

Love the look of that dash!

The truck is coming together nicely.

markeb01 · 07-13-2015, 11:48 AM

Man that looks nice!

07-07-2015, 04:15 PM	#1576
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: Donz '65 SWB Stepper Budget Build... I do like that. Very nice. Very nice indeed. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

07-07-2015, 08:59 PM	#1577
step65 Registered User Join Date: Aug 2013 Location: Wildomar Ca Posts: 274	Re: Donz '65 SWB Stepper Budget Build... The dash is cool. I like the 2 tone came out real nice.

07-08-2015, 06:54 AM	#1578
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Donz '65 SWB Stepper Budget Build... Those two colors go together sooooooo well! Great job Don. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-09-2015, 07:45 PM	#1580
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: Donz '65 SWB Stepper Budget Build... looking real good don! you have got a lot done this summer that's for sure!!! how much peel and seal did you use? I bought another two rolls to do the floor, the firewall & back wall I already did awhile back! are you going to use the reflective insulation pad on the floor under the carpet also? I'm wanting my cab floor to be really insulated since my mufflers are right under the cab and exit in front of the rear tires __________________ my project: http://67-72chevytrucks.com/vboard/s...d.php?t=456163

07-10-2015, 10:53 AM	#1582
4mulaSvaliant Registered User Join Date: Oct 2014 Location: VIRGINIA BEACH Posts: 140	Re: Donz '65 SWB Stepper Budget Build... This is looking great Don! That "peel and seal" stuff. Is it the Home depot roof seal stuff? I used that stuff in my doors and just the removable panels being insulated made a huge difference! Nice color choice btw __________________ 64 LWB to SWB Step build. Daily driven! http://67-72chevytrucks.com/vboard/s...d.php?t=647168

07-10-2015, 03:36 PM	#1584
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Donz '65 SWB Stepper Budget Build... Stepped out to the shed this a.m. and used the remainder of the Peel & Seal on the interior of the door panels... IMG_4276 by Donald Olivo, on Flickr __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

07-10-2015, 03:59 PM	#1585
dwcardfan Registered User Join Date: Sep 2013 Location: Strawberry Arkansas Posts: 1,137	Re: Donz '65 SWB Stepper Budget Build... Nice!!!!! __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=605217

07-10-2015, 04:10 PM	#1586
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: Donz '65 SWB Stepper Budget Build... Looking good Don! I went to the Lowes website looking for the P&S, read the reviews and they almost all about automotive applications __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

07-10-2015, 05:42 PM	#1587
mjh1965 Registered User Join Date: Sep 2013 Location: Kent England Posts: 1,025	Re: Donz '65 SWB Stepper Budget Build... Looking good Don . Should be a lot quieter in the truck when finished . Another job on my list of things to do __________________ FINALLY PUTTING IT BACK TOGETHER AT LONG LAST MY BUILD THREAD: http://67-72chevytrucks.com/vboard/s...d.php?t=611614

07-10-2015, 07:43 PM	#1588
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Donz '65 SWB Stepper Budget Build... I just did my 64 with the stuff Don. This is the second truck I have done with it and was always happy with the results. A lot quieter and it definitely made the floorboards cooler. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

07-11-2015, 05:10 AM	#1590
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,572	Re: Donz '65 SWB Stepper Budget Build... Another piece of the puzzle fitted today. Martin and I went to the travel agency today to book our car. Helped by Jesus...... It has to be a sign. So headed to Don's place first, then on to Clem's or his shin dig. Time is getting closer. __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.

07-11-2015, 10:41 AM	#1592
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Donz '65 SWB Stepper Budget Build... Man brotha...keep putting that stuff in and you won't even hear the engine straight piped! lol Nice work! Outta be a nice ride. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

07-12-2015, 10:55 PM	#1596
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: Donz '65 SWB Stepper Budget Build... With the heat my motivation factor was only pointing to the pool... I did however, mask off the steering wheel and dash and sprayed the interior color... On to the pics… IMG_4312 by Donald Olivo, on Flickr IMG_4313 by Donald Olivo, on Flickr IMG_4314 by Donald Olivo, on Flickr These were taken after the first coat… will get updated pics tomorrow... Here's a shot of the dash with the heater switch panel in place... IMG_4298 by Donald Olivo, on Flickr Till next time... __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

07-13-2015, 12:29 AM	#1597
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Donz '65 SWB Stepper Budget Build... Awesome brotha! Got my a-arms and front suspension pretty much done today. Pictures Monday. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

07-13-2015, 10:54 AM	#1599
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Donz '65 SWB Stepper Budget Build... Love the look of that dash! The truck is coming together nicely. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

07-13-2015, 11:48 AM	#1600
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Donz '65 SWB Stepper Budget Build... Man that looks nice! __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

Register or Log In To remove these advertisements.