Daverods project 66 - Page 65 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

daverod · 03-29-2011, 11:10 PM

not yet worked on my 52. maybe this weekend. I'm hoping if I trim the metal I'll be able to get them off. Now I know why some people have fancy dump beds.

daverod · 04-10-2011, 12:37 AM

Did a lot of head scratching. Somthing so easy for some.

I don't things don't line up right? Maybe the wrong pulley on the crank? Does the belt for the steering pump go around the crank?

bubba327 · 04-10-2011, 12:51 AM

Looks like your PS pump could be farther back to line up better with the back pulley on the crank . How does the alternator line up??
mine has the belt on the crank back slot , water pump and the PS pump. The alternator drives from the front slot on the crank and the front slot on the water pump.
Use a straight edge or a wood board to line things up. I will clamp a board to a pulley if I am fabbing up brackets and want to stay in alignment.

daverod · 04-10-2011, 12:59 AM

Its back as far as it goes.Alt. lines up with front grove. The power steering pump has a rear bracket that mounts to the motor mount. It's were it needs to be.??? More head scratching.

**Captainfab** · 04-10-2011, 01:04 AM

The problem is that you have a power steering pump and brackets for the shor water pump. Your engine has the long water pump, and the alternator is of course in position for the long water pump. You'll need to get a PS pump for a long water pump application....'73 and up truck, or '69 and up car. With the long water pump, the PS pump hangs from the water pump from that boss below the lower bolt. Then there are brackets that bolt to the front of the head, and over to the front header bolt. There are some variations to that, but that is the basics. Probably best if you could get everything from a donor vehicle.

daverod · 04-10-2011, 01:11 AM

I also have this pump but I couldn't figure out how to hang it. I had two different engines and things kinda got mixed up. I'll try again in the morning. Hope you have some of those brackets made Capt time gettin closer.

bubba327 · 04-10-2011, 01:13 AM

Quote:

Originally Posted by daverod

I also have this pump but I couldn't figure out how to hang it.

Bungee cord???

daverod · 04-10-2011, 01:15 AM

Least now I kinda know the problem. I work better with pictures.

padresag · 04-10-2011, 05:10 PM

I didn't read all the replies before I answered .you already had the answer
ron

allaboutchevelles · 04-10-2011, 06:59 PM

Hey Dave, I had the same problem when lining up my pulleys. I went to an old junk yard and took all the pulleys off a 283 truck that looked origional and got home and they didnt line up on my motor. I bought some shims off ebay to set the crank pulleys out about 1/8 inch and then eveything lined up perfect. I can get you some pics if you want.

hotroddr · 04-10-2011, 07:22 PM

Ran outside and snapped a picture for you. Here is how your long water pump power steering pump should mount.

daverod · 04-10-2011, 10:10 PM

You are the man.

Just when I was all depressed. I pulled everything apart and had things everywhere.

Guess I'll have to keep better track of parts. Here I thought a 350 was a 350. da

Looks like I need to find that little mounting bracket. Thanks Bud.

daverod · 04-12-2011, 09:42 PM

10 boxes an a hour later. wola

thanks guys puts me that much closer.

bubba327 · 04-12-2011, 11:45 PM

Name: IMG_2796.jpg
Views: 555
Size: 43.3 KB

lookey what was at the swap meet at Firebird

Name: IMG_2797.jpg
Views: 551
Size: 34.5 KB

With an Impala dash no less !!
Dave--- you are not gonna have the only one!!!!!!!!!!!!!!
The chop top did not impress me at all,I am too tall and a low roof to hit my head on would just P^;SS me off.

daverod · 04-12-2011, 11:50 PM

Another unfinished project.

Down with chops.

Must be nice to live in a real town.

bubba327 · 04-12-2011, 11:58 PM

Quote:

Originally Posted by daverod

Another unfinished project.

Down with chops.

Must be nice to live in a real town.

We are gonna have to go to Portland swap meet someday.
My uncle spent two days there and did not see it all.
He said he was not looking at every booth either . It is supposed to be Huge!!

daverod · 04-13-2011, 12:04 AM

When is that?

**Captainfab** · 04-13-2011, 01:45 AM

It was a couple of weeks ago. I think they still have one in the Fall, but I don't think it is as big as the one in the Spring.

Quote:

Originally Posted by daverod

When is that?

**Captainfab** · 04-13-2011, 01:47 AM

I think that truck belongs to a member here.....can't remember his name ATM.

Quote:

Originally Posted by bubba327

Attachment 731974
lookey what was at the swap meet at Firebird

Attachment 731975
With an Impala dash no less !!
Dave--- you are not gonna have the only one!!!!!!!!!!!!!!
The chop top did not impress me at all,I am too tall and a low roof to hit my head on would just P^;SS me off.

Strodder · 04-13-2011, 03:49 PM

You guys forgot about Allan. He has a 59 dash also.

daverod · 04-13-2011, 04:19 PM

Allan?

He's still workin on that truck? I've seen a few with that dash. Guy with a 50's truck even has one. I was gettin an idea. Then I said no. The 52 is on the fast track.Well, fast for me.

Strodder · 04-13-2011, 10:11 PM

I have an extra gauge console for a 57 Chevy Belair. I wonder if I could make it work in my 65 dash. Do ya think it can be done.?

bubba327 · 04-12-2011, 11:54 PM

Swap meets are where unfinished projects are passed on to others.
Who just might not finish them either!!

ruffrida2005 · 04-13-2011, 10:32 PM

You need to have a little spacer between the head and mount. There is a metal peice that goes between the exhaust flange and the mount.

For like $50 you can get a new mount off summit that's a lot better.

daverod · 04-13-2011, 10:34 PM

Quote:

Originally Posted by ruffrida2005

You need to have a little spacer between the head and mount. There is a metal peice that goes between the exhaust flange and the mount.

For like $50 you can get a new mount off summit that's a lot better.

Where? Show me the money.

03-29-2011, 11:10 PM	#1
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 not yet worked on my 52. maybe this weekend. I'm hoping if I trim the metal I'll be able to get them off. Now I know why some people have fancy dump beds. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-10-2011, 12:37 AM	#2
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Did a lot of head scratching. Somthing so easy for some. I don't things don't line up right? Maybe the wrong pulley on the crank? Does the belt for the steering pump go around the crank? Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-10-2011 at 12:43 AM.

04-10-2011, 12:51 AM	#3
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Looks like your PS pump could be farther back to line up better with the back pulley on the crank . How does the alternator line up?? mine has the belt on the crank back slot , water pump and the PS pump. The alternator drives from the front slot on the crank and the front slot on the water pump. Use a straight edge or a wood board to line things up. I will clamp a board to a pulley if I am fabbing up brackets and want to stay in alignment. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" Last edited by bubba327; 04-10-2011 at 12:56 AM. Reason: added text

04-10-2011, 12:59 AM	#4
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Its back as far as it goes.Alt. lines up with front grove. The power steering pump has a rear bracket that mounts to the motor mount. It's were it needs to be.??? More head scratching. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-10-2011 at 01:05 AM.

04-10-2011, 01:04 AM	#5
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: Daverods project 66 The problem is that you have a power steering pump and brackets for the shor water pump. Your engine has the long water pump, and the alternator is of course in position for the long water pump. You'll need to get a PS pump for a long water pump application....'73 and up truck, or '69 and up car. With the long water pump, the PS pump hangs from the water pump from that boss below the lower bolt. Then there are brackets that bolt to the front of the head, and over to the front header bolt. There are some variations to that, but that is the basics. Probably best if you could get everything from a donor vehicle. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE Last edited by Captainfab; 04-10-2011 at 01:05 AM.

04-10-2011, 01:11 AM	#6
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 I also have this pump but I couldn't figure out how to hang it. I had two different engines and things kinda got mixed up. I'll try again in the morning. Hope you have some of those brackets made Capt time gettin closer. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-10-2011 at 01:14 AM.

04-10-2011, 01:15 AM	#8
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Least now I kinda know the problem. I work better with pictures. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-10-2011 at 01:30 AM.

04-10-2011, 05:10 PM	#9
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Daverods project 66 I didn't read all the replies before I answered .you already had the answer ron Last edited by padresag; 04-10-2011 at 05:15 PM.

04-10-2011, 06:59 PM	#10
allaboutchevelles Registered User Join Date: Dec 2010 Location: sanford nc Posts: 499	Re: Daverods project 66 Hey Dave, I had the same problem when lining up my pulleys. I went to an old junk yard and took all the pulleys off a 283 truck that looked origional and got home and they didnt line up on my motor. I bought some shims off ebay to set the crank pulleys out about 1/8 inch and then eveything lined up perfect. I can get you some pics if you want. __________________ 69 chevelle malibu, 64 C-10 shortbed

04-10-2011, 07:22 PM	#11
hotroddr Registered User Join Date: Mar 2011 Location: Mesa, AZ Posts: 26	Re: Daverods project 66 Ran outside and snapped a picture for you. Here is how your long water pump power steering pump should mount. __________________ 1968 Firebird 1966 Suburban

04-10-2011, 10:10 PM	#12
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 You are the man. Just when I was all depressed. I pulled everything apart and had things everywhere. Guess I'll have to keep better track of parts. Here I thought a 350 was a 350. da Looks like I need to find that little mounting bracket. Thanks Bud. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-10-2011 at 10:18 PM.

04-12-2011, 09:42 PM	#13
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 10 boxes an a hour later. wola thanks guys puts me that much closer. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

04-12-2011, 11:45 PM	#14
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 lookey what was at the swap meet at Firebird With an Impala dash no less !! Dave--- you are not gonna have the only one!!!!!!!!!!!!!! The chop top did not impress me at all,I am too tall and a low roof to hit my head on would just P^;SS me off. __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project" Last edited by bubba327; 04-12-2011 at 11:47 PM.

04-12-2011, 11:50 PM	#15
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Another unfinished project. Down with chops. Must be nice to live in a real town. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-12-2011 at 11:51 PM.

04-13-2011, 12:04 AM	#17
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 When is that? __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"



Register or Log In To remove these advertisements.

04-13-2011, 03:49 PM	#20
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 You guys forgot about Allan. He has a 59 dash also. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-13-2011, 04:19 PM	#21
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Allan? He's still workin on that truck? I've seen a few with that dash. Guy with a 50's truck even has one. I was gettin an idea. Then I said no. The 52 is on the fast track.Well, fast for me. Attached Images __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it" Last edited by daverod; 04-13-2011 at 10:32 PM.

04-13-2011, 10:11 PM	#22
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 I have an extra gauge console for a 57 Chevy Belair. I wonder if I could make it work in my 65 dash. Do ya think it can be done.? __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-12-2011, 11:54 PM	#23
bubba327 HOW long until spring?? Join Date: Mar 2009 Location: Star Idaho Posts: 1,413	Re: Daverods project 66 Swap meets are where unfinished projects are passed on to others. Who just might not finish them either!! __________________ 69 chevelle convertible 71-C-10 short-wide and low 64 C-10 custom shortbox "Bubba"s Recycling project"

04-13-2011, 10:32 PM	#24
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Daverods project 66 You need to have a little spacer between the head and mount. There is a metal peice that goes between the exhaust flange and the mount. For like $50 you can get a new mount off summit that's a lot better. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

Register or Log In To remove these advertisements.