** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

noonzor · 09-01-2011, 07:26 PM

jeez, my first car was a 1990 chevy corsica. if i had a dollar for everytime i fixed that thing in canadian tire's parking lot i coulda bought a better car! haha.

**LEEVON** · 09-02-2011, 12:35 AM

Do you have any openings in your family? I have great references.

jb1016 · 09-02-2011, 09:04 PM

Very nice jeep -- looks awesome for a side project. But then, you do some awesome work.

drewskiren · 09-04-2011, 06:50 PM

I didn't get to post these last night, but I have now cavity waxed all of the rocker innards. It is an Eastwood product that you just hose everywhere you can that may or may not have any paint. The hard to reach wand is the best because you can snake it anywhere and the tip makes it squirt forward and out the sides in a 360 degree pattern. I ran it up in the factory hole on the front of the rockers and drilled a couple of holes in the rear most areas of the inner rockers. I hosed it up, down, and all around and had the wax pouring out all the drain holes. It will firm up in a day, but still be somewhat flexible.

drewskiren · 09-05-2011, 06:48 PM

Quote:

Originally Posted by Ridnhi

I just finished reading your thread. Took me three evenings, but totally worth it. I love your willingness to jump into your project. I find myself intimidated by things on my blazer but after seeing your project, it gives me a huge boost. Thanks for the inspiration. Good luck on the truck! I'll be watching.
Posted via Mobile Device

Thanks for taking the time to read it all, I know I read all of the other builds before I was inspired to tackle mine. Its the circle of life, man.

68 TT · 09-06-2011, 11:03 AM

Quote:

Originally Posted by drewskiren

I didn't get to post these last night, but I have now cavity waxed all of the rocker innards. It is an Eastwood product that you just hose everywhere you can that may or may not have any paint. The hard to reach wand is the best because you can snake it anywhere and the tip makes it squirt forward and out the sides in a 360 degree pattern. I ran it up in the factory hole on the front of the rockers and drilled a couple of holes in the rear most areas of the inner rockers. I hosed it up, down, and all around and had the wax pouring out all the drain holes. It will firm up in a day, but still be somewhat flexible.

Good idea. Too bad they didn't do something like that when they were new.

drewskiren · 09-07-2011, 09:45 AM

I thought I was about ready to paint the cab, but we had a missionary family show up yesterday and it will be too toxic for them upstairs. I'll have to wait til they leave Monday.

turbostang7 · 09-07-2011, 01:05 PM

wow, read this whole thread and all i can say is it is amazing! awesome work! kinda wanted to make a crew cab out of my 64 but after seeing this i don't have the patience to do it haha so i will just stick with my 02 crew for now. looks awesome though!

inovermyhead · 09-07-2011, 02:10 PM

I too just stumbled on this side of the board and found this build. Awesome work and can't wait to see more work done then the finished product.

ERASER5 · 09-07-2011, 06:55 PM

Quote:

Originally Posted by drewskiren

I thought I was about ready to paint the cab, but we had a missionary family show up yesterday and it will be too toxic for them upstairs. I'll have to wait til they leave Monday.

You're going to spoil them.

drewskiren · 09-13-2011, 08:18 PM

One set of missionaries leaves and another one is ready to show up this Saturday!!! Quick, you have 3 days to paint the cab. Go, Go, Go!

**Dieselwrencher** · 09-13-2011, 08:30 PM

Man it looks good and I can tell it's itching for paint!

drewskiren · 09-13-2011, 11:11 PM

One day down, still on schedule! I'll flip this door over tomorrow, tape off the white areas, and paint it with the cab that is prepped and waiting. If that all goes well and the creek don't rise, the next day I can unmask and remask for the white areas and shoot them all before Friday. Friday is already totally booked with work and Friday night football - Go Bubby!!

VA72C10 · 09-14-2011, 12:43 AM

Looking good! Nice to see some color going on!

Pop's C-10 · 09-14-2011, 09:54 AM

looking good man..we are having good painting weather here lately..lol

68 TT · 09-14-2011, 11:18 AM

Good luck. Hope the paint comes out the way you want it.

jeffg1010 · 09-14-2011, 08:45 PM

Quote:

Originally Posted by drewskiren

One day down, still on schedule! I'll flip this door over tomorrow, tape off the white areas, and paint it with the cab that is prepped and waiting. If that all goes well and the creek don't rise, the next day I can unmask and remask for the white areas and shoot them all before Friday. Friday is already totally booked with work and Friday night football - Go Bubby!!

Man, it's gonna be SWEEEET!

drewskiren · 09-14-2011, 09:42 PM

Day 2 and still kinda sorta on schedule. Blue is on, but runs on the drivers rocker and a few specks of trash on the door. I think if I let it dry overnight I could wet-sand in the morning and hit it with one quick pass. Then maybe by tomorrow night I could un-tape and re-tape like planned for the white spray.

VA72C10 · 09-14-2011, 09:45 PM

Looking good! Is there some reason why you didn't spray white where it generally would be and then tape off like it is taped off now? Just seems like it would be less taping and less to cover/faster doing it that way...but I've never dealt with two tone so I dunno

drewskiren · 09-14-2011, 09:50 PM

Quote:

Originally Posted by VA72C10

Looking good! Is there some reason why you didn't spray white where it generally would be and then tape off like it is taped off now? Just seems like it would be less taping and less to cover/faster doing it that way...but I've never dealt with two tone so I dunno

Either one you paint first doesn't really matter. I could have not bothered with taping up the primer where the other color goes, but then I would have had to wet-sand all those areas again to slick them up for the second color paint. I was about to do that out of laziness until my smart helper Gnande advised me that no more sanding would be needed if I covered it up twice. Does that make sense? I will hit the tape line with 600 very carefully to have less of an edge when I un-tape this first go round

VA72C10 · 09-14-2011, 09:56 PM

Gotcha...just thinking you have a lot more to tape off now than if you did it the opposite way

1985-GMC · 09-14-2011, 11:54 PM

It looks awesome!!!! What kind of paint is that?

drewskiren · 09-15-2011, 01:30 PM

OK, I got out the runs and trash and re-shot it and it looks great! I just hope it dries quick enough for tonight's painting plan.

Paint cans are pictured way back in the blog, but it is just single stage Nason brand.

**67cheby** · 09-15-2011, 05:26 PM

Looking great !

FRENCHBLUE72 · 09-15-2011, 07:15 PM

Looks damn good keep up the great work..

09-01-2011, 07:26 PM	#1626
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. jeez, my first car was a 1990 chevy corsica. if i had a dollar for everytime i fixed that thing in canadian tire's parking lot i coulda bought a better car! haha. __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

09-02-2011, 12:35 AM	#1627
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Do you have any openings in your family? I have great references. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

09-04-2011, 06:50 PM	#1629
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I didn't get to post these last night, but I have now cavity waxed all of the rocker innards. It is an Eastwood product that you just hose everywhere you can that may or may not have any paint. The hard to reach wand is the best because you can snake it anywhere and the tip makes it squirt forward and out the sides in a 360 degree pattern. I ran it up in the factory hole on the front of the rockers and drilled a couple of holes in the rear most areas of the inner rockers. I hosed it up, down, and all around and had the wax pouring out all the drain holes. It will firm up in a day, but still be somewhat flexible. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

09-07-2011, 09:45 AM	#1632
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I thought I was about ready to paint the cab, but we had a missionary family show up yesterday and it will be too toxic for them upstairs. I'll have to wait til they leave Monday. __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

09-07-2011, 01:05 PM	#1633
turbostang7 Registered User Join Date: Aug 2011 Location: rexburg, Idaho Posts: 28	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. wow, read this whole thread and all i can say is it is amazing! awesome work! kinda wanted to make a crew cab out of my 64 but after seeing this i don't have the patience to do it haha so i will just stick with my 02 crew for now. looks awesome though!

09-07-2011, 02:10 PM	#1634
inovermyhead Registered User Join Date: May 2010 Location: Shreveport, LA Posts: 115	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I too just stumbled on this side of the board and found this build. Awesome work and can't wait to see more work done then the finished product. __________________ 81 GMC C15 RC SWB 5.3L 4L80E project

09-13-2011, 08:18 PM	#1636
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. One set of missionaries leaves and another one is ready to show up this Saturday!!! Quick, you have 3 days to paint the cab. Go, Go, Go! Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

09-13-2011, 08:30 PM	#1637
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Man it looks good and I can tell it's itching for paint! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-13-2011, 11:11 PM	#1638
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. One day down, still on schedule! I'll flip this door over tomorrow, tape off the white areas, and paint it with the cab that is prepped and waiting. If that all goes well and the creek don't rise, the next day I can unmask and remask for the white areas and shoot them all before Friday. Friday is already totally booked with work and Friday night football - Go Bubby!! Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 09-13-2011 at 11:28 PM.

09-14-2011, 12:43 AM	#1639
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking good! Nice to see some color going on! __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-14-2011, 09:54 AM	#1640
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. looking good man..we are having good painting weather here lately..lol __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

09-14-2011, 11:18 AM	#1641
68 TT Still plays with trucks Join Date: Jul 2009 Location: Spokane, WA Posts: 3,556	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Good luck. Hope the paint comes out the way you want it. __________________ miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars

09-14-2011, 09:42 PM	#1643
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Day 2 and still kinda sorta on schedule. Blue is on, but runs on the drivers rocker and a few specks of trash on the door. I think if I let it dry overnight I could wet-sand in the morning and hit it with one quick pass. Then maybe by tomorrow night I could un-tape and re-tape like planned for the white spray. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

09-14-2011, 09:45 PM	#1644
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking good! Is there some reason why you didn't spray white where it generally would be and then tape off like it is taped off now? Just seems like it would be less taping and less to cover/faster doing it that way...but I've never dealt with two tone so I dunno __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-14-2011, 09:56 PM	#1646
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Gotcha...just thinking you have a lot more to tape off now than if you did it the opposite way __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

09-14-2011, 11:54 PM	#1647
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. It looks awesome!!!! What kind of paint is that? __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

09-15-2011, 01:30 PM	#1648
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. OK, I got out the runs and trash and re-shot it and it looks great! I just hope it dries quick enough for tonight's painting plan. Paint cans are pictured way back in the blog, but it is just single stage Nason brand. __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

09-15-2011, 05:26 PM	#1649
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking great ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-15-2011, 07:15 PM	#1650
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks damn good keep up the great work.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.