What did you do to your truck today.The 3rd chapter - Page 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Super** · 03-07-2021, 08:33 PM

Quote:

Originally Posted by Barnfind46

Hey Rich, nice to see that your daughter likes your truck! A lot of young folks couldn't care less.

X2 very cool

**Ol Blue K20** · 03-07-2021, 08:51 PM

Quote:

Originally Posted by 72 Super

X2 very cool

X3, I wish my kids cared. Better yet, I wish they acted human.....

Andy4639 · 03-09-2021, 09:02 PM

I ordered some single E trac clips and straps to mount on the Ramp truck for tying down small stuff like bikes & golf carts. I used 3/8" grade 8 bolts threaded into the top of the bed.

Rich72C10 · 03-07-2021, 02:53 PM

My daughter wanted some photos today with the truck

Rich72C10 · 03-07-2021, 11:12 PM

Thanks guys!

She loves old cars and wants an old truck, like a 40s / 50s that has fenders and running boards. But her mom said No!

She is always driving my brothers old Model A cars and trucks when we are at his place in East Texas. She loved that V8 and for the record she is driving it!

She has grown up with them all her life. Well, so did I for that manner. My Dad had a 1930 Ford Coup, but the bug bit my brother real bad. It is what he does for a living working on these old Fords.

While these are Fords (sorry), we have great times in them. Personally, I don't care about the make, a great car is, well a great car!

Rich72C10 · 03-08-2021, 12:11 AM

@allchevy58 I do love that blue, fabulous color scheme!

**allchevy58** · 03-08-2021, 10:26 PM

Quote:

Originally Posted by Rich72C10

@allchevy58 I do love that blue, fabulous color scheme!

Thanks Richard, just going back to what it looked like off the showroom floor.

Sam1968 PNW · 03-08-2021, 08:20 PM

I just started a few weeks ago but today I installed 1 deville tail light housing. I fabbed the housings from my cut down bedside scraps! I’m terrible about figuring out how to add pics btw!

**zicc1835** · 03-08-2021, 09:09 PM

Quote:

Originally Posted by Sam1968 PNW

I just started a few weeks ago but today I installed 1 deville tail light housing. I fabbed the housings from my cut down bedside scraps! I’m terrible about figuring out how to add pics btw!

they look cool you reminded me I have a set that Im not using

...like this?

**pjmoreland** · 03-09-2021, 07:57 PM

Getting closer!

Stover93 · 03-09-2021, 08:41 PM

1st trip up the road pretty much assembled . New motor, trans,rear end, steering box, paint. Wish those hood hinges would show up tho! Ran great in any case!

Stover93 · 03-09-2021, 08:51 PM

Quote:

Originally Posted by pjmoreland

Getting closer!

Looks like the ol Omaha orange isn’t as original or unique as I thought it would be.

**pjmoreland** · 03-09-2021, 08:53 PM

Quote:

Originally Posted by Stover93

Looks like the ol Omaha orange isn’t as original or unique as I thought it would be.

Your truck looks great! I really like that color.

Stover93 · 03-09-2021, 08:55 PM

Quote:

Originally Posted by pjmoreland

Your truck looks great! I really like that color.

Thanks. Is yours the same color? It’s hard to tell from your pic.

**pjmoreland** · 03-09-2021, 08:57 PM

It is 516 Tangier orange, although it was painted 15-20 years ago and has darkened quite a bit. The paint is significantly lighter underneath the trim

v8truckin · 03-09-2021, 08:59 PM

Finally got that leak today!!!! Been chasing a header leak for the past 4 months. Went through 6 sets of gaskets all types aluminum, paper, dbld up, copper, and I kept having the same issue of exhaust coming out the top of the head ports of all ports. My heads are oval and headers are oval...so I thought...? Finally went with some round Cometic graphite metal and they solved the problem ��. I was at a loss of what to do beside buy new headers. Recommend these now to anyone! Also copper leaked like a siv. ��*♂️

**pjmoreland** · 03-11-2021, 11:57 AM

Got most of my parts back from the body shop yesterday so I started assembly. Removed the old bed fender, installed the bed steps, installed gravel shields, and sprayed undercoating on the replacement fender. Also drilled out the carriage bolts a PO used on the bed fenders and installed stock style screws.

**Ol Blue K20** · 03-11-2021, 12:04 PM

Looking good!

Sam1968 PNW · 03-11-2021, 01:53 PM

Got my bedsides ready for blast n paint!

ChevyGuyNC · 03-13-2021, 10:03 PM

Got the old girl purring today, thanks to my new friend Eddie. We discovered the timing way off, too far advanced. Back to a factory 8 degrees, and she really smoothed out. Then getting the dwell back to 30, and some carb adjustment. Wow what a difference.

Also found that the mufflers are shot, broken inside and rattling loudly... so off to the muffler shop ASAFP.

Also reconnected the cig lighter, and the AM radio antenna cable. Guess what, the 50 year old stock AM still works!

Got the hood adjusted so it doesn't stick up by the cowl too. So no new hinges needed.

NoStopN · 03-13-2021, 10:44 PM

Yeah ChevyGuy, these radios still work easily. I have the problem of the speaker not being hooked up right by a previous owner.

**pjmoreland** · 03-14-2021, 07:47 PM

Installed bed fender and grille. Will be picking up driver door from the body shop on Monday.

**Ol Blue K20** · 03-14-2021, 07:53 PM

What ya doing with the drivers fender?

**pjmoreland** · 03-14-2021, 08:00 PM

That primer one I've got on there is temporary. I got the original one repaired and painted, but I'm going to install it after I install the door since the hinge bolts are a pain to access with the fender in place. I was planning on installing the grille at that same time, but I got impatient.

**Ol Blue K20** · 03-14-2021, 09:52 PM

Quote:

Originally Posted by pjmoreland

That primer one I've got on there is temporary. I got the original one repaired and painted, but I'm going to install it after I install the door since the hinge bolts are a pain to access with the fender in place. I was planning on installing the grille at that same time, but I got impatient.

Aww, now I understand..

03-09-2021, 09:02 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: What did you do to your truck today.The 3rd chapter I ordered some single E trac clips and straps to mount on the Ramp truck for tying down small stuff like bikes & golf carts. I used 3/8" grade 8 bolts threaded into the top of the bed. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-07-2021, 02:53 PM	#4
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter My daughter wanted some photos today with the truck Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

03-07-2021, 11:12 PM	#5
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter Thanks guys! She loves old cars and wants an old truck, like a 40s / 50s that has fenders and running boards. But her mom said No! She is always driving my brothers old Model A cars and trucks when we are at his place in East Texas. She loved that V8 and for the record she is driving it! She has grown up with them all her life. Well, so did I for that manner. My Dad had a 1930 Ford Coup, but the bug bit my brother real bad. It is what he does for a living working on these old Fords. While these are Fords (sorry), we have great times in them. Personally, I don't care about the make, a great car is, well a great car! Attached Images __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

03-08-2021, 12:11 AM	#6
Rich72C10 Mr. Cheyenne Join Date: Jun 2020 Location: Kyle, Texas Posts: 1,687	Re: What did you do to your truck today.The 3rd chapter @allchevy58 I do love that blue, fabulous color scheme! __________________ Richard *'72 Chevy C10 Cheyenne Super WHT/MED BRONZE/WHT SBC 350 \| TH350 \| LWB \| AC \| Buddy Seats Upgrades:** Tilt \| Front Sway Bar \| Radio \| Sliding Window \| Bed Spare w/Lock Bed Rails \| Full LEDs \| Courtesy Lights \| Tachometer \| Glovebox Lock & Light \| Head Light Relays \| *Upgraded Fully Super Trim

03-08-2021, 08:20 PM	#8
Sam1968 PNW Registered User Join Date: Feb 2021 Location: Port Orchard, Wa Posts: 14	Re: What did you do to your truck today.The 3rd chapter I just started a few weeks ago but today I installed 1 deville tail light housing. I fabbed the housings from my cut down bedside scraps! I’m terrible about figuring out how to add pics btw! __________________ -1968 C20 Conversion Under Construction -Son Of A 22 Yr Retired USN E-8/Housewife -Father of 2, Partner To My Love -23 Yr Ship Repair Welder/Fabricator -PNW LMB Kayak Fisherman ”IT IS WHAT IT IS, AINT NOTHIN TO IT BUT TO DO IT SON”

03-09-2021, 07:57 PM	#10
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,785	Re: What did you do to your truck today.The 3rd chapter Getting closer! Attached Images

03-09-2021, 08:41 PM	#11
Stover93 Registered User Join Date: Jun 2019 Location: Shawnee, KS Posts: 127	Re: What did you do to your truck today.The 3rd chapter 1st trip up the road pretty much assembled . New motor, trans,rear end, steering box, paint. Wish those hood hinges would show up tho! Ran great in any case! Attached Images

03-09-2021, 08:57 PM	#15
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,785	Re: What did you do to your truck today.The 3rd chapter It is 516 Tangier orange, although it was painted 15-20 years ago and has darkened quite a bit. The paint is significantly lighter underneath the trim

03-09-2021, 08:59 PM	#16
v8truckin Registered User Join Date: Oct 2020 Location: California Posts: 21	Re: What did you do to your truck today.The 3rd chapter Finally got that leak today!!!! Been chasing a header leak for the past 4 months. Went through 6 sets of gaskets all types aluminum, paper, dbld up, copper, and I kept having the same issue of exhaust coming out the top of the head ports of all ports. My heads are oval and headers are oval...so I thought...? Finally went with some round Cometic graphite metal and they solved the problem ��. I was at a loss of what to do beside buy new headers. Recommend these now to anyone! Also copper leaked like a siv. ��*♂️ Attached Images

03-11-2021, 11:57 AM	#17
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,785	Re: What did you do to your truck today.The 3rd chapter Got most of my parts back from the body shop yesterday so I started assembly. Removed the old bed fender, installed the bed steps, installed gravel shields, and sprayed undercoating on the replacement fender. Also drilled out the carriage bolts a PO used on the bed fenders and installed stock style screws. Attached Images

03-11-2021, 12:04 PM	#18
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: What did you do to your truck today.The 3rd chapter Looking good! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

03-11-2021, 01:53 PM	#19
Sam1968 PNW Registered User Join Date: Feb 2021 Location: Port Orchard, Wa Posts: 14	Re: What did you do to your truck today.The 3rd chapter Got my bedsides ready for blast n paint! Attached Images __________________ -1968 C20 Conversion Under Construction -Son Of A 22 Yr Retired USN E-8/Housewife -Father of 2, Partner To My Love -23 Yr Ship Repair Welder/Fabricator -PNW LMB Kayak Fisherman ”IT IS WHAT IT IS, AINT NOTHIN TO IT BUT TO DO IT SON”

03-13-2021, 10:03 PM	#20
ChevyGuyNC Registered User Join Date: Sep 2011 Location: Jacksonville, FL Posts: 143	Re: What did you do to your truck today.The 3rd chapter Got the old girl purring today, thanks to my new friend Eddie. We discovered the timing way off, too far advanced. Back to a factory 8 degrees, and she really smoothed out. Then getting the dwell back to 30, and some carb adjustment. Wow what a difference. Also found that the mufflers are shot, broken inside and rattling loudly... so off to the muffler shop ASAFP. Also reconnected the cig lighter, and the AM radio antenna cable. Guess what, the 50 year old stock AM still works! Got the hood adjusted so it doesn't stick up by the cowl too. So no new hinges needed. __________________ 1972 Cheyenne Super LWB, 350V8, AC, PS, PB, all original 46k survivor

03-13-2021, 10:44 PM	#21
NoStopN Registered User Join Date: Jul 2016 Location: Murfreesboro, TN Posts: 229	Re: What did you do to your truck today.The 3rd chapter Yeah ChevyGuy, these radios still work easily. I have the problem of the speaker not being hooked up right by a previous owner. __________________ 1969 GMC 2500. 250 I6, 4-speed w/ granny low

03-14-2021, 07:47 PM	#22
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,785	Re: What did you do to your truck today.The 3rd chapter Installed bed fender and grille. Will be picking up driver door from the body shop on Monday. Attached Images



Register or Log In To remove these advertisements.

03-14-2021, 07:53 PM	#23
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: What did you do to your truck today.The 3rd chapter What ya doing with the drivers fender? __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

03-14-2021, 08:00 PM	#24
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,785	Re: What did you do to your truck today.The 3rd chapter That primer one I've got on there is temporary. I got the original one repaired and painted, but I'm going to install it after I install the door since the hinge bolts are a pain to access with the fender in place. I was planning on installing the grille at that same time, but I got impatient. Attached Images

Register or Log In To remove these advertisements.