Al's 71C10 Rebuild - Page 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big_al_71 · 04-05-2013, 08:43 PM

Keith that's the main reason why I have been hesitant about doing that mod. I would rather just buy another set of rear wheels with the correct backspace. But I am ok with it don't feel like spending 1600.00 on new rear wheels to gain a half inch lower. Knowing how I always get tired of wheels my next set will have the different offset.

Rob definitely a great idea on the group but if I decide to go that route I will speak with Justin.
Posted via Mobile Device

**lolife99** · 04-05-2013, 08:48 PM

$1600?
I just figured a new housing and axles,... and swap all of your parts.
Plus you get to keep the amount of wheel lip, that you have now.

big_al_71 · 04-05-2013, 09:28 PM

Quote:

Originally Posted by lolife99

$1600?
I just figured a new housing and axles,... and swap all of your parts.
Plus you get to keep the amount of wheel lip, that you have now.

The 1600.00 is for two new wheels with a different bs. The part that kind of blows is that everything is brand new in this rear end and it will still cost a few hundred dollars between all involved to switch over plus time

I guess I could start trying to find one around here then make it a day job
Posted via Mobile Device

Scottshotrods · 04-05-2013, 09:29 PM

Call me at the shop and we can do GROUP BUY FOR SURE.Will be in on monday

On one more note me and wife had our first child on April 3 at 8:14 am 9 lbs 14 oz 22 inches long.Super excited

Justin

big_al_71 · 04-05-2013, 09:41 PM

Quote:

Originally Posted by Scottshotrods

Call me at the shop and we can do GROUP BUY FOR SURE.Will be in on monday

On one more note me and wife had our first child on April 3 at 8:14 am 9 lbs 14 oz 22 inches long.Super excited

Justin

Congrats brother!!!!!

Nothing in earth can compare to being a father!!!!
Posted via Mobile Device

babyblueoval · 04-05-2013, 09:58 PM

Quote:

Originally Posted by Scottshotrods

On one more note me and wife had our first child on April 3 at 8:14 am 9 lbs 14 oz 22 inches long.Super excited

Justin

Wow, I was sooo close to that. I was 9, 12 and 22". lol

Bennett68C10 · 04-05-2013, 10:51 PM

Quote:

Originally Posted by Hart_Rod

I need a couple of sets of those also. Let me know, we could do a "group buy",

.

I would be in for a set of these too. Justin I hope you do make these, should sell like hot cakes.
Posted via Mobile Device

Bennett68C10 · 04-05-2013, 10:55 PM

Quote:

Originally Posted by lolife99

$1600?
I just figured a new housing and axles,... and swap all of your parts.
Plus you get to keep the amount of wheel lip, that you have now.

I agree with Keith, before I did anything else I would change the rear to the narrow axle before I did anything with those sweet wheels.
Posted via Mobile Device

blake's first · 04-27-2013, 04:16 PM

Hey Al nice looking truck it's to bad about the wheels we just picked up the wheels for my nephews 72 there 22x10 5ibs front and 22x10 4ibs rear so we are doing a lot of cutting he should be a better welder after we get it done Joe.....

big_al_71 · 04-27-2013, 05:18 PM

Thanks joe!!!
I am ok with the wheels as even it they tucked more I would only gain 1/2 inch so it is not a big deal plus I like the fat look in the rear it has
Posted via Mobile Device

CAL 58 GMC · 05-02-2013, 11:20 PM

Just went througth most of your build. Very nice ride you have and good taste too!

big_al_71 · 05-03-2013, 12:03 AM

Thank you I appreciate it!!!!
Posted via Mobile Device

big_al_71 · 05-13-2013, 04:48 PM

Took sylvester to my shop saturday cleaned the heck out of it tuned it up and on the way home mother nature decided that it was her turn to take on
sylvester...

Very nasty drive home and of course had to clean the heck out of it again when i got home

All in all a great day!!!!

jmedero · 05-13-2013, 10:50 PM

Sunshine state isn't always sunny. I love the random rain storms. Not as bad since I moved up here but sure do remember them down south.
Posted via Mobile Device

big_al_71 · 05-13-2013, 11:38 PM

Juan here lately it has been beautiful all day till right around 4:00pm then the skies just open up...
Posted via Mobile Device

69CST-V · 05-14-2013, 08:36 AM

Al,
Nice to see you driving Sylvester even in the rain. LOL

big_al_71 · 05-14-2013, 11:06 AM

Quote:

Originally Posted by 69CST-V

Al,
Nice to see you driving Sylvester even in the rain. LOL

Hey Bryce!!!

Not by choice....

**67cheby** · 05-14-2013, 12:47 PM

LOL ! Congrats also !

**superflysteiny** · 05-14-2013, 02:40 PM

Nice I hate the rain

big_al_71 · 05-14-2013, 09:12 PM

Quote:

Originally Posted by 67cheby

LOL ! Congrats also !

Quote:

Originally Posted by superflysteiny

Nice I hate the rain

I love rain when I am indoors not driving my bucket

big_al_71 · 06-17-2013, 08:20 AM

Well finally we had some pretty nice weather after weeks of raining everyday. I took Sylvester out for a drive

put some gas

I really love driving this truck and the attention it gets to boot.

Hope everyone had a great fathers day !!!

Bennett68C10 · 06-17-2013, 08:29 AM

I can not say this enough Al, simply beautiful.

jmedero · 06-17-2013, 09:17 AM

I think you like the building process more.... So I'm going to help you out and come get this one from you so you can build another one.....
Posted via Mobile Device

big_al_71 · 06-17-2013, 09:50 AM

Quote:

Originally Posted by Bennett--G4L

I can not say this enough Al, simply beautiful.

Thanks Keith!!!

Quote:

Originally Posted by jmedero

I think you like the building process more.... So I'm going to help you out and come get this one from you so you can build another one.....
Posted via Mobile Device

come on down brother.. I am sitting waiting around for Raul to let me know when to come over and at least pass him the tools..

69CST-V · 06-17-2013, 09:51 AM

Quote:

Originally Posted by jmedero

I think you like the building process more.... So I'm going to help you out and come get this one from you so you can build another one.....
Posted via Mobile Device

X2

04-05-2013, 08:43 PM	#1651
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Keith that's the main reason why I have been hesitant about doing that mod. I would rather just buy another set of rear wheels with the correct backspace. But I am ok with it don't feel like spending 1600.00 on new rear wheels to gain a half inch lower. Knowing how I always get tired of wheels my next set will have the different offset. Rob definitely a great idea on the group but if I decide to go that route I will speak with Justin. Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

04-05-2013, 08:48 PM	#1652
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: Al's 71C10 Rebuild $1600? I just figured a new housing and axles,... and swap all of your parts. Plus you get to keep the amount of wheel lip, that you have now. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

04-05-2013, 09:29 PM	#1654
Scottshotrods Registered User Join Date: Oct 2008 Location: oxnard ca Posts: 2,201	Re: Al's 71C10 Rebuild Call me at the shop and we can do GROUP BUY FOR SURE.Will be in on monday On one more note me and wife had our first child on April 3 at 8:14 am 9 lbs 14 oz 22 inches long.Super excited Justin

04-27-2013, 04:16 PM	#1659
blake's first Registered User Join Date: Mar 2013 Location: Herald cal. Posts: 243	Re: Al's 71C10 Rebuild Hey Al nice looking truck it's to bad about the wheels we just picked up the wheels for my nephews 72 there 22x10 5ibs front and 22x10 4ibs rear so we are doing a lot of cutting he should be a better welder after we get it done Joe..... Attached Images

04-27-2013, 05:18 PM	#1660
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Thanks joe!!! I am ok with the wheels as even it they tucked more I would only gain 1/2 inch so it is not a big deal plus I like the fat look in the rear it has Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-02-2013, 11:20 PM	#1661
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: Al's 71C10 Rebuild Just went througth most of your build. Very nice ride you have and good taste too! __________________ Classic Trucks Link http://www.classictrucks.com/feature...uck/index.html 1958 GMC.Project Build http://67-72chevytrucks.com/vboard/s...d.php?t=162816 1966 Chevelle Build http://67-72chevytrucks.com/vboard/s...d.php?t=443576 Video http://www.youtube.com/watch?v=prrNKo8F7Zw#GU5U2spHI_4

05-03-2013, 12:03 AM	#1662
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Thank you I appreciate it!!!! Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-13-2013, 04:48 PM	#1663
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Took sylvester to my shop saturday cleaned the heck out of it tuned it up and on the way home mother nature decided that it was her turn to take on sylvester... Very nasty drive home and of course had to clean the heck out of it again when i got home All in all a great day!!!! Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-13-2013, 10:50 PM	#1664
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Al's 71C10 Rebuild Sunshine state isn't always sunny. I love the random rain storms. Not as bad since I moved up here but sure do remember them down south. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

05-13-2013, 11:38 PM	#1665
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Juan here lately it has been beautiful all day till right around 4:00pm then the skies just open up... Posted via Mobile Device __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

05-14-2013, 08:36 AM	#1666
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Al's 71C10 Rebuild Al, Nice to see you driving Sylvester even in the rain. LOL __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

05-14-2013, 12:47 PM	#1668
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Al's 71C10 Rebuild LOL ! Congrats also ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

05-14-2013, 02:40 PM	#1669
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Al's 71C10 Rebuild Nice I hate the rain __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

06-17-2013, 08:20 AM	#1671
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Al's 71C10 Rebuild Well finally we had some pretty nice weather after weeks of raining everyday. I took Sylvester out for a drive put some gas I really love driving this truck and the attention it gets to boot. Hope everyone had a great fathers day !!! Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

06-17-2013, 08:29 AM	#1672
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Al's 71C10 Rebuild I can not say this enough Al, simply beautiful. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

06-17-2013, 09:17 AM	#1673
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Al's 71C10 Rebuild I think you like the building process more.... So I'm going to help you out and come get this one from you so you can build another one..... Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

Register or Log In To remove these advertisements.