What did you do to your truck today! - Page 67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ItsRandy · 02-13-2011, 11:33 PM

Painted 1/2 of my frame today.

magwakeenercew2jh · 02-14-2011, 12:35 AM

Quote:

Originally Posted by cokeb

Magwakeenercre2jh, what did you use to remove the markings off the original plastic lens prior to installing your tach?
Craig

A jigsaw. I cut the original lens out and used the one that came with the tach. The white around the edge is some 12 or 14 gauge
wire with the ends cut on the bias and pressed in with a touch of glue.

The logo is my motorcycle "club"...a sticker reduced on th e printer, cut out and glued to the black face of the aftermarket tach.

magwakeenercew2jh · 02-14-2011, 12:42 AM

Quote:

Originally Posted by ItsRandy

Painted 1/2 of my frame today.

Sweet!

dan42 · 02-14-2011, 12:59 AM

I fixed my squeaky clutch pedal - I ended up having to pull the dash to get at the top hinge, but it doesn't squeak now - very nice.

cokeb · 02-14-2011, 01:10 AM

Quote:

Originally Posted by magwakeenercew2jh

A jigsaw. I cut the original lens out and used the one that came with the tach. The white around the edge is some 12 or 14 gauge
wire with the ends cut on the bias and pressed in with a touch of glue.

The logo is my motorcycle "club"...a sticker reduced on th e printer, cut out and glued to the black face of the aftermarket tach.

thanks, when my son and I did his we left the original lens untouched and at times it seems distracting.

Craig

blazerboy_4life · 02-14-2011, 02:11 AM

I ordered Aluminum valve covers for my new motor that should be done next week!

*project 67 sub* · 02-14-2011, 04:25 AM

installed the rear bags and lines, aired it up and set it on the ground. then i moved the jack stands to the front, so i can tear it apart in the next couple of days or so to do the front bag and drop spindle install. also installed the chrome exhaust tips.

steelscout · 02-14-2011, 05:56 AM

Changed out water pump due to bad bearing, and turns out the water pump was for a 69 corvette??? brought old one with me and matched up. Replaced while it hailed on me on Saturday night...and replaced both belts. Need to replace pump pulley since that happens to be the cause of my screech when I rev it. After work it will be replaced. And then put it all back together. oh yeah...got the driver door to lock now.

eagleuh1 · 02-14-2011, 01:28 PM

Replaced my heater blower, since it wouldn't work while working in Louisianna for a month, while they had the rainiest/coldest Jan on record. Fogged up windows the whole time. Checked fuses,switch, voltage at blower connector, all good. Replaced motor, No work. Tapped the ground wire above motor with screw driver, works great. Anyone need a 40 yr old working blower motor. Also installed my licence plate frame to rear sport bumper. Still need to buy light for it. CHeck your grounds. Jim.

*project 67 sub* · 02-14-2011, 08:55 PM

wire wheeled and grinded down the a arms, want to get them sand blasted before paint and reassembly. gonna go back out and start tearing apart the front end in a few minutes

Name: Photo02141616.jpg
Views: 667
Size: 81.2 KB

Name: Photo02141616.jpg
Views: 667
Size: 81.2 KB

Name: Photo02141617.jpg
Views: 660
Size: 91.2 KB

Name: Photo02141618.jpg
Views: 611
Size: 89.4 KB

Name: Photo02141618_1.jpg
Views: 613
Size: 90.6 KB

ItsRandy · 02-15-2011, 12:47 AM

Rebuilt the upper and lower control arms today, became a man in the process.
Posted via Mobile Device

*project 67 sub* · 02-15-2011, 03:15 AM

got one side of the front end all torn apart, need to do some cutting on the spring pocket tomorrow, gonna be cutting out the top for air line, valve, and bag bolt access

Name: Photo02142143.jpg
Views: 610
Size: 52.7 KB

Name: Photo02142143.jpg
Views: 610
Size: 52.7 KB

Name: Photo02142144.jpg
Views: 650
Size: 47.5 KB

stevencvn72 · 02-15-2011, 03:52 AM

Quote:

Originally Posted by project 67 sub

got one side of the front end all torn apart, need to do some cutting on the spring pocket tomorrow, gonna be cutting out the top for air line, valve, and bag bolt access

Attachment 699634

Attachment 699635

Don't forget to post pics of your cut out. I'll be doing the same on mine and want to see what'll work. I've seen folks cut out a hole in the outside edge too.

mmmBoost · 02-15-2011, 04:56 AM

yesterday

Name: 100_0484.jpg
Views: 570
Size: 38.3 KB

tonight

Name: DSC05117.jpg
Views: 552
Size: 31.5 KB

*project 67 sub* · 02-15-2011, 05:01 AM

Quote:

Originally Posted by stevencvn72

Don't forget to post pics of your cut out. I'll be doing the same on mine and want to see what'll work. I've seen folks cut out a hole in the outside edge too.

oh for sure i will be posting pics, will most likely, (later), run the valves right directly at the bag port, and the line straight into that with no elbows lol. can you say fast haha.

edit: ah i have seen that too, but it wont work for me lol. that and i am trying to be a little different

cooter472 · 02-15-2011, 03:24 PM

Installed new Eaton posi unit with new bearings.

wannabelow68 · 02-15-2011, 06:28 PM

New oil pan gasket, and bolts a 700r4 up to my 250. All it took was some blood,sweat, lack of sleep and help from zip ties and all thread!

mcmlxix · 02-15-2011, 07:44 PM

Ordered my Art Carr shifter....

trkfrk · 02-15-2011, 08:48 PM

[QUOTE=mcmlxix;4488882]Ordered my Art Carr shifter....

I like it..

unreconstructed1 · 02-15-2011, 08:58 PM

sent my 96 to the transmission shop and ordered the new filler neck grommet for the new gas tank on the 69...

mcmlxix · 02-15-2011, 08:58 PM

[quote=trkfrk;4489107]

Quote:

Originally Posted by mcmlxix

Ordered my Art Carr shifter....

I like it..

Thanks.. they joke it looks like an old arcade game joystick.. but I plan making this work anyway....

67swb72klb · 02-15-2011, 09:01 PM

looked for a lt1 for the 67 swb then blocked out the tailgate for 72k10 cause this guy keeps telln me my bed sides are gona start slaping around if i dont get one on soon

Sicklajoie · 02-15-2011, 09:47 PM

Got my steelies back from the painter (nice and white) and ordered my tires (Michelin LTX M/S2 265/75/16) today.

60ratrod · 02-15-2011, 09:52 PM

looked at a 67 chevy parts truck that a guy is parting out and is going to let me have the front end sheet metal for only $50! so my 72 gmc will get the nice sleek look of a 67.

Mike J · 02-15-2011, 10:36 PM

finally removed my old cracked windshield!

02-13-2011, 11:33 PM	#1651
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Painted 1/2 of my frame today. Attached Images

02-14-2011, 12:59 AM	#1654
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: What did you do to your truck today! I fixed my squeaky clutch pedal - I ended up having to pull the dash to get at the top hinge, but it doesn't squeak now - very nice. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

02-14-2011, 02:11 AM	#1656
blazerboy_4life 70Custom10 Join Date: Jan 2010 Location: Rapid City, SD Posts: 322	Re: What did you do to your truck today! I ordered Aluminum valve covers for my new motor that should be done next week! Attached Images

02-14-2011, 04:25 AM	#1657
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! installed the rear bags and lines, aired it up and set it on the ground. then i moved the jack stands to the front, so i can tear it apart in the next couple of days or so to do the front bag and drop spindle install. also installed the chrome exhaust tips.

02-14-2011, 05:56 AM	#1658
steelscout Words under my name Join Date: Nov 2010 Location: Lakewood, Washington Posts: 181	Re: What did you do to your truck today! Changed out water pump due to bad bearing, and turns out the water pump was for a 69 corvette??? brought old one with me and matched up. Replaced while it hailed on me on Saturday night...and replaced both belts. Need to replace pump pulley since that happens to be the cause of my screech when I rev it. After work it will be replaced. And then put it all back together. oh yeah...got the driver door to lock now. __________________ 69 Chevy CST/10 "Project: Bloody Knuckles" my slow going project. 2010 VW Golf, daily driver Wrench Rookie Last edited by steelscout; 02-14-2011 at 06:37 AM.

02-14-2011, 01:28 PM	#1659
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: What did you do to your truck today! Replaced my heater blower, since it wouldn't work while working in Louisianna for a month, while they had the rainiest/coldest Jan on record. Fogged up windows the whole time. Checked fuses,switch, voltage at blower connector, all good. Replaced motor, No work. Tapped the ground wire above motor with screw driver, works great. Anyone need a 40 yr old working blower motor. Also installed my licence plate frame to rear sport bumper. Still need to buy light for it. CHeck your grounds. Jim.

02-14-2011, 08:55 PM	#1660
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! wire wheeled and grinded down the a arms, want to get them sand blasted before paint and reassembly. gonna go back out and start tearing apart the front end in a few minutes

02-15-2011, 12:47 AM	#1661
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Rebuilt the upper and lower control arms today, became a man in the process. Posted via Mobile Device

02-15-2011, 03:15 AM	#1662
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: What did you do to your truck today! got one side of the front end all torn apart, need to do some cutting on the spring pocket tomorrow, gonna be cutting out the top for air line, valve, and bag bolt access

02-15-2011, 04:56 AM	#1664
mmmBoost Registered User Join Date: Jan 2011 Location: Wisconsin Posts: 224	Re: What did you do to your truck today! yesterday tonight __________________ Always remember those that had your back Never forget those that turned it Demon 68- C20 (conv. 5 lug) 406sb, TH400, 12 Bolt, Red Slut 09- 1500 Crew Cab Z71, 2.5" Lift, Comp Cam, Deleted AFM/DoD, Diablo tuner

02-15-2011, 03:24 PM	#1666
cooter472 Registered User Join Date: Dec 2010 Location: Hanover, Indiana Posts: 55	Re: What did you do to your truck today! Installed new Eaton posi unit with new bearings. __________________ 71 C10 2WD,472 Big Block Buick B4B Intake,800 cfm Q-Jet built by(Fred Catlin) Comp Cam 254/268@ .050 .530/542 lift 1 7/8 supercomp headers, 2 1/2 X-Pipe/ Magnaflow's Mallory fuel system Igniter Flame thrower Ignition system TH350,Hughes 3500 Converter ,3.73's Its just an old heap, but its my hot rod!

02-15-2011, 06:28 PM	#1667
wannabelow68 Registered User Join Date: Sep 2010 Location: bucks county Posts: 18	Re: What did you do to your truck today! New oil pan gasket, and bolts a 700r4 up to my 250. All it took was some blood,sweat, lack of sleep and help from zip ties and all thread! __________________ 1968 Chevy c10. CPP drop and disc brake conversion. straight six 250/powerglide. YUP!!! truck club

02-15-2011, 07:44 PM	#1668
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: What did you do to your truck today! Ordered my Art Carr shifter.... __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

02-15-2011, 08:48 PM	#1669
trkfrk Registered User Join Date: Jul 2010 Location: Las Vegas, NV Posts: 969	Re: What did you do to your truck today! [QUOTE=mcmlxix;4488882]Ordered my Art Carr shifter.... I like it.. __________________ Mark 1972 C10 SWB LS1/T56 6 speed trans/4:56 posi with 5.5"-7" static drop/Boss 338 Wheels 18"x20" My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=424609. My first start up http://youtu.be/R899YQ1OcjU

02-15-2011, 08:58 PM	#1670
unreconstructed1 nec absolutum Join Date: Jan 2007 Location: Tennessee Posts: 223	Re: What did you do to your truck today! sent my 96 to the transmission shop and ordered the new filler neck grommet for the new gas tank on the 69... __________________ "The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants."~ Thomas Jefferson 1967 GMC C1500 LWB 250/3 on the tree- 1969 Chevy C/10 SWB 350/TH350 1996 Chevy Silverado LWB 350/4L60E 1997 Chevy K2500 350/4L80E



Register or Log In To remove these advertisements.

02-15-2011, 09:01 PM	#1672
67swb72klb Registered User Join Date: Dec 2010 Location: livingston co.mi Posts: 2,467	Re: What did you do to your truck today! looked for a lt1 for the 67 swb then blocked out the tailgate for 72k10 cause this guy keeps telln me my bed sides are gona start slaping around if i dont get one on soon __________________ California 65 GTO---Texas 64 burb 283 ---Oklahoma 67 CST SWB BBW wood bed 327 2004r---New Mexico 72 k10 350 350 auto---Georga 72 short step project

02-15-2011, 09:47 PM	#1673
Sicklajoie The Niner Join Date: Nov 2010 Location: Broad Brook, CT Posts: 2,498	Re: What did you do to your truck today! Got my steelies back from the painter (nice and white) and ordered my tires (Michelin LTX M/S2 265/75/16) today. __________________ "A good racer is one whose head is in communication with his balls." - Richie Evans 1970 C/20 - 402/TH400/3.54s - 74K miles 2003 GMC Sierra 2500 - Wheatland Yellow Niner Progression Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697183 Classic Trucks article: https://www.motortrend.com/features/...et-c20-driven/

02-15-2011, 09:52 PM	#1674
60ratrod yes, i do Join Date: Jun 2007 Location: Spokane, wa Posts: 2,734	Re: What did you do to your truck today! looked at a 67 chevy parts truck that a guy is parting out and is going to let me have the front end sheet metal for only $50! so my 72 gmc will get the nice sleek look of a 67. __________________ ERROR 404....... SNAPPY COMEBACK NOT FOUND _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900

02-15-2011, 10:36 PM	#1675
Mike J vw guy & now c-10 guy Join Date: Sep 2008 Location: Louisville,KY Posts: 483	Re: What did you do to your truck today! finally removed my old cracked windshield! __________________ '68 long fleet Finally made some progress on the build!!! My Build Thread

Register or Log In To remove these advertisements.