1969 Short Wide

[mcbassin]

Originally Posted by litew8

idk didn't he clean everything beforehand? I didn't have anything that noticeable when we shot in my brothers garage. Glad you got them knocked down and it shined up awesome

He? Who me? I'm the one that cleaned the truck panels. Like I said the only dust came from my parts. The booth was spotless, immaculate you could eat off the walls and floor clean. It's called a rookie cleaning job in all the crevices....

Originally Posted by screaminchevypickup

Umm I'm pretty sure my booth was clean!!

That's an understatement. Remember the tailgate... Dust cloud. Trust me any contamination came from my panels not being properly cleaned and not the booth. Sorry Kyle.

[Low Elco]

Looks great Mike!

[mikeleeshields]

looks silky smooth Mike

[litew8]

Didn't mean to ruffle anybody's feathers. I said 'he' I assumed the painter cleans the parts before painting. My brother does so I figured...

[knomadd]

I believe Mike painted it himself, he just used Kyle's booth. I'm getting that from reading between the lines on post #1689 in page 68 of this thread. I may be mistaken, but if I'm right, the painter did clean the parts before painting

Still looks great Mike! Some trash is hard to avoid, even if you are very meticulous. At least it's sanding/buffing out.

[mcbassin]

Originally Posted by litew8

Didn't mean to ruffle anybody's feathers. I said 'he' I assumed the painter cleans the parts before painting. My brother does so I figured...

Let's not get off point here, it's distracting from what I was trying to share, and that is a technique to remove trash from the surface using a sharpie as a guide coat. If you don't, there's a high likelihood there will be a small high spot. Yes, I got some debris in my clear, it's part of any paint job.

I prepped the panels as best as I could but obviously, there was some dust lurking inside of stake pockets or came off my sleeves, whatever..... It's going to happen. Maybe not in your brother's garage but pretty much everywhere else.

Originally Posted by knomadd

I believe Mike painted it himself, he just used Kyle's booth. I'm getting that from reading between the lines on post #1689 in page 68 of this thread. I may be mistaken, but if I'm right, the painter did clean the parts before painting

Still looks great Mike! Some trash is hard to avoid, even if you are very meticulous. At least it's sanding/buffing out.

Thanks Duane, You are spot on, Yes I did all the bodywork all the primer, all the sanding, all the prepping, cleaning, then painting and yes Kyle was kind enough to let me use his spotless facility. Anyone that paints will get dust particle, the majority comes off the painter himself. even Chip Foose has pointed this out on Overhaulin. All you can do is the best you can do.
Keep in mind when I painted and cleared the bed it was deep into the night early morning. Way past the point of give a crap about particles.

Now, let's move on......

[KSWes]

I'm sure even Chip Foose get's a little dust in his jobs from time to time. Good technique with the sharpie, gonna steal that when I get around to wet sand and buff. Truck is looking great gonna look like a sheet of glass when you're done.

[mcbassin]

Good technique with the sharpie, gonna steal that when I get around to wet sand and buff. Truck is looking great gonna look like a sheet of glass when you're done.

Thanks Wes.

[litew8]

ok I won't comment any more about that and I had forgotten that you previously mentioned you had painted with assistance or tips. Obviously your technique works well, but others should also be made aware that cleaning of parts prior to paint, (and/or) primer is essential. Too large of particles could end up falling out when sanded, causing more issues. My brother's garage is far from clean (even when cleaned). He'll usually air hose off and wipe down prior. There's lots to the whole process. Life happens, I get that.

[scotts62]

Anyways...

Keep it up Mike, looks great!!!

So after all the "fun" is over what is the next plan of action?

[mcbassin]

Originally Posted by scotts62

Anyways...

Keep it up Mike, looks great!!!

So after all the "fun" is over what is the next plan of action?

Thanks Scott. The fun part will actually start after all the paint stuff is done. I will finish all the little wiring and parking brake details on the chassis, then install the cab for the last time.
Then do all the wiring, then final assembly...boom then burnouts

[mcbassin]

Hood is done.





Got rid of the glare factor on the dash panel:

[screaminchevypickup]

Looks great mike!

[jlsanborn]

You're knocking this out Mike! The black dash is really cool

[mcbassin]

Originally Posted by screaminchevypickup

Looks great mike!

Thanks Kyle

Originally Posted by jlsanborn

You're knocking this out Mike! The black dash is really cool

Thanks. I was worried the shiny red paint would give me fits in the Oklahoma sunny summers. I used the Medallion Hot Rot satin black , Heck I still have a half a gallon. I need to use it somewhere other than the engine bay

[JamesRKing72]

Wow, coming together nice. I'm glad for some warm weather so I can get some progress made myself.

[mcbassin]

Originally Posted by JamesRKing72

Wow, coming together nice. I'm glad for some warm weather so I can get some progress made myself.

Thanks James for checking out my thread. I know it's very long winded....these projects have a tendency to go from fixing up a driver into a full blown restoration. Dang! there's a bunch of work involved to do one.....
I'm going to check out your build.

[KSWes]

Something about these trucks that just makes you want to fix them up. Mine was just going to haul, trash, brush, 2 by 4's and pull a trailer when I got it. Then I caught the bug.

Your dash looks great!

[ColoradoK5]

great job on the paint and finish looks great!

[knomadd]

The hood looks great! Nice touch with the dash. Now you just need to worry about the reflection from the hood, especially driving into the sun as evening starts.

Ask me how I know

[mcbassin]

Originally Posted by KSWes

Something about these trucks that just makes you want to fix them up. Mine was just going to haul, trash, brush, 2 by 4's and pull a trailer when I got it. Then I caught the bug.
Your dash looks great!

Thanks. I totally agree. One of these days we are going to do a beater for my son. I have everything to build it basically. (68 short stepper/or fleet either one). We definitely won't spend near 5 years on it....

Originally Posted by ColoradoK5

great job on the paint and finish looks great!

Thanks for the kind words.

Originally Posted by knomadd

The hood looks great! Nice touch with the dash. Now you just need to worry about the reflection from the hood, especially driving into the sun as evening starts.

Ask me how I know

thanks Duane. I'm a little worried about the glare but if I'm driving it at sunset.....hell I don't care..I'll be driving it. That's the goal

[jeh]

Mike, in my opinion you're paint is turning out great, and the main point is, You are doing it yourself. Keep up the great work. You're going to have one fine ride.

[mcbassin]

Originally Posted by jeh

Mike, in my opinion you're paint is turning out great, and the main point is, You are doing it yourself. Keep up the great work. You're going to have one fine ride.

Thanks a bunch Jason. It has been one heck of a learning experience. Back in the day I could literally do a full paint job in a week or two. But it was usually single stage very minimal bodywork.
I'm ready to get it done and enjoy it.

[big_al_71]

Paint looks terrific!!!!!

[mcbassin]

Originally Posted by big_al_71

Paint looks terrific!!!!!

Thanks big Al getting close to finishing all the painting stuff.