What did you do today not on your truck... - Page 68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Boog** · 10-23-2021, 03:06 PM

I replaced the driver side engine mount on the wife's 4wd Yukon. That was a piece of .... design. I know who the designers work for and it isn't the mechanics who replace them down the line. Rolls eyes

**Getter-Done** · 10-23-2021, 03:16 PM

Quote:

Originally Posted by Boog

I replaced the driver side engine mount on the wife's 4wd Yukon. That was a piece of .... design. I know who the designers work for and it isn't the mechanics who replace them down the line. Rolls eyes

I worked at an Auto assembly plant for several years.

They build everything they can in sub-assembly's.
The dash, frontend, and then the body is set down on the frame.

They don't think about how someone will get to it later

**Boog** · 10-23-2021, 03:39 PM

Yeah. I had to drop the front diff to swap that mount after trying to do it from the tooside. Putting the diff back in was the chore. Maybe I won’t have to do it again while we have it.

**cwcarpenter98** · 10-23-2021, 11:46 PM

Helped out my church with their annual pig roast.

238lb dressed weight. Tasted delicious

Went on the fire last night around 6, was done cooking around 9 this morning

**71CHEVYSHORTBED402** · 10-24-2021, 04:57 PM

Lately I forget the rims on toms are not for your knuckle. No reason to stop in the middle of Fleetwood Mac's Dreams however, I think it had enough with Hypnotized and just got worse from there. It's still a runner, must be the adrenaline

I was about done anyway.

Personal memory, Dreams was the first song I tried drumming to, what a beautiful tune. Just once, at 14, on my brother's set. He'd have killed me if he knew, and besides, we lived in apts. at the time, I doubt the neighbors appreciated it much. I don't think I played again until I bought my first set at my own place, 8-9 years later.

**FleetsidePaul** · 10-25-2021, 02:05 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

Lately I forget the rims on toms are not for your knuckle. No reason to stop in the middle of Fleetwood Mac's Dreams however, I think it had enough with Hypnotized and just got worse from there. It's still a runner, must be the adrenaline

I was about done anyway.

Personal memory, Dreams was the first song I tried drumming to, what a beautiful tune. Just once, at 14, on my brother's set. He'd have killed me if he knew, and besides, we lived in apts. at the time, I doubt the neighbors appreciated it much. I don't think I played again until I bought my first set at my own place, 8-9 years later.

I can't even imagine drumming in an apartment. I can wear headphones with my guitar. But no way with the drums. Can't turn them down. I get death threats when I play mine.

My neighbors kid was a drummer and my neighbor asked me if the drums bothered me. I said yes because the kid played better than me.

BRL · 10-25-2021, 03:59 AM

Quote:

Originally Posted by special-K

...That bug will be a pleasure to drive WITH BREAKS

HA!

...I'll let you know.

My truck (not truck related) is sure fully capable of covering me while missing driving my Bug...

ZOOM!

**special-K** · 10-25-2021, 06:18 AM

Quote:

Originally Posted by BRL

HA!

...I'll let you know.

Quote:

Originally Posted by special-K

That bug will be a pleasure to drive WITH BRAKES

I have no idea about what you refer. Give me a brake

I've been on jury duty since Wed. Today should be the final day. Sorry, no pictures.

I got the stem wall poured a few weeks ago and let it set. This weekend I got the plate bolted down to complete that phase of "Project barn Move". Next will be prop wall, cut bottom off to height of stem wall, and set down on the blocking it will ride on over to it's new perch

BRL · 10-26-2021, 02:00 AM

Quote:

Originally Posted by special-K

I have no idea about what you refer. Give me a brake

...

OMG we have a comedian in the house!

Hey your place is looking good bud!

**special-K** · 10-26-2021, 06:05 AM

Thanks

All done jury duty as of yesterday!!

Quote:

Originally Posted by BRL

OMG we have a comedian in the house!

Hey your place is looking good bud!

Thanks on the place. I'm trying to stay at it till it's all caught up.

So I dug and poured the threshold for the garage door on my tiny garage. Not a priority but now it's ready for when I get a garage door to install. I decided since I can't do the whole slab right now to just do the step-down where the door sits. When we get a heavy rain water would run out of that drain back into the garage where the floor is dug down for the slab and flood it

**71CHEVYSHORTBED402** · 10-27-2021, 09:35 PM

Quote:

Originally Posted by FleetsidePaul

I can't even imagine drumming in an apartment. I can wear headphones with my guitar. But no way with the drums. Can't turn them down. I get death threats when I play mine.

My neighbors kid was a drummer and my neighbor asked me if the drums bothered me. I said yes because the kid played better than me.

I know those kids too, they were (*)^)(*^ intimidating for almost ever. I've gotten to the point drums come pretty easy though, 40 years on occasion will do that. Doesn't help to be self taught though, I don't read music, and never cared to sit with a band. My only complaint is the improvement arrived same as the arthritis in my thumbs, no big deal.

There's always room for improvement, better I play the more I realize I kind of sucked the status before

never fails. They're a blast, though I only hit them about once a week, it's all my body can take

mr.mud1 · 10-28-2021, 11:39 PM

i had the concrete guys who made the foundation for my new shop last year,come back to do me an apron across the doors,64 feet long and 12 feet out from the building.i wanted more but have to draw the line somewhere.now i have some landscaping to do but i think it looks pretty good.very happy with their work.i have been driving one of their dump trucks a couple days a week for the summer and up til they knock off for the winter in order to pay for it.mission accomplished.i love it when a plan comes together.

**FleetsidePaul** · 10-29-2021, 12:57 AM

Quote:

Originally Posted by mr.mud1

i had the concrete guys who made the foundation for my new shop last year,come back to do me an apron across the doors,64 feet long and 12 feet out from the building.i wanted more but have to draw the line somewhere.now i have some landscaping to do but i think it looks pretty good.very happy with their work.i have been driving one of their dump trucks a couple days a week for the summer and up til they knock off for the winter in order to pay for it.mission accomplished.i love it when a plan comes together.

Very nice building. I am planning on building one. Not quite to that scale, but hopefully enough to get everything inside. The desert sun is brutal on paint and upholstery. I have garages that can hold 5 cars but I have so much junk that I can only fit 2 in them and I have 10 cars and a pool table. I need a building.

mr.mud1 · 10-29-2021, 01:09 AM

yes sir.thanks.it's a nice spot,64x32.twice the size of my old shop,6 cars and trucks,a 20 foot car trailer,a lawn tractor,snow blower,generator,a new tractor on order and looking for a pool table for upstairs and it's almost full??thought i had all the room in the world?never enough room i guess.

**special-K** · 10-29-2021, 05:07 AM

That apron really completes the garage. So nice to be just outside the doors on nice days. Great payment plan!

mr.mud1 · 10-29-2021, 07:58 AM

thanks,i knew it would look good,the guy who did it is the best around here,also the most expensive but you get what you pay for.i didn't know it would look that good,once i get the grass fixed,i think it'll look great and the best payment plan ever.take care.Greg

LT7A · 10-29-2021, 08:02 AM

That's very well done. Kind of a mud room for your garage - a place to rinse them off before rolling them in. Looks great.

mr.mud1 · 10-29-2021, 09:15 AM

yes sir,i'm very happy with it and the job he did.all the best.Greg

**LockDoc** · 10-29-2021, 01:41 PM

-
Made a 280 mile round trip to pick up a Western plow for my '03 Suburban. 13 mpg going with no wind and 15mpg return with a tailwind. I'm happy with that....

GM crate 350 with an NV4500 5 speed overdrive trans.

LockDoc

**special-K** · 10-29-2021, 06:22 PM

That's really good mileage for a tonner. Was that plow off another GM same style? It looks like the universal mount.

**LockDoc** · 10-30-2021, 12:08 AM

Quote:

Originally Posted by special-K

That's really good mileage for a tonner. Was that plow off another GM same style? It looks like the universal mount.

Yes, the plow was off of an '02 Chevy 2500 HD. It bolted right on my '03 2500 HD Suburban. It is a Uni-Mount.

LockDoc

**FleetsidePaul** · 10-30-2021, 01:48 AM

Nice flatbed Leon.

My neighbor has a nice 69 or 70 C30 flatbed. I'd like to buy it off him but he never comes out these days. I think his health is not so hot. Too bad. He's a nice guy. I never saw it until recently. He has a lot of stuff on his property. I don't want to bug him but if I happen to bump into him I'm asking about the truck.

**72 tigger** · 10-30-2021, 08:02 AM

Nice plow! Hopefully you won’t need too much this winter

72c20customcamper · 10-30-2021, 10:27 AM

Not all today but we stack wood on rainy days . Stove has been burning on and off the past two weeks . So we used some so I'll bring down a couple of bucket loads with the Kubota

**LockDoc** · 10-30-2021, 11:15 AM

Quote:

Originally Posted by FleetsidePaul

Nice flatbed Leon.

My neighbor has a nice 69 or 70 C30 flatbed. I'd like to buy it off him but he never comes out these days. I think his health is not so hot. Too bad. He's a nice guy. I never saw it until recently. He has a lot of stuff on his property. I don't want to bug him but if I happen to bump into him I'm asking about the truck.

Thanks Paul.

Quote:

Originally Posted by 72 tigger

Nice plow! Hopefully you won’t need too much this winter

Thanks, I hope not too but I have to be ready.....

LockDoc

10-23-2021, 03:06 PM	#1676
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,459	Re: What did you do today not on your truck... I replaced the driver side engine mount on the wife's 4wd Yukon. That was a piece of .... design. I know who the designers work for and it isn't the mechanics who replace them down the line. Rolls eyes __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

10-23-2021, 03:39 PM	#1678
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,459	Re: What did you do today not on your truck... Yeah. I had to drop the front diff to swap that mount after trying to do it from the tooside. Putting the diff back in was the chore. Maybe I won’t have to do it again while we have it. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

10-23-2021, 11:46 PM	#1679
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,483	Re: What did you do today not on your truck... Helped out my church with their annual pig roast. 238lb dressed weight. Tasted delicious Went on the fire last night around 6, was done cooking around 9 this morning Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

10-24-2021, 04:57 PM	#1680
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,300	Re: What did you do today not on your truck... Lately I forget the rims on toms are not for your knuckle. No reason to stop in the middle of Fleetwood Mac's Dreams however, I think it had enough with Hypnotized and just got worse from there. It's still a runner, must be the adrenaline I was about done anyway. Personal memory, Dreams was the first song I tried drumming to, what a beautiful tune. Just once, at 14, on my brother's set. He'd have killed me if he knew, and besides, we lived in apts. at the time, I doubt the neighbors appreciated it much. I don't think I played again until I bought my first set at my own place, 8-9 years later. Attached Images __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

10-28-2021, 11:39 PM	#1687
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,597	Re: What did you do today not on your truck... i had the concrete guys who made the foundation for my new shop last year,come back to do me an apron across the doors,64 feet long and 12 feet out from the building.i wanted more but have to draw the line somewhere.now i have some landscaping to do but i think it looks pretty good.very happy with their work.i have been driving one of their dump trucks a couple days a week for the summer and up til they knock off for the winter in order to pay for it.mission accomplished.i love it when a plan comes together. Attached Images

10-29-2021, 01:09 AM	#1689
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,597	Re: What did you do today not on your truck... yes sir.thanks.it's a nice spot,64x32.twice the size of my old shop,6 cars and trucks,a 20 foot car trailer,a lawn tractor,snow blower,generator,a new tractor on order and looking for a pool table for upstairs and it's almost full??thought i had all the room in the world?never enough room i guess.

10-29-2021, 05:07 AM	#1690
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: What did you do today not on your truck... That apron really completes the garage. So nice to be just outside the doors on nice days. Great payment plan! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-29-2021, 07:58 AM	#1691
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,597	Re: What did you do today not on your truck... thanks,i knew it would look good,the guy who did it is the best around here,also the most expensive but you get what you pay for.i didn't know it would look that good,once i get the grass fixed,i think it'll look great and the best payment plan ever.take care.Greg

10-29-2021, 08:02 AM	#1692
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,615	Re: What did you do today not on your truck... That's very well done. Kind of a mud room for your garage - a place to rinse them off before rolling them in. Looks great.

10-29-2021, 09:15 AM	#1693
mr.mud1 Registered User Join Date: Dec 2020 Location: Joggins Nova Scotia Posts: 1,597	Re: What did you do today not on your truck... yes sir,i'm very happy with it and the job he did.all the best.Greg

10-29-2021, 01:41 PM	#1694
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,656	Re: What did you do today not on your truck... - Made a 280 mile round trip to pick up a Western plow for my '03 Suburban. 13 mpg going with no wind and 15mpg return with a tailwind. I'm happy with that.... GM crate 350 with an NV4500 5 speed overdrive trans. LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

10-29-2021, 06:22 PM	#1695
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: What did you do today not on your truck... That's really good mileage for a tonner. Was that plow off another GM same style? It looks like the universal mount. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-30-2021, 01:48 AM	#1697
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,419	Re: What did you do today not on your truck... Nice flatbed Leon. My neighbor has a nice 69 or 70 C30 flatbed. I'd like to buy it off him but he never comes out these days. I think his health is not so hot. Too bad. He's a nice guy. I never saw it until recently. He has a lot of stuff on his property. I don't want to bug him but if I happen to bump into him I'm asking about the truck. __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

10-30-2021, 08:02 AM	#1698
72 tigger Senior Member Join Date: Apr 2008 Location: Berne IN Posts: 3,240	Re: What did you do today not on your truck... Nice plow! Hopefully you won’t need too much this winter Attached Images __________________ 71 C10 72 K20 72 K10 Super Kirk

10-30-2021, 10:27 AM	#1699
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,642	Re: What did you do today not on your truck... Not all today but we stack wood on rainy days . Stove has been burning on and off the past two weeks . So we used some so I'll bring down a couple of bucket loads with the Kubota Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.