How about some pics of bagged C-10's - Page 68 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

502ms · 11-17-2011, 07:33 AM

That 62 is hot!
Posted via Mobile Device

ZUBZ · 11-24-2011, 05:50 AM

Quote:

Originally Posted by c10addict

Heres mine... It doesnt get nearly as low as most with air... I built the truck with springs then decided to throw air on it and didn't want to cut it up... Its not notched into the bed and the inner fenders are still in it and its got a pretty tall tire... The one I am building now is getting hammered.... Stay tuned!

I like this drop, how did you achieve this as I prefer not to cut also.

ZUBZ · 11-24-2011, 06:02 AM

Quote:

Originally Posted by 69chevyshort

It's just a simple air bag setup with 2.5 drop spindles. 2600lbs bags up front 2800lbs. bags in rear. 5 gal. tank viair 450 comp. , and parker 3/8 valves. C-notch in rear and chromed front suspension parts. Wheels are 20x10 and 18x8 with 275 /40 in back and 255/45 in front Toyo Proxes. Any more questions?

Hi, Did you have to cut anything in the rear to accommodate the lowering?

ZUBZ · 11-24-2011, 06:24 AM

Quote:

Originally Posted by VA72C10

From his photobucket....

Hi, I like the trims alongside this van, is this a standard issue item? I have never seen it on any of the trucks in South Africa. Where can I buy these trims....

justpball · 11-24-2011, 12:05 PM

New pic of my burb...

Posted via Mobile Device

jmedero · 11-24-2011, 01:39 PM

Hey man the burb came out nice man.
Posted via Mobile Device

SCOTI · 11-24-2011, 02:34 PM

Quote:

Originally Posted by ZUBZ

I like this drop, how did you achieve this as I prefer not to cut also.

Quote:

Originally Posted by ZUBZ

Hi, Did you have to cut anything in the rear to accommodate the lowering?

Drops like these guys have can be achieved in several ways. The fronts usually consist of 2.5" - 3" drop spindles (which require disc brakes) & 2600lb/7" double convoluted bags up front. The rears would be similar but slightly smaller 2500lb/6" dbl convoluted bags in place of the stock coils, bolt-in rear c-notches, lowering blocks (or Porterbuilt Fabrication Truck arms), relocated shock mounts, & a long adjustable Panhard bar.

At this drop amount, the front inner fenderwells & the rear bed floor don't have to be removed or cut. They will be the limitation of the drop.

Quote:

Originally Posted by ZUBZ

I like the trims alongside this van, is this a standard issue item? I have never seen it on any of the trucks in South Africa. Where can I buy these trims....

Check out these places for some trim kits....
http://www.mar-k.com/
http://www.lmctruck.com/

Hope the info helps!

ZUBZ · 11-25-2011, 04:31 AM

Quote:

Originally Posted by SCOTI

Drops like these guys have can be achieved in several ways. The fronts usually consist of 2.5" - 3" drop spindles (which require disc brakes) & 2600lb/7" double convoluted bags up front. The rears would be similar but slightly smaller 2500lb/6" dbl convoluted bags in place of the stock coils, bolt-in rear c-notches, lowering blocks (or Porterbuilt Fabrication Truck arms), relocated shock mounts, & a long adjustable Panhard bar.

At this drop amount, the front inner fenderwells & the rear bed floor don't have to be removed or cut. They will be the limitation of the drop.

Check out these places for some trim kits....
http://www.mar-k.com/
http://www.lmctruck.com/

Hope the info helps!

Scoti, this is great info and help. Ofcourse I will be doing this at a later stage because I first need to get the truck running...:-)

502ms · 11-26-2011, 07:41 PM

That suburban is beautiful! More pics?
Posted via Mobile Device

richards72chevy · 11-29-2011, 10:46 PM

Name: 69200415500AM34991.jpg
Views: 4661
Size: 21.1 KB

Name: 621200983754PM31601.jpg
Views: 4779
Size: 53.0 KB

Name: 1015201162453AM94761.jpg
Views: 4928
Size: 41.0 KB

Name: 1015201162832AM16891.jpg
Views: 4799
Size: 32.3 KB

chopped68 · 11-30-2011, 02:38 AM

new pictures.hand built cantilever rear.ece dropped trailing arm crossmember,thorbecke bros step notch and factory trailing arms z'd 3 inches.383 with 2 390cfm carbs.

big_al_71 · 12-20-2011, 11:19 PM

Here is my 71c10 ride tech kit with tubular arm on 20's all around..

Envious Styles · 12-20-2011, 11:46 PM

WORP67 · 12-21-2011, 01:26 AM

^^^ I love that truck.

ZUBZ · 12-21-2011, 04:57 AM

Quote:

Originally Posted by big_al_71

Here is my 71c10 ride tech kit with tubular arm on 20's all around..

Lovely truck Al. Tell me which level ride tech kit you running? I am looking at fitting the level 1 for c10.

**67cheby** · 12-21-2011, 11:10 AM

Awesome

SCOTI · 12-21-2011, 11:41 AM

Quote:

Originally Posted by ZUBZ

Lovely truck Al. Tell me which level ride tech kit you running? I am looking at fitting the level 1 for c10.

That's more than a bolt-on Ride Tech kit.

OC 72 · 12-21-2011, 11:49 AM

My 72 C10..20's all the way around.

**67cheby** · 12-21-2011, 11:55 AM

man these last 3 trucks are KILLER

JWall · 12-21-2011, 12:26 PM

Not the lowest but it is bagged

Name: H6_detail.jpg
Views: 4374
Size: 54.1 KB

Name: H7_detail.jpg
Views: 3866
Size: 52.9 KB

Name: H8_detail.jpg
Views: 4064
Size: 108.6 KB

jbice70gmc · 12-21-2011, 05:31 PM

Dude from Magnolia Texas has a nice 72 on bags.

JNJchev77 · 12-21-2011, 07:23 PM

I'm callin BS on these last 4 or 5 trucks, someone's just swappin rims and snappin pics!!! lol jk Nice looking trucks, all of you!

**kev2809** · 12-21-2011, 09:25 PM

haha!!

i kept scrollin up to see where the posters were from...i was thinking the same thing

JWall · 12-22-2011, 10:42 AM

Quote:

Originally Posted by JNJchev77

I'm callin BS on these last 4 or 5 trucks, someone's just swappin rims and snappin pics!!! lol jk Nice looking trucks, all of you!

That's funny... we got on a streak on black trucks there...

72BlckButy · 12-22-2011, 12:13 PM

Quote:

Originally Posted by big_al_71

Here is my 71c10 ride tech kit with tubular arm on 20's all around..

Damn... that turned out nice.

11-17-2011, 07:33 AM	#1676
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: How about some pics of bagged C-10's That 62 is hot! Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

11-24-2011, 12:05 PM	#1680
justpball Registered User Join Date: Dec 2008 Location: Silverhill, Al Posts: 2,026	Re: How about some pics of bagged C-10's New pic of my burb... Posted via Mobile Device __________________ Fuzzy Dice Club Member 87 Crew SWB Build for the crew http://67-72chevytrucks.com/vboard/s...d.php?t=430082 http://www.cardomain.com/ride/3232925 90 burb 2wd Build Thread For The Burb! http://67-72chevytrucks.com/vboard/s...d.php?t=383055

11-24-2011, 01:39 PM	#1681
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: How about some pics of bagged C-10's Hey man the burb came out nice man. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

11-26-2011, 07:41 PM	#1684
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: How about some pics of bagged C-10's That suburban is beautiful! More pics? Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

11-29-2011, 10:46 PM	#1685
richards72chevy Registered User Join Date: Dec 2010 Location: konawa ok/oakdale Ca. Posts: 1,652	Re: How about some pics of bagged C-10's

11-30-2011, 02:38 AM	#1686
chopped68 Registered User Join Date: Dec 2009 Location: stanton, california Posts: 74	Re: How about some pics of bagged C-10's new pictures.hand built cantilever rear.ece dropped trailing arm crossmember,thorbecke bros step notch and factory trailing arms z'd 3 inches.383 with 2 390cfm carbs. Attached Images

12-20-2011, 11:19 PM	#1687
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: How about some pics of bagged C-10's Here is my 71c10 ride tech kit with tubular arm on 20's all around.. Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

12-20-2011, 11:46 PM	#1688
Envious Styles Registered User Join Date: Sep 2010 Location: New Orleans, La Posts: 33	Re: How about some pics of bagged C-10's

12-21-2011, 01:26 AM	#1689
WORP67 Registered User Join Date: Jun 2011 Location: Russellville AR Posts: 84	Re: How about some pics of bagged C-10's ^^^ I love that truck.

12-21-2011, 11:10 AM	#1691
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's Awesome __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-21-2011, 11:49 AM	#1693
OC 72 Registered User Join Date: Dec 2011 Location: CA Posts: 361	Re: How about some pics of bagged C-10's My 72 C10..20's all the way around. Attached Images

12-21-2011, 11:55 AM	#1694
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: How about some pics of bagged C-10's man these last 3 trucks are KILLER __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-21-2011, 12:26 PM	#1695
JWall Frequent Flyer Join Date: Aug 2009 Location: Tulsa, OK Posts: 2,258	Re: How about some pics of bagged C-10's Not the lowest but it is bagged __________________ - Justin 76 SWB C-10 - 98 SWB C1500 (x2) 1 Owner 1976 SWB

12-21-2011, 05:31 PM	#1696
jbice70gmc Registered User Join Date: May 2011 Location: Atascocita, TX Posts: 188	Re: How about some pics of bagged C-10's Dude from Magnolia Texas has a nice 72 on bags. Attached Images __________________ 1969 GMC SWB Fleetside http://67-72chevytrucks.com/vboard/s...d.php?t=486320

12-21-2011, 07:23 PM	#1697
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: How about some pics of bagged C-10's I'm callin BS on these last 4 or 5 trucks, someone's just swappin rims and snappin pics!!! lol jk Nice looking trucks, all of you! __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo



Register or Log In To remove these advertisements.

12-21-2011, 09:25 PM	#1698
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: How about some pics of bagged C-10's haha!! i kept scrollin up to see where the posters were from...i was thinking the same thing __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

Register or Log In To remove these advertisements.