What Did You Do With Your Truck Today ?

[lowdownstar]

Originally Posted by mechanixman

I managed to pull the front clip off. Had to destroy the fender corners (already rusted through).
It seems like these guys brazed or TIG welded the fenders to the door and running board. It's almost like they were screwing it up on purpose... That and an 1/8 inch bondo in some places.
Honestly. I'm kinda afraid to see what the bare sheet metal looks like because it may be corroding (or just look nasty) under all the bondo/ paint

Keep the faith one thing at a time and it will come out killer. what are your plans for the truck

Ray

[mknittle]

Originally Posted by mechanixman

I managed to pull the front clip off. Had to destroy the fender corners (already rusted through).
It seems like these guys brazed or TIG welded the fenders to the door and running board. It's almost like they were screwing it up on purpose... That and an 1/8 inch bondo in some places.
Honestly. I'm kinda afraid to see what the bare sheet metal looks like because it may be corroding (or just look nasty) under all the bondo/ paint

Those kind of things were dubbed Neato around here many years ago.

[mechanixman]

Originally Posted by lowdownstar

Keep the faith one thing at a time and it will come out killer. what are your plans for the truck?Ray

For now just have a beater to go to school and work in. Eventually (within two years....hopefully) Drop a 327 tri-power in, 5 speed, 3.73 posi in the rear, and two tone it blue and white(or silver).
A lot of the truck you see are dropped at least a couple inches. I thought it was so cool that I could actually just crawl under the truck with out a jack or stands, that I want to keep her riding high. (Plus I like looking down on other cars. =D )

Originally Posted by mknittle

Those kind of things were dubbed Neato around here many years ago.

Ha ha really?
Who came up with that idea?
It was only on the passenger side too. At least I think. I went with a screw driver, because I thought it would just be bondo. When I wised up, I carefully use an angle grinder and made a couple clean passes on the drivers side. Everything looked clean on that side.

[mknittle]

Originally Posted by mechanixman

For now just have a beater to go to school and work in. Eventually (within two years....hopefully) Drop a 327 tri-power in, 5 speed, 3.73 posi in the rear, and two tone it blue and white(or silver).
A lot of the truck you see are dropped at least a couple inches. I thought it was so cool that I could actually just crawl under the truck with out a jack or stands, that I want to keep her riding high. (Plus I like looking down on other cars. =D )



Ha ha really?
Who came up with that idea?
It was only on the passenger side too. At least I think. I went with a screw driver, because I thought it would just be bondo. When I wised up, I carefully use an angle grinder and made a couple clean passes on the drivers side. Everything looked clean on that side.

That is part of the fun of this hobbie/opsessinn1 To every bad thing there are good things that out weigh them!
Neato started as sarcasm and sorta stuck.

[hsdropout]

Fender welting.

[lowdownstar]

Originally Posted by mechanixman

For now just have a beater to go to school and work in. Eventually (within two years....hopefully) Drop a 327 tri-power in, 5 speed, 3.73 posi in the rear, and two tone it blue and white(or silver).
A lot of the truck you see are dropped at least a couple inches. I thought it was so cool that I could actually just crawl under the truck with out a jack or stands, that I want to keep her riding high. (Plus I like looking down on other cars. =D )



Ha ha really?
Who came up with that idea?
It was only on the passenger side too. At least I think. I went with a screw driver, because I thought it would just be bondo. When I wised up, I carefully use an angle grinder and made a couple clean passes on the drivers side. Everything looked clean on that side.

I like the plan , i can't wait to watch it come alive
Ray

[Dan in Pasadena]

Took "G&R's 57 GMC"'s suggestion; stopped at the local bicycle shop to ask for an inner tube out of their trash and did THIS with it:

Yeah, kind of meh.... But the ones the shops sell don't look much different. It is what it is I suppose.

I also finally got my Craigslist-find front bumper painted on the reverse side and mounted. Thereby finishing the recent front end work:

Hell of an improvement to me.

[oneoff]

Got the 6.2L motor in its new home...

[mknittle]

Originally Posted by oneoff

Got the 6.2L motor in its new home...Attachment 1084068

Looks nice Dennis!

[crossfire84]

mounted booster and hyd clutch master today. and installed a 3pt seatbelt kit.

[tttuba]

took the bed off again last weekend before getting sick AGAIN. darn flu. And mocked up the bed floor just to see what it would look like and to make sure I got the right kit.

[arturo7]

Aaaaarrrghh!!!

Finally able to devote a day to wrenchin' after a 2 month hiatus. Unfortunately, I ran into a couple brick walls working on my axles.

[G&R's57GMC]

Dan in Pasadena, Try finding a smaller diameter tube, one that is tighter to the chain.

Today I installed the Pertronix system and cleaned the spark plug holes and gaped the plugs. Starts instantly, idles better

[sqrlnts]

Brush painted my truck black in 2 hours. Too late for pics will try to post tomorow.

[Dan in Pasadena]

"...Vaseline & paper towels.." To do what? Sounds kinda nasty to me, lol.

As some kind of rust remover? Never heard of that idea before. The paper towels & Ospho worked great though.

Hsdropout- I've wondered about using fender welt. You know these trucks never came with it, right? I think it can look really good but I'd worry it would trap moisture/start rust again.
Posted via Mobile Device

[Dan in Pasadena]

The Slippery Slope"

I wanted off white/almond letters to go with the contrast color on the cab. No dice, only straight white, black or chrome. The added "flash" in back made the other chrome on the truck look like ass.



So I bought new mirrors...
which made the arms look bad....
which made the door handles look bad....
which made me think of the scratch guards (haven't decided if I'm installing those or not yet:




As you can see the door handle chrome was pitted and totally dead:

[Daze57]

''vaseline and paper towels''

sounds like sumthin they would do up here

[youngrodder]

I worked on my interior. I stretched some fabric and covered both boxes in resin. fiberglass will be next. I will end up wrapping these in leather.

Marc

[Dan in Pasadena]

Originally Posted by youngrodder

...covered both boxes in resin. fiberglass will be next...

Marc,
Pardon my ignorance because I know nothing about fiberglas. The fabric is

fiberglas, right? You draped the fabric where you wanted it, THEN you brush on the resin to impregnate it?

If so, why did you say, "...fiberglas will be next.."? I'm missing something.

[OrrieG]

Originally Posted by Dan in Pasadena

Marc,
Pardon my ignorance because I know nothing about fiberglas. The fabric is

fiberglas, right? You draped the fabric where you wanted it, THEN you brush on the resin to impregnate it?

If so, why did you say, "...fiberglas will be next.."? I'm missing something.

Tee shirt fabric, I use it too, great for complex shapes. You stretch, hit it with light coat of resin to stiffen it, then when it dries start laying up the fiberglas mat, etc. Can also be used to make a reverse mold.

[youngrodder]

Originally Posted by OrrieG

Tee shirt fabric, I use it too, great for complex shapes. You stretch, hit it with light coat of resin to stiffen it, then when it dries start laying up the fiberglas mat, etc. Can also be used to make a reverse mold.

Yes, what he said. Ultimately I will be covering it with leather, so I don't need to have the body work spot on..

Next is the fiberglass mat with more resin.

Happy Easter
Marc
Posted via Mobile Device
Posted via Mobile Device

[Daze57]

v nice !

[OrrieG]

Pulled the inside cab corners to fiberglas in the speaker enclosures. Found out the guy that sold me the speakers ripped me off, not honest mistake but very well thought out fraud. A** was moving to Colorado, I hope a bear eats him. Did get the stock door mirror cleaned and tapped and transfered the pattern to the passenger side, tomorrow will tack in some nuts. Got some furniture to refinish and repurpose to raise cash, glad yard and estate sale season is back in swing. Also tilled, cut up some firewood and other stuff for the head cook and veggie grower.

[G&R's57GMC]

A 'Snuggy' works great , and its stronger, just add resin then, Bondo no need to add fiberglass.

[OrrieG]

Originally Posted by G&R's57GMC

A 'Snuggy' works great , and its stronger, just add resin then, Bondo no need to add fiberglass.

Yeah, but then your wife is PO'd because she is cold...