Tootsie build for my mother with cancer - Page 69 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

toocrazy · 12-09-2012, 10:56 PM

Eric, I want to pick your brain on something since you have done so many of these trucks. When you cut the radius in inner bed liner for tire clearance, how do you handle finishing the gap between the inner and outer bed? thanks

djw32 · 12-10-2012, 04:05 AM

Are those gauges compatible with the LS motor? They look darn good.
Posted via Mobile Device

**superflysteiny** · 12-10-2012, 12:30 PM

Thanks guys for everyone that has reached out to me on the shirts. I thought it would be a lot easier to just have the shirts made but because my trucks image is not in a vector file it has to be redone. So that is the reason for the delay. Please try to have patience with me as this is the first time doing something like this. Thanks

**superflysteiny** · 12-10-2012, 12:34 PM

Quote:

Originally Posted by toocrazy

Eric, I want to pick your brain on something since you have done so many of these trucks. When you cut the radius in inner bed liner for tire clearance, how do you handle finishing the gap between the inner and outer bed? thanks

If the truck is painted already I would just cut the inner bed wall smooth is with the die grinder and use a base coat on a pin stripe brush to paint in the edge. If the truck is not painted I will build sheet metal boxes that are welded to the inner bed panel. I dont have any pics but delmo and n2built have pics of some on there builds. Hope this helps.

Quote:

Originally Posted by djw32

Are those gauges compatible with the LS motor? They look darn good.
Posted via Mobile Device

Yes they have there own sending units that go to the block and then to the gauges. Hope this helps

**superflysteiny** · 12-10-2012, 12:36 PM

Sorry for not having pics but the truck is at Novelli Rod and customs getting the inner fenders built. I will be up there tonight and I will take dome pics. I am in the process of building the the rear bumper brackets.

duallyjams · 12-10-2012, 11:24 PM

Quote:

Originally Posted by superflysteiny

Thanks guys for everyone that has reached out to me on the shirts. I thought it would be a lot easier to just have the shirts made but because my trucks image is not in a vector file it has to be redone. So that is the reason for the delay. Please try to have patience with me as this is the first time doing something like this. Thanks

We will all still be here when they are ready.

**superflysteiny** · 12-11-2012, 02:08 PM

Thank you

**superflysteiny** · 12-14-2012, 12:13 AM

So truck is at Novelli rod and customs. The inner fender patterns are being mocked in card board. I built the rear bumper mounts today and got the bumpers mounted. Also event and took some pictures of the kick panels being built by audiosports in Folsom ca

Posted via Mobile Device

**superflysteiny** · 12-14-2012, 12:15 AM

Raised bed floor on gmc

Posted via Mobile Device

**superflysteiny** · 12-14-2012, 12:18 AM

Posted via Mobile Device

babyblueoval · 12-14-2012, 12:20 AM

It all looks great!

Zoomin · 12-14-2012, 12:32 AM

Eric, I hate to say this but I think those inner fenders need to be re-thought. They don't flow with your dimple died firewall and they don't work with the radiator support. You won't have much room for brake lines either. Other than those items, not bad.
Posted via Mobile Device

**superflysteiny** · 12-14-2012, 12:42 AM

Just wait till they are finished you will see they will be cool I promise. I am going to shave the dimples were the fenders go over. I promise we won't disappoint
Posted via Mobile Device

Zoomin · 12-14-2012, 12:46 AM

I have no doubt. I am not worthy to untie the thongs of your sandals.

I thought the GMC was going to be sold?

**superflysteiny** · 12-14-2012, 12:47 AM

Also he dimple dies on the core support will never be seen from the inside. They will only be seen from through the grille. The ones inside the motor compartment on the core will be smooth
Posted via Mobile Device

**superflysteiny** · 12-14-2012, 12:49 AM

Ha ha it is sold just helping my buddy out raising the bed for him
Posted via Mobile Device

*truckmanloco* · 12-14-2012, 01:00 AM

Quote:

Originally Posted by superflysteiny

Ha ha it is sold just helping my buddy out raising the bed for him
Posted via Mobile Device

Yeah you are

And please no one doubt Marios skill and eye for design the inner fenders are gonna be stellar.

Chvy2NV · 12-14-2012, 01:34 AM

Looking Great Eric.. Looks like your going with a more squarish design to the inner fenders as opposed to like a Slosh setup.. cant wait to see the final..
I really like the kick panels. are they metal or ABS ?

what happened with the

? Keep Grinding bro (no pun intended)

sduckworth13 · 12-14-2012, 01:38 AM

This is a great build , never seen anything like it on another truck, nice work

duallyjams · 12-14-2012, 08:54 AM

The inner fender is a spy pic so we can't see what it really looks like.

Rusbuilt · 12-14-2012, 09:46 AM

Nice as always! Did I miss something the GMC sold?

truckzilla · 12-14-2012, 01:44 PM

Quote:

Originally Posted by Zoomin

I have no doubt. I am not worthy to untie the thongs of your sandals.

That goes times a hundred for me!

**superflysteiny** · 12-15-2012, 12:52 AM

Quote:

Originally Posted by truckmanloco

Yeah you are

And please no one doubt Marios skill and eye for design the inner fenders are gonna be stellar.

Glad to sell you thr truck bro it will be sick when it's done

Quote:

Originally Posted by Chvy2NV

Looking Great Eric.. Looks like your going with a more squarish design to the inner fenders as opposed to like a Slosh setup.. cant wait to see the final..
I really like the kick panels. are they metal or ABS ?
The kick panels are glass with black paint on the glass. Super nice
what happened with the

? Keep Grinding bro (no pun intended)

I sold it to Travis truckmanloco. He has helped me in more ways then one on Tootsie he wanted it so I sold it to him. It's a gem I hate to see it go but it could not go to a better guy

Quote:

Originally Posted by sduckworth13

This is a great build , never seen anything like it on another truck, nice work

thank you

Quote:

Originally Posted by duallyjams

The inner fender is a spy pic so we can't see what it really looks like.

just wait till its in metal

Quote:

Originally Posted by Rusbuilt

Nice as always! Did I miss something the GMC sold?

ya truckmanloco bought it.

Quote:

Originally Posted by truckzilla

That goes times a hundred for me!

Ha ha you guys are crazy. I am just a dentist lol
Posted via Mobile Device

Chvy2NV · 12-15-2012, 08:11 PM

That's cool. At least you know it went to a good home. I'm sure we'll see it around here.
Posted via Mobile Device

texastrendz · 12-15-2012, 10:17 PM

I was wondering what Radiator you are using. I am running an LS motor with a Dropmember in the front. Any info would be great, Thanks Daniel.

12-09-2012, 10:56 PM	#1701
toocrazy Registered User Join Date: May 2008 Location: Florida Posts: 281	Re: Tootsie build for my mother with cancer Eric, I want to pick your brain on something since you have done so many of these trucks. When you cut the radius in inner bed liner for tire clearance, how do you handle finishing the gap between the inner and outer bed? thanks __________________ CHECK OUT MY 69 SLAMMED C10 BUILD 22/24's CHECK OUT MY 66 BURB BUILD 22's/24's Check out GodSpeed Rides on FACEBOOK

12-10-2012, 04:05 AM	#1702
djw32 Registered User Join Date: May 2006 Location: So.Cal Posts: 542	Re: Tootsie build for my mother with cancer Are those gauges compatible with the LS motor? They look darn good. Posted via Mobile Device

12-10-2012, 12:30 PM	#1703
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks guys for everyone that has reached out to me on the shirts. I thought it would be a lot easier to just have the shirts made but because my trucks image is not in a vector file it has to be redone. So that is the reason for the delay. Please try to have patience with me as this is the first time doing something like this. Thanks __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-10-2012, 12:36 PM	#1705
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Sorry for not having pics but the truck is at Novelli Rod and customs getting the inner fenders built. I will be up there tonight and I will take dome pics. I am in the process of building the the rear bumper brackets. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-11-2012, 02:08 PM	#1707
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thank you __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-14-2012, 12:13 AM	#1708
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer So truck is at Novelli rod and customs. The inner fender patterns are being mocked in card board. I built the rear bumper mounts today and got the bumpers mounted. Also event and took some pictures of the kick panels being built by audiosports in Folsom ca Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-14-2012, 12:15 AM	#1709
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Raised bed floor on gmc Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-14-2012, 12:18 AM	#1710
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-14-2012, 12:20 AM	#1711
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: Tootsie build for my mother with cancer It all looks great! __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

12-14-2012, 12:32 AM	#1712
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Tootsie build for my mother with cancer Eric, I hate to say this but I think those inner fenders need to be re-thought. They don't flow with your dimple died firewall and they don't work with the radiator support. You won't have much room for brake lines either. Other than those items, not bad. Posted via Mobile Device __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

12-14-2012, 12:42 AM	#1713
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Just wait till they are finished you will see they will be cool I promise. I am going to shave the dimples were the fenders go over. I promise we won't disappoint Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-14-2012, 12:46 AM	#1714
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: Tootsie build for my mother with cancer I have no doubt. I am not worthy to untie the thongs of your sandals. I thought the GMC was going to be sold? __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

12-14-2012, 12:47 AM	#1715
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Also he dimple dies on the core support will never be seen from the inside. They will only be seen from through the grille. The ones inside the motor compartment on the core will be smooth Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-14-2012, 12:49 AM	#1716
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Ha ha it is sold just helping my buddy out raising the bed for him Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

12-14-2012, 01:34 AM	#1718
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: Tootsie build for my mother with cancer Looking Great Eric.. Looks like your going with a more squarish design to the inner fenders as opposed to like a Slosh setup.. cant wait to see the final.. I really like the kick panels. are they metal or ABS ? what happened with the ? Keep Grinding bro (no pun intended)



Register or Log In To remove these advertisements.

12-14-2012, 01:38 AM	#1719
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Tootsie build for my mother with cancer This is a great build , never seen anything like it on another truck, nice work __________________ Scott

12-14-2012, 08:54 AM	#1720
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Tootsie build for my mother with cancer The inner fender is a spy pic so we can't see what it really looks like. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-14-2012, 09:46 AM	#1721
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Tootsie build for my mother with cancer Nice as always! Did I miss something the GMC sold? __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

12-15-2012, 08:11 PM	#1724
Chvy2NV Registered User Join Date: Apr 2012 Location: So. Florida Posts: 873	Re: Tootsie build for my mother with cancer That's cool. At least you know it went to a good home. I'm sure we'll see it around here. Posted via Mobile Device

12-15-2012, 10:17 PM	#1725
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: Tootsie build for my mother with cancer I was wondering what Radiator you are using. I am running an LS motor with a Dropmember in the front. Any info would be great, Thanks Daniel.

Register or Log In To remove these advertisements.