Finally "Silvers" build thread!! ('78 swb 2wd silverado) - Page 69 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC91 · 08-21-2010, 11:18 AM

Dennis, I envy the patience you have. Your truck is bad@ss...

**nlped** · 08-21-2010, 11:21 AM

Cool, I couldn't really tell from the picture. I'm really jealous of how great this thing is coming together!

joe231 · 08-21-2010, 11:45 AM

BEAUTIFUL!!!

when are you guys coming out here?

breeze85cten · 08-21-2010, 01:12 PM

What made you go with the RAAMat stuff instead of Dynamat? Im sure there isnt much difference in quality but just wondering. Also what did you use to roll it out so nicely on your floor. It looks great. I am going to be buying some soon as well for my c10. How much did it take?

menace121978 · 08-21-2010, 09:12 PM

thanks guys!! i used a roll of bxt and a case of bxtII. looks like its going to be perfect amount. We used ALOT! doubling up through all the seams. We used a wall paper roller to get it smoothed out and believe it or not some water proof tape for pipes on all the seams. you can get it at wally world. be sure to get at least 2 rolls. the tape is made out of the same stuff the ram mat is made out of. as for going with ram mat... just google it! tons of info and high praise on the stuff

i got a lot done today! column in with all new hardware. all the parts blasted and painted. cowl cover blasted and painted. locker shift linkage (PAIN IN THE ASS) installed and goes into ALL gears

also started on the wiring harness and finished installing the sending units for the ultra lite's!!

menace121978 · 08-21-2010, 09:13 PM

more

menace121978 · 08-21-2010, 09:15 PM

more...

menace121978 · 08-21-2010, 09:16 PM

few more...

menace121978 · 08-21-2010, 09:17 PM

last ones

STOCKISH · 08-21-2010, 09:59 PM

Looks sick. Absolutely sick.

54Caddy · 08-22-2010, 03:39 AM

the sound mat looks good.. Plan on doing mine soon with dynomat. Keep it up getting closer

mcbassin · 08-22-2010, 12:11 PM

Awesome progress! you are cooking now man!

JohnC · 08-23-2010, 09:51 AM

Wow you got a lot done! Looks awesome man!

silvereagle07 · 08-23-2010, 11:40 AM

Looks great man! Are you going to get a steering wheel to match the 225's (or at leat get close to it)?

draggin86 · 08-23-2010, 03:33 PM

maybe like this?

or

68 TT · 08-23-2010, 03:37 PM

Quote:

Originally Posted by menace121978

tomorrow i'll get the column bolted in, steering shaft cut and in, mount the a/c vacuum canister somewhere in the cowl out of sight, and a few other odds and ends. then it will be on to the painless wiring harness and installing the gauges

btw, the raam mat bxt is a great product. adheres like no other!!! kind of a mess and sticks like heck but other wise very nice.

Looks great, nice progress.

Are you going to put down the Ensolite IUO material as well?

Puglia10 · 08-23-2010, 03:50 PM

wow, awesome work....cant wait till mines at that point and now just a bare frame! mind me asking why the lokar linkage was such a PITA? any tips?

menace121978 · 08-23-2010, 04:15 PM

Quote:

Originally Posted by 1972SuperCheyenne

Looks sick. Absolutely sick.

Quote:

Originally Posted by 54Caddy

the sound mat looks good.. Plan on doing mine soon with dynomat. Keep it up getting closer

Quote:

Originally Posted by mcbassin

Awesome progress! you are cooking now man!

Quote:

Originally Posted by JohnC

Wow you got a lot done! Looks awesome man!

thanks guys!!!! i'm happy about it

Quote:

Originally Posted by silvereagle07

Looks great man! Are you going to get a steering wheel to match the 225's (or at leat get close to it)?

yes i'm pretty much being forced to by vvvv Mr. Baldwin there! i was going to go back to the original wheel that i had put away a few years back but....

Quote:

Originally Posted by draggin86

maybe like this?

or

im really liking the bottom one!!!

nice and clean

Quote:

Originally Posted by 68 TT

Looks great, nice progress.

Are you going to put down the Ensolite IUO material as well?

no, i've read that it holds moisture and i had just planned on going with factory insulation over custom open loop carpet. we will see though.

Quote:

Originally Posted by Puglia10

wow, awesome work....cant wait till mines at that point and now just a bare frame! mind me asking why the lokar linkage was such a PITA? any tips?

the rod for the linkage barely hit the brake booster brace on the firewall. then once i cleared that it was hitting on the o2 sensor that screws into the header collector. once i finally figured i couldn't get around the sensor i removed it then had to go back and forth with the adjustments (like 5+ different adjustment points) until finally it was dialed in and went from P R N OD D 2 1. just kicked my butt is all

JohnC · 08-24-2010, 08:19 AM

Yeah that bottom steering wheel gets my vote too. It will look awesome in the truck.

silvereagle07 · 08-24-2010, 11:03 AM

I like this wheel. Billet Specialties Chicayne.

menace121978 · 08-27-2010, 04:49 PM

thanks for that Jeramy! i like it

just need to see if it comes wrapped in grey.

i got a little done today. modded the column shaft a little and got the new steering shaft all painted up and installed. also went to the driveline services shop and ordered a custom built 3 1/2" driveshaft! here's a few pics of the steering...

menace121978 · 08-27-2010, 04:53 PM

just need to get the driveshaft painted and installed, buy brake booster and master cylinder and m/c brake lines, bleed, run wiring harness', and test drive!!

probably forgetting a few things though!

Btw, anyone have the brake booster vacuum adaptor for the intake part number?? i cant find it anywhere in my bookmarks.

breeze85cten · 08-27-2010, 05:33 PM

I just made a list for my truck as well and its a page long and even after that I keep on thinking of about a million things i need to do after the list! its never ending.

LiveAnimals · 08-27-2010, 06:15 PM

Want to take a brake and come swap out my column

mcbassin · 08-27-2010, 09:34 PM

Quote:

Originally Posted by menace121978

just need to get the driveshaft painted and installed, buy brake booster and master cylinder and m/c brake lines, bleed, run wiring harness', and test drive!!

probably forgetting a few things though!

Steering column looks great and functional!
Sorry I don't know the part number for the booster adapter (Bob where you at?).

What are you doing with the interior? all new too? Where are you getting the door panels, dash, etc.? Just curious how deep you are going with this monster? It's going to be too nice to drive man.....

thanks

08-21-2010, 11:18 AM	#1701
GMC91 Always trouble Join Date: Jul 2009 Location: Hartsellle, Al Posts: 1,111	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Dennis, I envy the patience you have. Your truck is bad@ss... __________________ 91 Silverado Regular cab, 2wd, swb-project truck 97 Silverado Extended cab, 2wd, swb-driver

08-21-2010, 11:21 AM	#1702
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Cool, I couldn't really tell from the picture. I'm really jealous of how great this thing is coming together! __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

08-21-2010, 11:45 AM	#1703
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) BEAUTIFUL!!! when are you guys coming out here? __________________ *CHEVY ONLY*

08-21-2010, 01:12 PM	#1704
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) What made you go with the RAAMat stuff instead of Dynamat? Im sure there isnt much difference in quality but just wondering. Also what did you use to roll it out so nicely on your floor. It looks great. I am going to be buying some soon as well for my c10. How much did it take?

08-21-2010, 09:12 PM	#1705
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) thanks guys!! i used a roll of bxt and a case of bxtII. looks like its going to be perfect amount. We used ALOT! doubling up through all the seams. We used a wall paper roller to get it smoothed out and believe it or not some water proof tape for pipes on all the seams. you can get it at wally world. be sure to get at least 2 rolls. the tape is made out of the same stuff the ram mat is made out of. as for going with ram mat... just google it! tons of info and high praise on the stuff i got a lot done today! column in with all new hardware. all the parts blasted and painted. cowl cover blasted and painted. locker shift linkage (PAIN IN THE ASS) installed and goes into ALL gears also started on the wiring harness and finished installing the sending units for the ultra lite's!! Attached Images __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

08-21-2010, 09:13 PM	#1706
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) more Attached Images __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

08-21-2010, 09:15 PM	#1707
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) more... Attached Images __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

08-21-2010, 09:16 PM	#1708
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) few more... Attached Images __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

08-21-2010, 09:17 PM	#1709
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) last ones Attached Images __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

08-21-2010, 09:59 PM	#1710
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Looks sick. Absolutely sick. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-22-2010, 03:39 AM	#1711
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) the sound mat looks good.. Plan on doing mine soon with dynomat. Keep it up getting closer __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

08-22-2010, 12:11 PM	#1712
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Awesome progress! you are cooking now man! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-23-2010, 09:51 AM	#1713
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Wow you got a lot done! Looks awesome man!

08-23-2010, 11:40 AM	#1714
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Looks great man! Are you going to get a steering wheel to match the 225's (or at leat get close to it)? __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

08-23-2010, 03:33 PM	#1715
draggin86 Registered User Join Date: Aug 2004 Location: Folsom, Ca Posts: 573	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) maybe like this? or



Register or Log In To remove these advertisements.

08-23-2010, 03:50 PM	#1717
Puglia10 Registered User Join Date: Apr 2009 Location: Boston MA Posts: 389	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) wow, awesome work....cant wait till mines at that point and now just a bare frame! mind me asking why the lokar linkage was such a PITA? any tips? __________________ 1979 c30 3+3 dually 1946 GMC

08-24-2010, 08:19 AM	#1719
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Yeah that bottom steering wheel gets my vote too. It will look awesome in the truck.

08-24-2010, 11:03 AM	#1720
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) I like this wheel. Billet Specialties Chicayne. Attached Images __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

08-27-2010, 04:49 PM	#1721
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) thanks for that Jeramy! i like it just need to see if it comes wrapped in grey. i got a little done today. modded the column shaft a little and got the new steering shaft all painted up and installed. also went to the driveline services shop and ordered a custom built 3 1/2" driveshaft! here's a few pics of the steering... Attached Images __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

08-27-2010, 04:53 PM	#1722
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) just need to get the driveshaft painted and installed, buy brake booster and master cylinder and m/c brake lines, bleed, run wiring harness', and test drive!! probably forgetting a few things though! Btw, anyone have the brake booster vacuum adaptor for the intake part number?? i cant find it anywhere in my bookmarks. __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

08-27-2010, 05:33 PM	#1723
breeze85cten Registered User Join Date: Jul 2010 Location: Gilbert, AZ Posts: 162	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) I just made a list for my truck as well and its a page long and even after that I keep on thinking of about a million things i need to do after the list! its never ending.

08-27-2010, 06:15 PM	#1724
LiveAnimals Registered User Join Date: Dec 2008 Location: Antelope, CA Posts: 681	Re: Finally "Silvers" build thread!! ('78 swb 2wd silverado) Want to take a brake and come swap out my column __________________ Kameron YESTERDAY IS HISTORY - TOMORROW IS A MYSTERY I'm a Middle ClASS HOLE 07.5 Dodge 3500 CTD -- Daily 73 C10 Factory BB SWB 2WD

Register or Log In To remove these advertisements.