** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 69 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

drewskiren · 09-20-2011, 01:38 AM

I shot the last coat of primer at 5 this afternoon, then wet-sanded with 600 grit, prepped and ready to shoot. Don't forget to run a TACK CLOTH over everything right before you shoot.

Another trick if you see a speck of dirt or fuzzy while you are spraying is to half pull the trigger and only shoot air out to try and blow the speck off the panel. This only works of course if you haven't already stuck him with paint.

drewskiren · 09-20-2011, 01:43 AM

Quote:

Originally Posted by 68greg

Drew, wow don't get on here for a couple of weeks and you redo a jeep and paint the cab of your truck and almost get the bed ready. And that cab......boy oh boy, looks like glass. Great job can't wait to see it when it's wet sanded and buffed. So when does the Drew's paint and body school open.

We'll start school with the 3 Ps. Prep-work, Patience, and Practice.

drewskiren · 09-20-2011, 01:45 AM

Oh heck, who am I kidding. I finished this too tonight.

VA72C10 · 09-20-2011, 02:10 AM

Looks great! Getting really excited to see this beast together!!!

70LonghornCST · 09-20-2011, 03:45 AM

Quote:

Originally Posted by 67cheby

actually i think you need to write your own article

He practically did. Nice Job...which is an understatement. You have to be as proud as (or close to) the day you had your first child.

**67cheby** · 09-20-2011, 09:25 AM

man ....you are the KING of GARAGE PAINT !!

drewskiren · 09-20-2011, 09:31 AM

Houston, we have a problem.

Giant run on one rear side and orange peel all down the other upper side. Looks like a redo tonight. I'll tape off everything else that looks good and be able to really concentrate on just the upper sides. I was feeling the pressure last night of so much stuff to paint at once.

**67cheby** · 09-20-2011, 09:44 AM

cant you just wet sand that out ??

**FL71C10** · 09-20-2011, 10:38 AM

Quote:

Originally Posted by drewskiren

We'll start school with the 3 Ps. Prep-work, Patience, and Practice.

Wax on, wax off! Just like the Karate Kid! Come down to Drew's Paint and Body school and he'll put you to work.

My shop teacher in high school used to do that. He would build hydraulic log splitters and the metal shop students would do the welding of the frames, the small engine shop students wouild rebuild the motors, and he would make the money! Smart guy!

drewskiren · 09-20-2011, 10:44 AM

Quote:

Originally Posted by 67cheby

cant you just wet sand that out ??

Yep, and I could then buff it down and pray I don't burn through the paint anywhere - or - since it is all taped up and so easy to spray....
The problem with counting on buffing is if you do burn through, you have to go back and completely retape/cover everything, blah, blah, blah = Nightmare.

**67cheby** · 09-20-2011, 10:59 AM

makes sense !

mcbassin · 09-20-2011, 11:19 AM

It's a real fine line between perfect wet coat and running on the floor. Sorry to see this happen to ya. Hope you have better luck on the second try.

drewskiren · 09-20-2011, 11:24 AM

Quote:

Originally Posted by mcbassin

It's a real fine line between perfect wet coat and running on the floor. Sorry to see this happen to ya. Hope you have better luck on the second try.

Ever tried to walk the edge of a razor blade????? Its about like that.

lyrikz · 09-20-2011, 11:25 AM

Quote:

Originally Posted by drewskiren

Houston, we have a problem.

Giant run on one rear side and orange peel all down the other upper side. Looks like a redo tonight. I'll tape off everything else that looks good and be able to really concentrate on just the upper sides. I was feeling the pressure last night of so much stuff to paint at once.

Drew, very easy to wetsand that out. Just use a solid bloc, and you will be fine. You should of seen the runs in my truck. HOrrific compared to yours. Mine was black and came out perfect.

wicky · 09-20-2011, 01:27 PM

I dnt know if this is ur first paint job or not but don't be scared of wet sanding and buffing. Especially a run cuz you've got to keep in mind that there's already to much paint there anyway. If you put three coats of clear on it you can do alot of sanding and buff before you burn through. Just my. 02 though.
Posted via Mobile Device

1985-GMC · 09-20-2011, 02:37 PM

^ Single stage, not base coat clear coat.

**oldman3** · 09-20-2011, 04:03 PM

Drew, have you ever used a painter nib file, their about 1-1/2" square and look like a file. Go over the run and it cut them down little by little, most paint supplies have them. I've also used a single edge razor blade, hold with both hands and drag over the run, it will also cut it down. Then wet sand and buff....Jim

drewskiren · 09-20-2011, 04:32 PM

Quote:

Originally Posted by oldman3

Drew, have you ever used a painter nib file, their about 1-1/2" square and look like a file. Go over the run and it cut them down little by little, most paint supplies have them. I've also used a single edge razor blade, hold with both hands and drag over the run, it will also cut it down. Then wet sand and buff....Jim

I have a nib file and a plastic device that holds a razor blade for you like you were saying. Can't find them right now though.

71Sleeper · 09-21-2011, 02:16 AM

I think Drew has got this guys....The proof is in the pudding, as one might say. Drew you are making great progress and I could only hope to be as detailed on my build as you are with Young Frankenstein. Can't wait to see this beast together. I log on everyday just to see the progress. Keep up the hard work.

jeffg1010 · 09-21-2011, 07:43 AM

Quote:

Originally Posted by 71Sleeper

I think Drew has got this guys .... The proof is in the pudding, as one might say.

Pop's C-10 · 09-21-2011, 09:36 AM

pudding..where

ERASER5 · 09-21-2011, 01:02 PM

Quote:

Originally Posted by Pop's C-10

pudding..where

Yea, but what flavor is BLUE?

**Dieselwrencher** · 09-21-2011, 04:05 PM

Hey, at least it was only on the upper areas! I hate it when you are spraying a long and then come back and see it ran! I tend to spray heavy and have to learn to walk away.

You'll get it Drew!

quandelgarage · 09-21-2011, 07:51 PM

looks sweet keep it up

FRENCHBLUE72 · 09-21-2011, 07:59 PM

Drew keep up the good work its almost there...

09-20-2011, 01:38 AM	#1701
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I shot the last coat of primer at 5 this afternoon, then wet-sanded with 600 grit, prepped and ready to shoot. Don't forget to run a TACK CLOTH over everything right before you shoot. Another trick if you see a speck of dirt or fuzzy while you are spraying is to half pull the trigger and only shoot air out to try and blow the speck off the panel. This only works of course if you haven't already stuck him with paint. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 09-20-2011 at 11:22 AM.

09-20-2011, 01:45 AM	#1703
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Oh heck, who am I kidding. I finished this too tonight. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 09-22-2011 at 12:37 AM.

09-20-2011, 02:10 AM	#1704
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks great! Getting really excited to see this beast together!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-20-2011, 09:25 AM	#1706
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. man ....you are the KING of GARAGE PAINT !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-20-2011, 09:31 AM	#1707
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Houston, we have a problem. Giant run on one rear side and orange peel all down the other upper side. Looks like a redo tonight. I'll tape off everything else that looks good and be able to really concentrate on just the upper sides. I was feeling the pressure last night of so much stuff to paint at once. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

09-20-2011, 09:44 AM	#1708
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. cant you just wet sand that out ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-20-2011, 10:59 AM	#1711
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. makes sense ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-20-2011, 11:19 AM	#1712
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. It's a real fine line between perfect wet coat and running on the floor. Sorry to see this happen to ya. Hope you have better luck on the second try. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

09-20-2011, 01:27 PM	#1715
wicky Registered User Join Date: Apr 2011 Location: knkxville iowa Posts: 186	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I dnt know if this is ur first paint job or not but don't be scared of wet sanding and buffing. Especially a run cuz you've got to keep in mind that there's already to much paint there anyway. If you put three coats of clear on it you can do alot of sanding and buff before you burn through. Just my. 02 though. Posted via Mobile Device

09-20-2011, 02:37 PM	#1716
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. ^ Single stage, not base coat clear coat. __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

09-20-2011, 04:03 PM	#1717
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,559	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew, have you ever used a painter nib file, their about 1-1/2" square and look like a file. Go over the run and it cut them down little by little, most paint supplies have them. I've also used a single edge razor blade, hold with both hands and drag over the run, it will also cut it down. Then wet sand and buff....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-21-2011, 02:16 AM	#1719
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I think Drew has got this guys....The proof is in the pudding, as one might say. Drew you are making great progress and I could only hope to be as detailed on my build as you are with Young Frankenstein. Can't wait to see this beast together. I log on everyday just to see the progress. Keep up the hard work. __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

09-21-2011, 09:36 AM	#1721
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. pudding..where __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

09-21-2011, 04:05 PM	#1723
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Hey, at least it was only on the upper areas! I hate it when you are spraying a long and then come back and see it ran! I tend to spray heavy and have to learn to walk away. You'll get it Drew! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-21-2011, 07:51 PM	#1724
quandelgarage Registered User Join Date: Jul 2011 Location: Kaukauna Wisconsin Posts: 92	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. looks sweet keep it up __________________ old school like your mother..... My Build--- Body dropped 67 service truck http://67-72chevytrucks.com/vboard/s...d.php?t=485504



Register or Log In To remove these advertisements.

09-21-2011, 07:59 PM	#1725
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew keep up the good work its almost there... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.