KS Parting a 72 super with tach, tilt, posi - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72 blue · 02-19-2015, 10:49 PM

Randy Paypal sent for my stuff......how about the headliner ? Pic #33
Thanks randy

teeitup · 02-19-2015, 10:53 PM

Curt, this one is good in this truck, no broken arms. $40 and I could ship with the steering wheel

Rick, $30 plus shipping, it would be high, I ship on a piece of plywood and then wrap in cardboard. It needs to stay flat, thats why I do it this way

Thanks Randy

**Curtb1971** · 02-19-2015, 10:59 PM

Randy, if you could take a couple pics of the unit that would be awesome.

teeitup · 02-19-2015, 11:00 PM

I will get some Fri evening, Thanks

72 blue · 02-19-2015, 11:10 PM

Quote:

Originally Posted by teeitup

Curt, this one is good in this truck, no broken arms. $40 and I could ship with the steering wheel

Rick, $30 plus shipping, it would be high, I ship on a piece of plywood and then wrap in cardboard. It needs to stay flat, thats why I do it this way

Thanks Randy

Randy
Let me know about shipping....thanks

Rick

bluek5 · 02-20-2015, 01:17 AM

Quote:

Originally Posted by teeitup

Pic for Paul

Randy,
It's a little hard to tell does that have the extra tab on the arm for the throttle cable? I will take the parts regardless. I am mainly after the deluxe throttle knob. Let me know a total and where you want the money sent.
Thanks, Paul

teeitup · 02-20-2015, 09:04 AM

Rick, sure will

Paul, yes it has the tab

Thanks Randy

Minnz · 02-20-2015, 12:15 PM

Quote:

Originally Posted by Minnz

I'll take the wire stands.

I am looking to try and replace all my clamps with original Wittek towers, the originals are so much better than the repops. So anything that you may have to complete a set, I'll most likely take.

Thanks for looking at the alternator. I am looking for an original Delco-Remy with a date code that would somewhat match up with date of my 72 Blazer's build date (October 1971). A Summer to Early Fall of 1971 date is perfect, but anything reasonably close will work too. I will get it re-built and have the aluminum housing re-skinned.

I am definitely hung-up on this originality thing!

Thanks,
Lee

Randy,

Any luck on finding some additional Wittek tower clamps?

Thanks,
Lee

teeitup · 02-20-2015, 02:18 PM

Minnz, Lee, I only have 2 towers. What alt are you needing? I have 2 more stock trucks coming in. Thanks

teeitup · 02-20-2015, 02:19 PM

Someone need this to make a bench for their shop. It has some bondo and some rust but would make some nice garage art

teeitup · 02-20-2015, 02:21 PM

67chevyredneck, I forgot I have one drivers rear patch panel out there

Max1775 · 02-20-2015, 02:48 PM

I'm interested in the AC box under the dash. I need one for my 72

teeitup · 02-20-2015, 02:52 PM

Max, $20 plus shipping for one, are you needing the heater core too? Or are you needing everything under dash? Thanks Randy

Max1775 · 02-20-2015, 02:57 PM

Quote:

Originally Posted by teeitup

Max, $20 plus shipping for one, are you needing the heater core too? Or are you needing everything under dash? Thanks Randy

Everything under the dash to 78003.

67ChevyRedneck · 02-20-2015, 04:12 PM

Quote:

Originally Posted by teeitup

67chevyredneck, I forgot I have one drivers rear patch panel out there

The whole back section or just the lower piece?

Minnz · 02-20-2015, 04:24 PM

Quote:

Originally Posted by teeitup

Minnz, Lee, I only have 2 towers. What alt are you needing? I have 2 more stock trucks coming in. Thanks

Randy,

My list so far:
The 2 spark plug wire stands
The 2 Wittek tower clamps

How much for the parking brake assembly?

I am looking for an original, stock Delco-Remy alt with a date stamp of mid to late 1971 (SBC truck)

Thanks

BLT gmc · 02-20-2015, 05:00 PM

Randy,
I have one (shop bench) made from a '83 C20 with the rear box part and the tailgate. I put the header panel back in it and mounted the entire package to the wall. Tail gate comes down for seat or bench. How much for the rear section and gate for a shop bench? Take care, Bruce

72 blue · 02-20-2015, 05:19 PM

Quote:

Originally Posted by teeitup

Minnz, Lee, I only have 2 towers. What alt are you needing? I have 2 more stock trucks coming in. Thanks

Randy, Im looking for nice grille and chrome bumper for my 72.....

Rick

teeitup · 02-20-2015, 06:09 PM

Max1775, I have everything. The divertor box I have works but the flapper is worn a bit. $50 plus shipping for all. Are you needing a AC control and cables too?

67chevyredneck, its the whole corner

Minnz, I have some other alts out there, they have been in the weather though. I have a 72 and 71 bought that are original. The park brake setup is $15 plus shipping

Bruce, its too big for me to ship, sorry. The gate is junk. It has some rust in pass rear quarter. $100 for the whole thing

Rick, this 71 I have bought has a nice grill in it and bumper, but shipping a grill is a pain and costly if it gets beat up in shipping

Thanks Randy

67ChevyRedneck · 02-20-2015, 06:13 PM

Great!

Pics? How much are you asking for it (I'm assuming it's a long bed)?

...and the biggie... how bad do you think shipping would be?

teeitup · 02-20-2015, 06:18 PM

I'll get pics, shipping would be high because of size. $30 for the panel. It was a LWB. Thanks Randy

**71blksuper4x4** · 02-20-2015, 06:20 PM

Randy, how bad was the floor of this cab from the seat mounting area back to the back of cab? Possibly thinking of redoing my way of doing the rear floor in my crew cab. I seen you had pics with the carpet still in. Thanks Trevor

teeitup · 02-20-2015, 06:24 PM

Trevor, I'll get pics

teeitup · 02-20-2015, 10:24 PM

Curt, its in good shape

teeitup · 02-20-2015, 10:25 PM

67chevyredneck

02-19-2015, 10:49 PM	#151
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting a 72 super with tach, tilt, posi Randy Paypal sent for my stuff......how about the headliner ? Pic #33 Thanks randy

02-19-2015, 10:53 PM	#152
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Curt, this one is good in this truck, no broken arms. $40 and I could ship with the steering wheel Rick, $30 plus shipping, it would be high, I ship on a piece of plywood and then wrap in cardboard. It needs to stay flat, thats why I do it this way Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-19-2015, 10:59 PM	#153
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,007	Re: Parting a 72 super with tach, tilt, posi Randy, if you could take a couple pics of the unit that would be awesome.

02-19-2015, 11:00 PM	#154
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi I will get some Fri evening, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 09:04 AM	#157
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Rick, sure will Paul, yes it has the tab Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 02:18 PM	#159
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Minnz, Lee, I only have 2 towers. What alt are you needing? I have 2 more stock trucks coming in. Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 02:19 PM	#160
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Someone need this to make a bench for their shop. It has some bondo and some rust but would make some nice garage art Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 02:21 PM	#161
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi 67chevyredneck, I forgot I have one drivers rear patch panel out there __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 02:48 PM	#162
Max1775 Registered User Join Date: Mar 2011 Location: Bandera, Texas Posts: 251	Re: Parting a 72 super with tach, tilt, posi I'm interested in the AC box under the dash. I need one for my 72

02-20-2015, 02:52 PM	#163
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Max, $20 plus shipping for one, are you needing the heater core too? Or are you needing everything under dash? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 05:00 PM	#167
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,106	Re: Parting a 72 super with tach, tilt, posi Randy, I have one (shop bench) made from a '83 C20 with the rear box part and the tailgate. I put the header panel back in it and mounted the entire package to the wall. Tail gate comes down for seat or bench. How much for the rear section and gate for a shop bench? Take care, Bruce

02-20-2015, 06:09 PM	#169
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Max1775, I have everything. The divertor box I have works but the flapper is worn a bit. $50 plus shipping for all. Are you needing a AC control and cables too? 67chevyredneck, its the whole corner Minnz, I have some other alts out there, they have been in the weather though. I have a 72 and 71 bought that are original. The park brake setup is $15 plus shipping Bruce, its too big for me to ship, sorry. The gate is junk. It has some rust in pass rear quarter. $100 for the whole thing Rick, this 71 I have bought has a nice grill in it and bumper, but shipping a grill is a pain and costly if it gets beat up in shipping Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 06:13 PM	#170
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Parting a 72 super with tach, tilt, posi Great! Pics? How much are you asking for it (I'm assuming it's a long bed)? ...and the biggie... how bad do you think shipping would be? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

02-20-2015, 06:18 PM	#171
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi I'll get pics, shipping would be high because of size. $30 for the panel. It was a LWB. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 06:20 PM	#172
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: Parting a 72 super with tach, tilt, posi Randy, how bad was the floor of this cab from the seat mounting area back to the back of cab? Possibly thinking of redoing my way of doing the rear floor in my crew cab. I seen you had pics with the carpet still in. Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever



Register or Log In To remove these advertisements.

02-20-2015, 06:24 PM	#173
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Trevor, I'll get pics __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 10:24 PM	#174
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi Curt, its in good shape Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-20-2015, 10:25 PM	#175
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 72 super with tach, tilt, posi 67chevyredneck Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.