Register or Log In To remove these advertisements. |
|
|
View Poll Results: How many of us would look at a "BIG TRUCK" Forum | |||
I have one of these and would post/look ALL THE TIME! | 142 | 28.92% | |
I don't own one but I would definitely look at a forum for something to drool over | 323 | 65.78% | |
I don't care, probably wouldn't ever even take a peek. | 26 | 5.30% | |
Voters: 491. You may not vote on this poll |
|
Thread Tools | Display Modes |
|
12-10-2011, 07:28 PM | #1 |
Registered User
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,081
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
Going a little off subject, I used to drive a '62 GMC 6500 (Similar to a C-80) back in the early and mid '70's. It had a 478 V-6, 5-Speed Trans, 2-Speed Rear, Air Brakes, 10-20 Tires on Spoke Wheels and a GVW of 32,000. They are pretty rare and to this day, I've never seen another one anywhere on the road. The only pictures I have seen are some factory brochure photos.
I've seen plenty of 5000's and saw at least one GMC B-Model 7500 in a junk yard, but never another 6500. Wondering if anyone out there has ever seen or driven one. I've heard there were some out in CA back in the day. Bill
__________________
'60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan |
03-08-2014, 06:42 AM | #2 | |
Registered User
Join Date: Feb 2014
Location: Pocahontas Arkansas
Posts: 684
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
Quote:
|
|
12-15-2011, 10:43 AM | #3 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
Not me.
Hey,about this thread and seeing if there's a demand for a medium & heavy GM truck forum. I guess it's going nowhere,huh? Like I've said before,if we took all the years and combined them,then threw in all the other GM built commercial vehicles that are not acknowledged on this site,I think we'd have a worthwhile forum. There's StepVans,El Caminos,Sedan Deliveries,Greenbriars /Corvair90s,buses,special bodies,RVs,military,foreign GM companies,and probably others I'm over looking. This thread and it's original purpose has been lost in the back pages. What will it take to get something going? The same was true with pre-47s and we finally gave them a forum. It may not be the busiest forum but it sure earns it's keep. I'd have -plenty to post if there was such a forum. I post this stuff in the pickup forum and it disappears,but also the mind set there is largely narrowed to specific interest even in light trucks. I can see the forum I'm talking about being for all truck of working nature,even LTs.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
12-15-2011, 11:50 AM | #4 |
Registered User
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,081
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
I too would be a frequent participant. It would be nice if we could have a trial run. The posts we have on Medium and Heavy Trucks in the regular forums does a lot of responses.
I'm a member of Heavy Trucks on another forum. As great as it is, it is All trucks and only gets Chev and GMC activity now and then. I'm also a member of another site, and as great as that one is, it doesn't have the activity on it like we do here. Especially pictures. The pictures posted on this site are outstanding. Bill
__________________
'60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan |
04-08-2012, 02:09 PM | #5 | |
Registered User
Join Date: Feb 2011
Location: Orient, Oregon
Posts: 722
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
Quote:
Here's my 4000 GMC....recent addition. Nicer than most lt duty trucks...including my own.
__________________
Les Hunter '59 3803 someday to be 3853 '63 GMC K1000...351E, TH400 Daily '66 GMC 4000...351C, 5&2 |
|
04-08-2012, 02:15 PM | #6 |
Registered User
Join Date: Feb 2011
Location: Orient, Oregon
Posts: 722
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
And a great LCF '55 chev that I spotted on CL.
The guy wants $4500....says it'll be at the PDX swap meet later this month if he doesn't sell it first. It looks to me like it might be a sweet old ride. Wish it was closer...(Salem), I'd go check it out. Oh well....the swap meet's only a week or so.
__________________
Les Hunter '59 3803 someday to be 3853 '63 GMC K1000...351E, TH400 Daily '66 GMC 4000...351C, 5&2 |
12-15-2011, 11:58 AM | #7 |
Registered User
Join Date: Nov 2001
Location: Moneta, VA USA
Posts: 3,081
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
Tim,
Here is a picture of a GMC 6500 that someone posted on a truck site for me the other day. Although in rough shape, it is the only non-factory picture of one that I know of online: This one is either a '64 or '65 Model. (Click onto the Topic at the top of it to open if necessary). Bill
__________________
'60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan |
03-17-2012, 12:00 PM | #8 |
Registered User
Join Date: Oct 2009
Location: Salvisa, Ky
Posts: 131
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
My latest projects.
|
08-13-2014, 09:36 AM | #9 |
Registered User
Join Date: Oct 2012
Location: Elmira NY/Palm Beach FL
Posts: 69
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
yep... wrap a chain around all wanna be trucks...
"I like the way you think" (Sam Kinison in back to School)
__________________
--------------------------------------------------------------------------- 72 GMC K5500 Napco 4x4 8V71/RTO-9513/T-1138 71 Corvette Wide Body 502 Ramjet 83 HD XR1000, 99 HD XL1200S, 84 YAM RZV500R 05 MB E55 AMG, 12 45th Camaro SS stick vert |
01-14-2015, 10:43 AM | #10 |
Registered User
Join Date: Jan 2015
Location: Auburn California
Posts: 15
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
Here's my '62 C50 wrecker. It has the original 283/4sp-2sp rear. Actually looking for a master cylinder for it if anyone knows where to find one and other parts for these cool old trucks! I'm also looking for good tire prices on 8R 22.5 both recaps for the rear and either good used or affordable new for the front.
It has an in dash tachometer.. Is that pretty common in these? |
01-14-2015, 08:29 PM | #11 | |
Registered User
Join Date: Jun 2006
Location: Lutz, Florida
Posts: 838
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
Quote:
__________________
1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour |
|
03-17-2012, 02:04 PM | #12 |
Registered User
Join Date: Jul 2006
Location: the netherlands europe
Posts: 4,335
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
maibe an idea for the next project to use a single wheel bed and use a couple of front fenders mounted the same way as in the front it would lower them to about equal , might look even better
__________________
i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts |
04-05-2012, 08:05 AM | #13 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
brakes on a 66 C60
I picked up a nice 66 60 series, (pics when I get it home).
As far as I could tell the master cylinder is bad.. the floor mat is all stained from the fluid, and the m/c was empty.. -the truck sat for 4 years, and judging by the empty brake fluid bottles on the seat, the brakes probably wern't too hot 4 years ago either! the master cylinder is similar to a 60-62 c 10, the truck has a hydraulic clutch. I have a new m/c on order, and will bench bleed it before go out to the ranch to install it. which do I bleed first? clutch or brakes? the system has a hydrovac unit under the cab, I think it is a vacuum booster and a slave cylinder, it also looks to be connected to the power steering pump. the rear wheels have 2 wheel cylinders each, but it looks like only one bleeder on each side. any tips /instructions/ pionters would be a great help!
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
04-05-2012, 10:13 PM | #14 | |||
Kid's Mechanic
Join Date: Nov 2006
Location: Kansas City
Posts: 8,241
|
Re: brakes on a 66 C60
Quote:
Quote:
Quote:
|
|||
04-05-2012, 10:22 PM | #15 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: brakes on a 66 C60
thanks, that will help, unfortunately it is out on a farm 70 miles from town, so I am going to bleed the old fashioned way..
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
04-05-2012, 10:24 PM | #16 |
Kid's Mechanic
Join Date: Nov 2006
Location: Kansas City
Posts: 8,241
|
Re: brakes on a 66 C60
Hydro vac should have bleeder screws on it too
|
04-05-2012, 10:27 PM | #17 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: brakes on a 66 C60
hmmm so in order from distance from m/c bleed, RR,LR,RF, LF, Then hydrovac?
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
04-05-2012, 10:57 PM | #18 |
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,270
|
Re: brakes on a 66 C60
If I remember right, Jon the slave at the bottom has a bleeder type screw on it .crack it open and get a old squirt can with brake fliud in it and pump up then the air will push back the line and come out the top of thew m/c [slave cyl] I have tried to bleed them in the conventional manner and just get no results and nothing but frustrated. I had an old [real old]chevy tec teach me that trick way long time ago. I would still bench bleed it and you may want to try the regular method to bleed . just keep that tip in mind if you run into trouble. At some point I will have to put a wheel cylinder on the right rear of my 64 c60.
|
04-08-2012, 01:59 PM | #19 | |
Registered User
Join Date: Feb 2011
Location: Orient, Oregon
Posts: 722
|
Re: brakes on a 66 C60
Quote:
I just have to pipe up on this one... If you haven't already dealt with it, there is a pretty easy process that I use. I've revived quite a few of the old ones, and since they, more often than not, have very old fluid in the system that has lost it's technical properties, I just "flush and bleed" at the same time. It doesn't take two people either. First, get a quart or two of your DOT 3 or 4 and a handfull of new bleeders if you have or can get some.....and fill the reservoir. Get down there and start crackin bleeders....and leave them all cracked open. Start at the close corner and pull the old bleeder out. Throw it if ya have a replacement or clean it if not. Just let the fluid dribble for a few and replace the bleeder almost seated...look fer bubbles...if there aren't any, tighten it and move to the next one down the line...repeat and so on..When the fluid runs out with no bubbles...tighten it an move on. Remember to keep the reservoir full....you will go through quite a bit of fluid fairly quickly. The idea behind starting at the close corner instead of the far one is that between the proportioning valve (if ya have one) and any Tees or such you have the chance of harboring a few air bubbles that do not get out the rear if you cork it first. Any way....I've done it this way since my old Truck Shop Foreman (Frank Barringer R.I.P.) taught me how in 1980, and without a power bleeder or an extra body....it just works great. There are a few systems that don't like to be "gravity bled".....but these old rigs respond well to it......plus you end up with a system full of fresh fluid.
__________________
Les Hunter '59 3803 someday to be 3853 '63 GMC K1000...351E, TH400 Daily '66 GMC 4000...351C, 5&2 |
|
04-07-2012, 04:30 PM | #20 |
Kid's Mechanic
Join Date: Nov 2006
Location: Kansas City
Posts: 8,241
|
Re: brakes on a 66 C60
Master , Hydro vac ,then the 4 corners
|
04-07-2012, 06:18 PM | #21 |
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: brakes on a 66 C60
furthest point from the m/c, then work the next furthest until you hit the closest bleeder. sometimes with those old hydrovacs the diaphram cracks in them and leaks, so you may not get any assist from it
ron |
04-07-2012, 08:35 PM | #22 |
1961 crewcab
Join Date: Dec 2007
Location: missoula, mt
Posts: 6,164
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
will the system still work if the diaphram is leaky? main thing i need to do for now is get it home, which is about 30 miles of 2 lane , and then 40 miles of interstate...
__________________
60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955 |
04-07-2012, 09:45 PM | #23 |
Registered User
Join Date: Feb 2008
Location: Sidney,b.c.
Posts: 4,425
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
should be just a power brake system with a bad diaphram in it. not saying that it is faulty but there is a good possibility. you may get lucky. it has been 40 years since I sold a diaphram for one of those. can't remember whether or not that they had a hole in them or not. I have a leaning that they didn't but took the same style as a maxi-pot on a truck air brake system, but were smaller than the std maxi-pot size which were 7 or 8"(which any truck shop would have
ron |
04-08-2012, 05:54 PM | #24 |
Registered User
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
This is what I just purchased, will be bringing home in a cpl weeks
|
04-08-2012, 11:05 PM | #25 |
Registered User
Join Date: Feb 2011
Location: Orient, Oregon
Posts: 722
|
Re: "BIG" truck forum C/40, C/50, C/60 and the like...
Ya baby....
__________________
Les Hunter '59 3803 someday to be 3853 '63 GMC K1000...351E, TH400 Daily '66 GMC 4000...351C, 5&2 |
Bookmarks |
|
|