Power Steering Adapter Plates - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mannyb. · 07-15-2011, 02:59 PM

wait im confused. what holes do you have to drill out?

**Captainfab** · 07-16-2011, 12:43 AM

There is a bracket that attaches the idler arm, as shown in that pic, to the frame. It mounts to the frame differently than the '63-'66 bracket. Therefore you need to locate it and drill new holes. It is really quite simple to do.

GMC66 · 08-08-2012, 10:40 PM

Captainfab, you have a PM. Thanks.
Posted via Mobile Device

mannyb. · 07-15-2011, 02:56 PM

k cool. thanks for the advice!

**chev-obsession** · 07-16-2011, 12:44 AM

Whanks for the fast shipping! its a great product!

I bought the new steering coupler, What do i need to do for a rag joint?

**Captainfab** · 07-16-2011, 01:45 AM

If your steering box doesn't have one on it, you will need the correct one for that box. There are 3 different sizes/splines on the input shaft. There are 2 different splines on a 3/4" shaft, and then a 13/16" diameter shaft. A Napa store might be your best bet at finding someone that can figure it out and get you what you need. If you happen to know what year your steering box is, that will be a big help.

Quote:

Originally Posted by chev-obsession

Whanks for the fast shipping! its a great product!

I bought the new steering coupler, What do i need to do for a rag joint?

66 lwb cs · 07-24-2011, 09:52 PM

Haven't had a chance to install yet but part looks great recieved it quick and nice directions. Thanks Captain.

gtonut1970 · 07-29-2011, 05:42 PM

i would like one too, please pm me with purchase info, thanks

**Captainfab** · 07-29-2011, 11:48 PM

PM sent....thanks

blitzen6965 · 08-02-2011, 09:24 PM

Hey Cpt. Sent you a PM a little earlier today. New member and looking to get one of your ps adapters. Thanks

**Captainfab** · 08-02-2011, 11:10 PM

I replied to your PM.........

Quote:

Originally Posted by blitzen6965

Hey Cpt. Sent you a PM a little earlier today. New member and looking to get one of your ps adapters. Thanks

LostMy65 · 08-02-2011, 11:56 PM

Quote:

Originally Posted by blitzen6965

Hey Cpt. Sent you a PM a little earlier today. New member and looking to get one of your ps adapters. Thanks

Welcome to the forums.
Posted via Mobile Device

**pdxhall** · 08-29-2011, 06:53 PM

With so many different variations that guys are using for the conversion I'm still just a little confused. Can I use the the original 66 idler arm and steering linkage with a 79 pitman arm or do I need to make other changes. I will be ordering the adapter plate soon and I just want to know where I stand on this conversion. Thank, Brett

LostMy65 · 08-29-2011, 07:59 PM

You can keep everything and just install the powersteering box with its pitman arm:
All linkage and idler arm can remain.
Here is my conversion:
http://67-72chevytrucks.com/vboard/s...d.php?t=438509
The template I made is now included with Captain's Adapter Plate.

**Captainfab** · 08-29-2011, 11:47 PM

If you are keeping the drum brakes, then you can keep the original draglink, idler arm, and tie rods. If you are converting to discs, then if you keep your original steering linkage, you will need to change at least the outter tie rods. There is an off the shelf tie rod that allows you to do this without the need for the expensive adapter sleeves, but I don't have that part number. You might try posting the question, here on the forum, Someont here posted the number not long ago. I wasn't concerned with it, as I always change all the steering linkage to the later model components. That requires locating and drilling new holes for the idler are though. It isn't difficult if you just take your time and use the original for a reference.

**pdxhall** · 08-30-2011, 12:15 AM

Quote:

Originally Posted by LostMy65

You can keep everything and just install the powersteering box with its pitman arm:
All linkage and idler arm can remain.
Here is my conversion:
http://67-72chevytrucks.com/vboard/s...d.php?t=438509
The template I made is now included with Captain's Adapter Plate.

Thanks for the information. That's what I was hoping. I already have new 2 1/2" drop spindles, new tie rod ends and adjusters, and the idler arm and steering linkage installed. I temporarily put the stock manual gear on so I could manuver the truck to work on it. Right now I'm in the process of redoing the rear of the frame and suspension.

Capt., I'll be ordering your adapter as soon as I finish up the rear suspension upgrades. Thanks, Brett

Slowtruk · 09-06-2011, 05:51 PM

Hey john, as you knowI bought this bracket from you a week ago (looks very high quality btw) and I was just wondering, will this fit 60-66? I originally bought it for 65 but I need another one fr 61. Thanks!

**Captainfab** · 09-06-2011, 11:59 PM

The current adapter plate works only on the '63-'66's. I have been wanting to design one for the '60-'62's but just haven't had time.

Quote:

Originally Posted by Slowtruk

Hey john, as you knowI bought this bracket from you a week ago (looks very high quality btw) and I was just wondering, will this fit 60-66? I originally bought it for 65 but I need another one fr 61. Thanks!

Harley1650 · 09-06-2011, 08:23 PM

I just sent payment! Maybe there outa be a cowbell every time one is sold!

Slowtruk · 09-06-2011, 08:35 PM

Quote:

Originally Posted by Harley1650

I just sent payment! Maybe there outa be a cowbell every time one is sold!

bryankichler · 09-14-2011, 08:49 PM

Received mine today super fast shipping and quality product

**Captainfab** · 09-14-2011, 11:07 PM

Thanks for the compliment Bryan

Quote:

Originally Posted by bryankichler

Received mine today super fast shipping and quality product

bryankichler · 09-15-2011, 08:30 AM

Id feel better if that was the case I have all the time in the world right now. Going through demobilization trying to get back home lots planned once I get there. Build thread is coming.

Harley1650 · 09-26-2011, 05:27 PM

Another satisfied customer of Captainfabs plate. The truck is at the shop getting aligned after completing power disc brakes, new suspension, and now POWER STEERING!!!! The only thing I would suggest is not messing with pre made hoses. That was the worst part of the job. I should have just had them made........

**Captainfab** · 09-27-2011, 12:50 AM

Thanks for the kind words

07-15-2011, 02:59 PM	#1
mannyb. Registered User Join Date: May 2010 Location: brea, cali Posts: 171	Re: Power Steering Adapter Plates wait im confused. what holes do you have to drill out? Attached Images __________________ 1963 LWB C10. tired 230. soon to be sbc350!!!! i just wanna go fast!! shake & bake, baby

07-16-2011, 12:43 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Steering Adapter Plates There is a bracket that attaches the idler arm, as shown in that pic, to the frame. It mounts to the frame differently than the '63-'66 bracket. Therefore you need to locate it and drill new holes. It is really quite simple to do. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-08-2012, 10:40 PM	#3
GMC66 Registered User Join Date: Jun 2012 Location: Science Hill, Kentucky Posts: 180	Re: Power Steering Adapter Plates Captainfab, you have a PM. Thanks. Posted via Mobile Device

07-15-2011, 02:56 PM	#4
mannyb. Registered User Join Date: May 2010 Location: brea, cali Posts: 171	Re: Power Steering Adapter Plates k cool. thanks for the advice! __________________ 1963 LWB C10. tired 230. soon to be sbc350!!!! i just wanna go fast!! shake & bake, baby

07-16-2011, 12:44 AM	#5
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,511	Re: Power Steering Adapter Plates Whanks for the fast shipping! its a great product! I bought the new steering coupler, What do i need to do for a rag joint? __________________ 1965 c/10 swb 1969 c/10 lwb

07-24-2011, 09:52 PM	#7
66 lwb cs Registered User Join Date: Apr 2011 Location: aurora co Posts: 208	Re: Power Steering Adapter Plates Haven't had a chance to install yet but part looks great recieved it quick and nice directions. Thanks Captain. __________________ 66 C20 LWB CS 327/TH400 A/C

07-29-2011, 05:42 PM	#8
gtonut1970 Registered User Join Date: Jul 2011 Location: amity arkansas Posts: 4	Re: Power Steering Adapter Plates i would like one too, please pm me with purchase info, thanks

07-29-2011, 11:48 PM	#9
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Steering Adapter Plates PM sent....thanks __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-02-2011, 09:24 PM	#10
blitzen6965 Registered User Join Date: Aug 2011 Location: Madison, AL Posts: 1	Re: Power Steering Adapter Plates Hey Cpt. Sent you a PM a little earlier today. New member and looking to get one of your ps adapters. Thanks

08-29-2011, 06:53 PM	#13
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,079	Re: Power Steering Adapter Plates With so many different variations that guys are using for the conversion I'm still just a little confused. Can I use the the original 66 idler arm and steering linkage with a 79 pitman arm or do I need to make other changes. I will be ordering the adapter plate soon and I just want to know where I stand on this conversion. Thank, Brett

08-29-2011, 07:59 PM	#14
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,527	Re: Power Steering Adapter Plates You can keep everything and just install the powersteering box with its pitman arm: All linkage and idler arm can remain. Here is my conversion: http://67-72chevytrucks.com/vboard/s...d.php?t=438509 The template I made is now included with Captain's Adapter Plate. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

08-29-2011, 11:47 PM	#15
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Steering Adapter Plates If you are keeping the drum brakes, then you can keep the original draglink, idler arm, and tie rods. If you are converting to discs, then if you keep your original steering linkage, you will need to change at least the outter tie rods. There is an off the shelf tie rod that allows you to do this without the need for the expensive adapter sleeves, but I don't have that part number. You might try posting the question, here on the forum, Someont here posted the number not long ago. I wasn't concerned with it, as I always change all the steering linkage to the later model components. That requires locating and drilling new holes for the idler are though. It isn't difficult if you just take your time and use the original for a reference. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-06-2011, 05:51 PM	#17
Slowtruk Registered User Join Date: Aug 2011 Location: Lumberton Texas Posts: 378	Re: Power Steering Adapter Plates Hey john, as you knowI bought this bracket from you a week ago (looks very high quality btw) and I was just wondering, will this fit 60-66? I originally bought it for 65 but I need another one fr 61. Thanks! __________________ IBEW Electrician-Nick 1985 C20 Silverado 1965 C-10 short fleet 1961 c-10 Apache short fleet 2005 Chevy Suburban LT 2012 Hyundai Sonata

09-06-2011, 08:23 PM	#19
Harley1650 1963 C-10 BBC/Muncie 4 spd Join Date: Feb 2008 Location: White Lake, Michigan Posts: 170	Re: Power Steering Adapter Plates I just sent payment! Maybe there outa be a cowbell every time one is sold!

09-14-2011, 08:49 PM	#21
bryankichler Registered User Join Date: Dec 2010 Location: Pittsburg, KS Posts: 54	Re: Power Steering Adapter Plates Received mine today super fast shipping and quality product



Register or Log In To remove these advertisements.

09-15-2011, 08:30 AM	#23
bryankichler Registered User Join Date: Dec 2010 Location: Pittsburg, KS Posts: 54	Re: Power Steering Adapter Plates Id feel better if that was the case I have all the time in the world right now. Going through demobilization trying to get back home lots planned once I get there. Build thread is coming.

09-26-2011, 05:27 PM	#24
Harley1650 1963 C-10 BBC/Muncie 4 spd Join Date: Feb 2008 Location: White Lake, Michigan Posts: 170	Re: Power Steering Adapter Plates Another satisfied customer of Captainfabs plate. The truck is at the shop getting aligned after completing power disc brakes, new suspension, and now POWER STEERING!!!! The only thing I would suggest is not messing with pre made hoses. That was the worst part of the job. I should have just had them made........

09-27-2011, 12:50 AM	#25
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Steering Adapter Plates Thanks for the kind words __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

Register or Log In To remove these advertisements.