60-66 Tire/Wheel Pics - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chvyman1975 · 09-10-2011, 12:39 AM

62 with 22" Kaotics. 2" adaptors up front. spacers in the back.

Blue666 · 09-11-2011, 03:48 AM

Here is my 66 with Factory alloy wheel from a 2000 Tahoe. I used 2" aluminum spacers ordered from an ebay vendor. Told him what hub/axle I had & what wheel I was using & he made sure they fit right the first time. Included correct new studs & lug nuts plus correct old lug nuts.

I'm running BFG 235/70 x 16 tires. No Rubbing anywhere.

kieth · 09-12-2011, 09:25 AM

17" cragars 9" wide , 235 65 r17 front

rear 265/70 r 17 barely clear.......

http://kieth.smugmug.com/Trucks/66-G..._VNTtdTm-XL-LB

Howell88 · 09-12-2011, 12:55 PM

Mine theyre 15 by 8 on back wrapped in hankook ventus, new and 15 by 5? on front with bad used goodyears. I plan for white walls and rallys some day though!

Posted via Mobile Device

Genuine GM · 09-12-2011, 01:53 PM

Scot_Douglas

Are you running adapters on the Camaro wheels or has you truck been changed to 4-3/4 bolt pattern?

I like them. I have 5 on 5 in the front of mine and 6 lug in the back, but I have a 9 inch ready to go in the back that is 5 on 4-3/4".

If this works, I have attached a picture with aluminum mags, 6 lug and a picture of how it sits now with 5 lug rally's in the front. It needs to come down another couple of inches.

Scot_Douglas · 09-13-2011, 01:06 PM

Quote:

Originally Posted by Genuine GM

Scot_Douglas

Are you running adapters on the Camaro wheels or has you truck been changed to 4-3/4 bolt pattern?

I'm running two different pairs of adapters.

Front, I have the 5x5" disc brake upgrade and chose an adapter that went to 5x120mm and was 1.5" (38mm) thick to account for the 39mm camaro offset.

Rear, I have a Tbird SC IRS setup with discs. It's 64" wms-to-wms, so I chose the thinnest adapter (1") I could to try to keep the wheels inside the fenders.

This pic shows the stance a bit better:

I lucked out.

**Clyde65** · 09-12-2011, 02:11 PM

I decided to get my ralley's powder coated, so here is the difference, not mounted yet.

markeb01 · 01-13-2012, 11:04 PM

Since post #6, my 15x5 front wheels were replaced with a pair of 15x7’s that match the rear:

SNTOS63 · 01-14-2012, 12:07 AM

Yup those are badass! "The Pusher" inspired the skinny torques! Ha! Yours are exactly what I'm going for, but in a 15x5.
Posted via Mobile Device

1Bad62Pro/Street · 01-14-2012, 12:25 AM

Black Powder Coated Weld Racing Draglites

http://www.summitracing.com/search/Brand/Weld-Racing/

markeb01 · 01-14-2012, 01:44 AM

Quote:

Originally Posted by SNTOS63

Yup those are badass! "The Pusher" inspired the skinny torques! Ha! Yours are exactly what I'm going for, but in a 15x5.
Posted via Mobile Device

I still have the 15x5’s off my truck sitting in the basement. If you’re interested shoot me a PM. Here’s what they looked like on the truck. The spokes are currently painted black.

SNTOS63 · 01-25-2012, 01:23 PM

The new plan. 15x4.5 in front with 165/r15s & 15x7 in the rear with 275/60r15s!
Posted via Mobile Device

chevy_mike · 01-25-2012, 01:39 PM

Quote:

Originally Posted by SNTOS63

The new plan. 15x4.5 in front with 165/r15s & 15x7 in the rear with 275/60r15s!
Posted via Mobile Device

Got any better shots of the painted wheel? Like a streight on shot or better yet, on the truck? I'm liken' the look.

lowlife4life · 12-10-2013, 06:56 AM

24" boss 330. Horrible quality chrome gonna 2 tone powder coat to match truck and polish the lips. I've had the same style wheel on three different trucks now cause the clean very easy

kieth · 12-10-2013, 01:28 PM

Here are my 17 x 8 fronts---0 offset, 17 x 9 rear cragars---not sure of offset probably 4" Kieth

66 gmc

[IMG]66gmcstance.jpg[/IMG]

MALIBLOC · 02-14-2023, 09:50 AM

Quote:

Originally Posted by lowlife4life

24" boss 330. Horrible quality chrome gonna 2 tone powder coat to match truck and polish the lips. I've had the same style wheel on three different trucks now cause the clean very easy

would love to see the pictures of the rim on your other trucks or this truck , that's a killer rim style

Daking19 · 12-10-2013, 02:28 PM

Lowl!f3 · 06-04-2014, 10:28 PM

Quote:

Originally Posted by 62 Bowtie

15x7 Smoothies and wide whites

What size are those?

Quote:

Originally Posted by steve'62

15x8 cragar smoothies w/ push-thru bullet caps and 225/70/15 cokers, still planning on drop spindles, and maybe another inch drop or so in the rear

Where did you pick up the push through center caps? And what's the diameter of them?

SNTOS63 · 01-25-2012, 02:14 PM

I'll get some later today. I'm going to the tire shop to have the tires mounted and I'll post a few. Yeah I figured I'd make them resemble the old Halibrands. (but cheap status!) haha!
Posted via Mobile Device

chevy_mike · 01-25-2012, 02:17 PM

Quote:

Originally Posted by SNTOS63

I'll get some later today. I'm going to the tire shop to have the tires mounted and I'll post a few. Yeah I figured I'd make them resemble the old Halibrands. (but cheap status!) haha!
Posted via Mobile Device

Yeah they do!!! Sweet idea and I might have to borrow that one.

Definitely post pics!

chevyrestoguy · 01-25-2012, 02:21 PM

I'm diggin' the grey centers. I've always wanted to try that, so thanks for showing it off. I'm a huge fan of Halibrands, except for the price.

If there's any way, try to find an 8" rear wheel. It'll fit the -275s a bit better, IMO. I like where you're heading with this, though. To me, the big/little look says "Hot Rod".

SNTOS63 · 01-25-2012, 02:21 PM

Here's a shot of the front ones ready to mount...
Posted via Mobile Device
Posted via Mobile Device

markeb01 · 01-25-2012, 02:35 PM

Quote:

Originally Posted by SNTOS63

Here's a shot of the front ones ready to mount...

That combination looks fantastic. I'd suggest take your time getting used to making turns or doing any hard braking. 165x15’s were designed for VW’s and other small cars weighing nearly half as much as 60-66 trucks. The cool factor can be worth it, but the handling may be dramatically different than what you're currently familiar with.

SNTOS63 · 01-25-2012, 02:23 PM

Yup! Thanks I'll look out for the 15x8s. Good info!
Posted via Mobile Device

chevy_mike · 01-25-2012, 02:24 PM

Sweet!!!! They should look awesome on your truck!!!

09-10-2011, 12:39 AM	#1
Chvyman1975 Registered User Join Date: Feb 2007 Location: Winchester, CA Posts: 128	Re: 60-66 Tire/Wheel Pics 62 with 22" Kaotics. 2" adaptors up front. spacers in the back. Attached Images

09-11-2011, 03:48 AM	#2
Blue666 Registered User Join Date: Dec 2008 Location: Andrews, NC Posts: 194	Re: 60-66 Tire/Wheel Pics Here is my 66 with Factory alloy wheel from a 2000 Tahoe. I used 2" aluminum spacers ordered from an ebay vendor. Told him what hub/axle I had & what wheel I was using & he made sure they fit right the first time. Included correct new studs & lug nuts plus correct old lug nuts. I'm running BFG 235/70 x 16 tires. No Rubbing anywhere. Attached Images

09-12-2011, 09:25 AM	#3
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: 60-66 Tire/Wheel Pics 17" cragars 9" wide , 235 65 r17 front rear 265/70 r 17 barely clear....... http://kieth.smugmug.com/Trucks/66-G..._VNTtdTm-XL-LB

09-12-2011, 12:55 PM	#4
Howell88 Registered User Join Date: Sep 2011 Location: west plains missouri Posts: 70	Re: 60-66 Tire/Wheel Pics Mine theyre 15 by 8 on back wrapped in hankook ventus, new and 15 by 5? on front with bad used goodyears. I plan for white walls and rallys some day though! Posted via Mobile Device Attached Images __________________ just tell her its a work of art and will never really be FINISHED! If that doesnt cause a pause in her rant then you have real problems!

09-12-2011, 01:53 PM	#5
Genuine GM Registered User Join Date: May 2009 Location: Unincorporated County, TX Posts: 172	Re: 60-66 Tire/Wheel Pics Scot_Douglas Are you running adapters on the Camaro wheels or has you truck been changed to 4-3/4 bolt pattern? I like them. I have 5 on 5 in the front of mine and 6 lug in the back, but I have a 9 inch ready to go in the back that is 5 on 4-3/4". If this works, I have attached a picture with aluminum mags, 6 lug and a picture of how it sits now with 5 lug rally's in the front. It needs to come down another couple of inches. Attached Images __________________ Don't let my username fool you, I have become brand blind. Cool is cool, period. 1965 C-10 - "Whipping Post" 1958 Biscayne - "Ruby" 1961 IH Scout 80 - "Gaucho" (My wife's new project) 1938 Chevy - unstarted project.

09-12-2011, 02:11 PM	#7
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: 60-66 Tire/Wheel Pics I decided to get my ralley's powder coated, so here is the difference, not mounted yet. Attached Images __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

01-13-2012, 11:04 PM	#8
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: 60-66 Tire/Wheel Pics Since post #6, my 15x5 front wheels were replaced with a pair of 15x7’s that match the rear:

01-14-2012, 12:07 AM	#9
SNTOS63 Registered User Join Date: Jul 2009 Location: san bernardino, CA Posts: 116	Re: 60-66 Tire/Wheel Pics Yup those are badass! "The Pusher" inspired the skinny torques! Ha! Yours are exactly what I'm going for, but in a 15x5. Posted via Mobile Device

01-14-2012, 12:25 AM	#10
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: 60-66 Tire/Wheel Pics Black Powder Coated Weld Racing Draglites http://www.summitracing.com/search/Brand/Weld-Racing/ __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. Last edited by 1Bad62Pro/Street; 06-27-2012 at 11:21 AM.

01-25-2012, 01:23 PM	#12
SNTOS63 Registered User Join Date: Jul 2009 Location: san bernardino, CA Posts: 116	Re: 60-66 Tire/Wheel Pics The new plan. 15x4.5 in front with 165/r15s & 15x7 in the rear with 275/60r15s! Posted via Mobile Device Attached Images

12-10-2013, 06:56 AM	#14
lowlife4life Registered User Join Date: Jul 2013 Location: grande prairie alberta Posts: 324	Re: 60-66 Tire/Wheel Pics 24" boss 330. Horrible quality chrome gonna 2 tone powder coat to match truck and polish the lips. I've had the same style wheel on three different trucks now cause the clean very easy Attached Images

12-10-2013, 01:28 PM	#15
kieth Registered User Join Date: Sep 2010 Location: Tulsa, Oklahoma Posts: 1,925	Re: 60-66 Tire/Wheel Pics Here are my 17 x 8 fronts---0 offset, 17 x 9 rear cragars---not sure of offset probably 4" Kieth 66 gmc [IMG]66gmcstance.jpg[/IMG]

12-10-2013, 02:28 PM	#17
Daking19 Registered User Join Date: Oct 2012 Location: Surprise,Az Posts: 41	Re: 60-66 Tire/Wheel Pics

01-25-2012, 02:14 PM	#19
SNTOS63 Registered User Join Date: Jul 2009 Location: san bernardino, CA Posts: 116	Re: 60-66 Tire/Wheel Pics I'll get some later today. I'm going to the tire shop to have the tires mounted and I'll post a few. Yeah I figured I'd make them resemble the old Halibrands. (but cheap status!) haha! Posted via Mobile Device

01-25-2012, 02:21 PM	#21
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: 60-66 Tire/Wheel Pics I'm diggin' the grey centers. I've always wanted to try that, so thanks for showing it off. I'm a huge fan of Halibrands, except for the price. If there's any way, try to find an 8" rear wheel. It'll fit the -275s a bit better, IMO. I like where you're heading with this, though. To me, the big/little look says "Hot Rod". __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527



Register or Log In To remove these advertisements.

01-25-2012, 02:21 PM	#22
SNTOS63 Registered User Join Date: Jul 2009 Location: san bernardino, CA Posts: 116	Re: 60-66 Tire/Wheel Pics Here's a shot of the front ones ready to mount... Posted via Mobile Device Posted via Mobile Device Attached Images

01-25-2012, 02:23 PM	#24
SNTOS63 Registered User Join Date: Jul 2009 Location: san bernardino, CA Posts: 116	Re: 60-66 Tire/Wheel Pics Yup! Thanks I'll look out for the 15x8s. Good info! Posted via Mobile Device

01-25-2012, 02:24 PM	#25
chevy_mike Never Ending Projects Join Date: Jul 2006 Location: San Diego, CA Posts: 3,836	Re: 60-66 Tire/Wheel Pics Sweet!!!! They should look awesome on your truck!!! __________________ . 1965 C10 Panel, Tiki Express http://www.67-72chevytrucks.com/vboa...d.php?t=506580 SOLD 1968 Chevy C10, Long, Fleetside, Hot Rod Hauler http://67-72chevytrucks.com/vboard/s...d.php?t=313233 SOLD 1965 Chevy C10, Long, Fleetside, Hot Rod C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415702 SOLD We were given two ears and one mouth for a reason... listen twice as much and speak half as often...

Register or Log In To remove these advertisements.