Interest in aluminum hub knobs? - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GMCGrim** · 03-16-2018, 07:50 AM

Quote:

Originally Posted by DeadheadNM

Engraving possible? I'd like my dogs name engraved: Spicer

Not possible, sorry. Unless I want find myself in court. Wes from Classic Heartbeat had the same idea but when he contacted Dana/Spicer they wanted a substantial amount of money before production even began.

1972RedNeck · 03-18-2018, 07:32 PM

Quote:

Originally Posted by GMCGrim

Not possible, sorry. Unless I want find myself in court. Wes from Classic Heartbeat had the same idea but when he contacted Dana/Spicer they wanted a substantial amount of money before production even began.

How about the F word in a set of Red knobs...

**GMCGrim** · 03-18-2018, 07:54 PM

Quote:

Originally Posted by 1972RedNeck

How about the F word in a set of Red knobs...

I actually thought about having some anodized red but the shade of red that the anodizer has is not the same shade of red as the original Ford ones.

**special-K** · 03-19-2018, 09:48 PM

Ford and '70 GMs

Hinz28 · 04-15-2018, 11:17 PM

Message sent. Very interested in claiming a set in this recent batch your having made!

**undertaker72** · 04-16-2018, 06:53 AM

I would like to get on your list , for at least one pair , 2 if possible thank you

**GMCGrim** · 05-10-2018, 08:39 PM

Ok Guys the hubs should be ready in a couple of weeks then one week for the anodizer. There will be only ten sets made right now with the possibility of more later. The person making them is slammed with other projects. I hope this is not holding up the completion of any projects.

Old57 · 05-10-2018, 09:47 PM

Quote:

Originally Posted by GMCGrim

Ok Guys the hubs should be ready in a couple of weeks then one week for the anodizer. There will be only ten sets made right now with the possibility of more later. The person making them is slammed with other projects. I hope this is not holding up the completion of any projects.

I'd like a set for my truck. Do you sell the proper o-rings for them too?

**GMCGrim** · 05-10-2018, 10:24 PM

Quote:

Originally Posted by Old57

I'd like a set for my truck. Do you sell the proper o-rings for them too?

No, the original ones are not available any more but there is a company close to me that sells some that are real close to the originals. If you want I can give you the name of the company and the part number. You might be able to find some close to you.

Old57 · 05-10-2018, 11:05 PM

Quote:

Originally Posted by GMCGrim

No, the original ones are not available any more but there is a company close to me that sells some that are real close to the originals. If you want I can give you the name of the company and the part number. You might be able to find some close to you.

Ok thanks. Let me know when the hubs are ready to sell a set, and I'd like the info for the o-rings too. Thanks!

Hinz28 · 05-10-2018, 11:10 PM

Quote:

Originally Posted by GMCGrim

Ok Guys the hubs should be ready in a couple of weeks then one week for the anodizer. There will be only ten sets made right now with the possibility of more later. The person making them is slammed with other projects. I hope this is not holding up the completion of any projects.

Awesome. That should be perfect timing. What’s the key to getting one of the 10 sets??

K20super · 05-12-2018, 11:39 AM

Do you still have any available?

**GMCGrim** · 06-06-2018, 12:00 AM

Ok guys I will be picking up the anodized hubs tomorrow, then they will ready for shipment. Price is $165 shipped to you. I accept pay pal (no fees) and money orders. My pay pal is bmcgee4225@gmail.com. Thanks for your patience in waiting for these to be made.

**undertaker72** · 06-06-2018, 07:34 AM

Quote:

Originally Posted by GMCGrim

Ok guys I will be picking up the anodized hubs tomorrow, then they will ready for shipment. Price is $165 shipped to you. I accept pay pal (no fees) and money orders. My pay pal is bmcgee4225@gmail.com. Thanks for your patience in waiting for these to be made.

bruce , payment sent for 2 pair 3/4 ton dials thank you kevin

**GMCGrim** · 06-06-2018, 08:31 PM

Quote:

Originally Posted by undertaker72

bruce , payment sent for 2 pair 3/4 ton dials thank you kevin

Kevin, your hubs are on the way! They should arrive Saturday.

Old57 · 06-08-2018, 10:51 AM

GMCGrim, I just sent payment for 1 set of 3/4 ton hub dials

Old57 · 06-12-2018, 11:23 PM

I received my hub dials yesterday. I'm very pleased with the quality of them, and I got them in 2 days shipping time. Thanks GMCGrim

K20super · 06-15-2018, 10:09 AM

Do you have a set left still or are they all spoken for?

**GMCGrim** · 06-15-2018, 08:00 PM

Quote:

Originally Posted by K20super

Do you have a set left still or are they all spoken for?

I have about 14 sets of 3/4 ton and only one set of 1/2 ton which were sold right away. So there are plenty for the taking.

Benjamin · 08-08-2018, 12:54 PM

Any plans to make another batch of 1/2 ton dials?

**GMCGrim** · 08-08-2018, 06:37 PM

Quote:

Originally Posted by Benjamin

Any plans to make another batch of 1/2 ton dials?

I am working with my CNC friend to do just that. Probably won't make more than ten sets at this time. But I will contact everyone when they are done.

ETKTRYD · 09-04-2018, 03:04 PM

Looking for a set of 3/4, D44 large hub.
Thanx.

**ShortbedClayton** · 11-10-2018, 11:28 AM

PM sent on two pair of 3/4 ton blue knobs.

**GMCGrim** · 11-13-2018, 10:50 PM

Ok Gents I still have a few sets of 3/4 ton hubs left, 12 to be exact. So if anybody missed the cut the last time they were made I have them now.

K20super · 12-23-2018, 01:55 PM

Pm sent for a set of 3/4 ton knobs.

03-19-2018, 09:48 PM	#154
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Interest in aluminum hub knobs? Ford and '70 GMs __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-15-2018, 11:17 PM	#155
Hinz28 Registered User Join Date: May 2016 Location: Lincoln NE Posts: 15	Re: Interest in aluminum hub knobs? Message sent. Very interested in claiming a set in this recent batch your having made! __________________ 1970 Chevrolet C10 SWB 6.0 LSx 1971 Chevrolet K10/30 5.3 LSx 1972 K5 Blazer 8 lug LSX

04-16-2018, 06:53 AM	#156
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Interest in aluminum hub knobs? I would like to get on your list , for at least one pair , 2 if possible thank you __________________ I aint nobody DORK 1972 Cheyenne super k10 swb 350 4speed posi hooks 1934 ford 3 window blown 355 1969 Camaro hugger orange hounds tooth

05-10-2018, 08:39 PM	#157
GMCGrim Senior Member Join Date: Nov 2011 Location: Spokane Wa Posts: 207	Re: Interest in aluminum hub knobs? Ok Guys the hubs should be ready in a couple of weeks then one week for the anodizer. There will be only ten sets made right now with the possibility of more later. The person making them is slammed with other projects. I hope this is not holding up the completion of any projects.

05-12-2018, 11:39 AM	#162
K20super Registered User Join Date: Nov 2016 Location: Center ND Posts: 73	Re: Interest in aluminum hub knobs? Do you still have any available?

06-06-2018, 12:00 AM	#163
GMCGrim Senior Member Join Date: Nov 2011 Location: Spokane Wa Posts: 207	Re: Interest in aluminum hub knobs? Ok guys I will be picking up the anodized hubs tomorrow, then they will ready for shipment. Price is $165 shipped to you. I accept pay pal (no fees) and money orders. My pay pal is bmcgee4225@gmail.com. Thanks for your patience in waiting for these to be made.

06-08-2018, 10:51 AM	#166
Old57 Registered User Join Date: Apr 2015 Location: Wichita Kansas Posts: 455	Re: Interest in aluminum hub knobs? GMCGrim, I just sent payment for 1 set of 3/4 ton hub dials __________________ My 57 GMC build

06-12-2018, 11:23 PM	#167
Old57 Registered User Join Date: Apr 2015 Location: Wichita Kansas Posts: 455	Re: Interest in aluminum hub knobs? I received my hub dials yesterday. I'm very pleased with the quality of them, and I got them in 2 days shipping time. Thanks GMCGrim __________________ My 57 GMC build Last edited by Old57; 06-12-2018 at 11:24 PM. Reason: added text

06-15-2018, 10:09 AM	#168
K20super Registered User Join Date: Nov 2016 Location: Center ND Posts: 73	Re: Interest in aluminum hub knobs? Do you have a set left still or are they all spoken for?

08-08-2018, 12:54 PM	#170
Benjamin Registered User Join Date: Jul 2012 Location: New Orleans, LA Posts: 184	Re: Interest in aluminum hub knobs? Any plans to make another batch of 1/2 ton dials? __________________ 1972 K10, 350/SM465/NP205, 4 inch lift, 35x12.50s on 15x10 wheels 1976 K20 crew cab, 350/Ranger/SM465/NP205

09-04-2018, 03:04 PM	#172
ETKTRYD Registered User Join Date: Feb 2011 Location: West Lafayette IN. Posts: 55	Re: Interest in aluminum hub knobs? Looking for a set of 3/4, D44 large hub. Thanx.

11-10-2018, 11:28 AM	#173
ShortbedClayton Senior Member Join Date: Aug 2018 Location: Lancaster,PA Posts: 693	Re: Interest in aluminum hub knobs? PM sent on two pair of 3/4 ton blue knobs.

11-13-2018, 10:50 PM	#174
GMCGrim Senior Member Join Date: Nov 2011 Location: Spokane Wa Posts: 207	Re: Interest in aluminum hub knobs? Ok Gents I still have a few sets of 3/4 ton hubs left, 12 to be exact. So if anybody missed the cut the last time they were made I have them now.

12-23-2018, 01:55 PM	#175
K20super Registered User Join Date: Nov 2016 Location: Center ND Posts: 73	Re: Interest in aluminum hub knobs? Pm sent for a set of 3/4 ton knobs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.