The 60-66 "PAYING IT FORWARD" thread! - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rudyyloverboiii · 09-11-2015, 12:40 AM

Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.

rudyyloverboiii · 09-11-2015, 12:49 AM

I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)

57chevy406 · 09-11-2015, 07:40 AM

Quote:

Originally Posted by 57chevy406

Free 1961 gas tank with sending unit. Took out of my truck when I moved tank to rear under bed. No leaks sender works good has minor surface rust as it has been setting outside. Must pickup cannot ship.

Tank is gone. Went to Bill in Daytona

**slepysal** · 09-11-2015, 09:20 PM

the windshield went to Josh jteck10.

jwcardy · 09-12-2015, 11:31 PM

Quote:

Originally Posted by rudyyloverboiii

I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)

Pics of the mirrors?

Fogrocker · 09-14-2015, 02:06 PM

>>>>

I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two.

Jerry

Did you get rid of these?
If not I could use them.

Fogrocker · 09-14-2015, 02:19 PM

Quote:

Originally Posted by Crazy Rusty

Could this thread be stickied?

I have the original dash cluster for a 62 (fuel gauge, warning lights) with the cluster harness if anyone wants them.

Long shot I know... still got them?

jteck10 · 09-16-2015, 06:57 PM

Quote:

Originally Posted by slepysal

the windshield went to Josh jteck10.

thanks again sal! putting it in hopefully this week

Isaiah92260 · 09-16-2015, 08:04 PM

Quote:

Originally Posted by rudyyloverboiii

Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.

Just sent you a PM!

LostMy65 · 09-18-2015, 06:19 PM

Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.

LostMy65 · 09-18-2015, 06:34 PM

Quote:

Originally Posted by LostMy65

SM465 - Supposedly recently rebuilt.
Come get it.

Oregon City

jteck10 · 09-19-2015, 02:00 PM

Quote:

Originally Posted by LostMy65

Free
- Local - Oregon City
6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia.

shipping an option if i pay?

LostMy65 · 09-19-2015, 02:26 PM

Quote:

Originally Posted by jteck10

shipping an option if i pay?

If I can just drop them off someplace and someone else takes care of them from there, sure.

jteck10 · 09-19-2015, 03:15 PM

Quote:

Originally Posted by LostMy65

If I can just drop them off someplace and someone else takes care of them from there, sure.

ill pm you

HumphreyMurdoch · 09-20-2015, 09:02 PM

I've got a few pieces I saved off my '62 that are free to anyone who can use them.

Rear step bumper. I had to cut off one of the brackets but its a straight cut and should be pretty easy to reuse. It's really heavy.

[IMG]

[/IMG]

[IMG]

[/IMG]

I also have both lower control arms with the torsion bars still in them, H032 center section and both axle shafts still available if anyone is interested.

I can post pics of the other stuff if needed.

I'd really prefer not to ship these, but if ya really need it I'll see what I can do.

62 bigwindow · 09-20-2015, 09:17 PM

Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC

**tigerburns** · 09-21-2015, 11:00 AM

Quote:

Originally Posted by 62 bigwindow

Factory gauges from I believe 64 with warning lights
was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC

I could use it for some parts on one that I am restoring now. What would shipping to 29662 be?

matt_l · 10-13-2015, 10:59 AM

Inline 6 250 casting number 366855. Still in truck and you can hear it run.. Has some issues and runs on the hot side. I am switching over to an LS motor, and if anyone can use it, come and get it. I am in Milford MI. You can also have the three speed manual transmission. If no one wants it, I am just going to scrap it.

blown240 · 10-13-2015, 11:46 AM

Oh Man! I wish you were closer!

zplightning · 10-14-2015, 11:56 AM

I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac

Raptor0206 · 10-14-2015, 12:07 PM

Quote:

Originally Posted by zplightning

I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac

PM sent

zplightning · 10-15-2015, 01:27 PM

Quote:

Originally Posted by zplightning

I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it.

I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar.

Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/

I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut)

Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you.

-Zac

This is still available if anyone has a 63 or 64 truck to put this on (it won't fit other years)

1963c-10 · 10-16-2015, 09:18 AM

Quote:

Originally Posted by zplightning

This is still available if anyone has a 63 or 64 truck to put this on (it won't fit other years)

Im interested if its still available. PM sent

jlwilliams598 · 10-21-2015, 08:03 AM

62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.

**slepysal** · 10-27-2015, 10:33 AM

Quote:

Originally Posted by jlwilliams598

62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.

I might have one I can check for you

09-11-2015, 12:40 AM	#151
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: The 60-66 "PAYING IT FORWARD" thread! Isaiah92260 I have a wiring harness from my 64 if u want it. I'm in riverside.

09-11-2015, 12:49 AM	#152
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: The 60-66 "PAYING IT FORWARD" thread! I also have the west coast mirrors That are a little worn down and a manual steering box that might need a new bearing. (Has play)

09-11-2015, 09:20 PM	#154
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: The 60-66 "PAYING IT FORWARD" thread! the windshield went to Josh jteck10. __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

09-14-2015, 02:06 PM	#156
Fogrocker Registered User Join Date: Sep 2015 Location: Snohomish, Wa Posts: 17	Re: The 60-66 "PAYING IT FORWARD" thread! >>>> I don't have any pictures to post at this time, but while I'm thinking about it...I just did a front disc brake swap/lowering job on my 63 C10. I have all 4 factory coil springs along with the stock front spindles that are assembled with decent drum brakes. Very useable if someone has the need. Obviously too heavy to ship, but they are free if someone can use them. I'll haul them off to the scrap metal yard in a week or two. Jerry Did you get rid of these? If not I could use them.

09-18-2015, 06:19 PM	#160
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: The 60-66 "PAYING IT FORWARD" thread! Free - Local - Oregon City 6 - Dually Wheels with nice tires. 8 Lug. 16.5 Dia. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 Last edited by LostMy65; 09-18-2015 at 06:31 PM.

09-20-2015, 09:02 PM	#165
HumphreyMurdoch Registered User Join Date: May 2012 Location: Murphy, MO Posts: 172	Re: The 60-66 "PAYING IT FORWARD" thread! I've got a few pieces I saved off my '62 that are free to anyone who can use them. Rear step bumper. I had to cut off one of the brackets but its a straight cut and should be pretty easy to reuse. It's really heavy. [IMG][/IMG] [IMG][/IMG] I also have both lower control arms with the torsion bars still in them, H032 center section and both axle shafts still available if anyone is interested. I can post pics of the other stuff if needed. I'd really prefer not to ship these, but if ya really need it I'll see what I can do. __________________ '62 C10 LWB fleet side. 283 w/ a T5

09-20-2015, 09:17 PM	#166
62 bigwindow Registered User Join Date: Apr 2011 Location: Mocksville NC Posts: 824	Re: The 60-66 "PAYING IT FORWARD" thread! Factory gauges from I believe 64 with warning lights was in a load of parts I got looks to be in decent shape but noticed the speedo needle is MIA..if anybody needs one for parts or can fix the needle you are welcome to it just toss in a little for shipping.. I am in NC Attached Images

10-13-2015, 10:59 AM	#168
matt_l Registered User Join Date: Jan 2013 Location: Milford, MI Posts: 159	Re: The 60-66 "PAYING IT FORWARD" thread! Inline 6 250 casting number 366855. Still in truck and you can hear it run.. Has some issues and runs on the hot side. I am switching over to an LS motor, and if anyone can use it, come and get it. I am in Milford MI. You can also have the three speed manual transmission. If no one wants it, I am just going to scrap it. Attached Images __________________ Matt Father Son 66 Build: http://67-72chevytrucks.com/vboard/s...d.php?t=564694

10-13-2015, 11:46 AM	#169
blown240 Registered User Join Date: Jan 2011 Location: CA Posts: 772	Re: The 60-66 "PAYING IT FORWARD" thread! Oh Man! I wish you were closer! __________________ '61 Panel - Helms Bakery Truck - Daily Driver - FOR SALE

10-14-2015, 11:56 AM	#170
zplightning Registered User Join Date: Jul 2014 Location: San Diego, CA Posts: 77	Re: The 60-66 "PAYING IT FORWARD" thread! I have a Classic Performance Trac Bar 6364DATB, which is supposedly made for 63-64 trucks. Brand new, with attempted installation marks on it. I bought it from Summit, and I can't get it to fit for the life of me, I am sure it user error but I could use some good karma and I'm just going to put new bushings in my stock bar. Here is the exact one: http://www.summitracing.com/parts/cl...datb/overview/ I think it's missing a lock nut on it from trying to get it on, but I think it can be used as is or replaced (you can still lock the bar from spinning with one nut) Please don't ask for this to resell, if you've got a lowered 63-64 and can pay shipping, I will send it to you. -Zac

10-21-2015, 08:03 AM	#174
jlwilliams598 Registered User Join Date: Oct 2012 Location: Jackson, TN Posts: 11	Re: The 60-66 "PAYING IT FORWARD" thread! 62 bigwindow, did anyone get the gauges from you? I am in Charleston and could use them if you still have them.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.