Pops 72 cheyenne dropmember build - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 02-11-2011, 10:53 PM

Sorry to hear about the engine. But the replacement sounds even better.

How are you planning to shave the firewall? Symettrical? Shave the rain gutter? Cap it 90 or at 45 degrees?

And keep us up to speed if something happens with the burb (to be tahoe)

**superflysteiny** · 02-12-2011, 10:48 PM

Quote:

Originally Posted by VA72C10

Sorry to hear about the engine. But the replacement sounds even better.

How are you planning to shave the firewall? Symettrical? Shave the rain gutter? Cap it 90 or at 45 degrees?

And keep us up to speed if something happens with the burb (to be tahoe)

Porterbuilt sheet metal and 90 degrees on the rain gutter. Let you mow on the burb
Posted via Mobile Device

mcbassin · 02-13-2011, 02:07 PM

I have a couple of multi part questions,
1. Does your custom billet side markers utilize a factory reflector/light housing? is it made for L.E.D.? I'm interested in making some similar.

2. Where did you get your upper mouldings? How was the fitment/quality? Did you buy your lower mouldings from them too? Woodgrain or black?

**superflysteiny** · 02-13-2011, 10:00 PM

Quote:

Originally Posted by mcbassin

I have a couple of multi part questions,
1. Does your custom billet side markers utilize a factory reflector/light housing? is it made for L.E.D.? I'm interested in making some similar.

2. Where did you get your upper mouldings? How was the fitment/quality? Did you buy your lower mouldings from them too? Woodgrain or black?

I bought the moldings from chevyland in rancho cordova ca. Fit was perfect I also bought the lower moldings from the same place and they are black. The markers are made for LEDs and do not use stock lenses. The are two piece billet out side with the lens glued to the billet. Hope this helps
Posted via Mobile Device

mcbassin · 02-13-2011, 11:14 PM

Quote:

Originally Posted by superflysteiny

I bought the moldings from chevyland in rancho cordova ca. Fit was perfect I also bought the lower moldings from the same place and they are black. The markers are made for LEDs and do not use stock lenses. The are two piece billet out side with the lens glued to the billet. Hope this helps
Posted via Mobile Device

Thanks, I sure would like to see some pictures of both sides if you have those markers off again. Don't go to any trouble though. How much was your moulding package if you don't mind, did you use oem style hangers/clips? I have heard some stories about really crappy aftermarket trim. thanks

**superflysteiny** · 02-14-2011, 07:43 PM

I will send you pica when I get back into town as the markers are off right now. The molding kit uses all stock clips and was 875 for the upper and lower with the tail gate. Hope this helps.
Posted via Mobile Device

RCbowtie69 · 02-15-2011, 08:51 PM

Cool build & looking good

**superflysteiny** · 02-16-2011, 02:15 PM

Quote:

Originally Posted by RCbowtie69

Cool build & looking good

Thanks man I am trying to make it as close to restored as I Dan. Should be a clean everyday driver
Posted via Mobile Device

**67cheby** · 02-17-2011, 12:59 PM

been waiting on an update...come on we need some pics !!! LOL just harrassing you

**67cheby** · 02-17-2011, 01:09 PM

been waiting on an update...come on we need some pics !!! LOL just harrassing you

CheyenneShop · 02-18-2011, 12:06 AM

Slacker

68 Quad C10 · 02-18-2011, 11:02 AM

FRENCHBLUE72 · 02-18-2011, 08:38 PM

Im in all your builds are super sick..

**superflysteiny** · 02-19-2011, 02:22 AM

Got home today and picked the frame up. I am a little tired from my trip so did not get alot done but here are some pictures.

**SactoJim** · 02-19-2011, 02:56 AM

Another awesome build, and in my back yard......hope I see it around town.

...on another note, do you still have the front crossmember with suspension and if so, wanna get rid of it. I'm close and would be glad to come get it.......and also get a peek at your projects. Looking for 5 lug for my 68.....thx.

**superflysteiny** · 02-19-2011, 10:44 AM

Quote:

Originally Posted by SactoJim

Another awesome build, and in my back yard......hope I see it around town.

...on another note, do you still have the front crossmember with suspension and if so, wanna get rid of it. I'm close and would be glad to come get it.......and also get a peek at your projects. Looking for 5 lug for my 68.....thx.

You will we will have to get together. I want to see your truck . I looked over your build it is very nice.
Posted via Mobile Device

**superflysteiny** · 02-19-2011, 10:47 AM

If I were not waiting for axles and the motor I could have the truck back together in two weeks. The issue is I am fixing all the screw ups the other guy made which happens and also I will have a few weeks in the engine compartment with the inner fenders. I plan to take it to cool April night in redding this yr. Should be fun. That is if it's not raining.

Posted via Mobile Device

**67cheby** · 02-19-2011, 10:49 AM

what is your idea on the inner fenders ??

**superflysteiny** · 02-20-2011, 10:53 PM

Quote:

Originally Posted by 67cheby

what is your idea on the inner fenders ??

Not sure yet but it will be smooth
Posted via Mobile Device

hgs_notes · 02-19-2011, 09:44 AM

I like the satin finish for the frame, rather than gloss. You should be driving it in a couple weeks right?

**67cheby** · 02-19-2011, 10:26 AM

NICE....cant wait for mondays pics

1stchevy · 02-19-2011, 11:24 AM

Frame looks nice!

jwalk · 02-19-2011, 12:02 PM

Frame looks GOOD! It looks like you coated it with the rear notch, front member, and trailing arm crossmember installed. That's how I want to do mine. I've just noticed that a lot of people get everything coated apart. Did everything get covered nice around all that stuff?
Posted via Mobile Device

**superflysteiny** · 02-20-2011, 10:54 PM

Quote:

Originally Posted by jwalk

Frame looks GOOD! It looks like you coated it with the rear notch, front member, and trailing arm crossmember installed. That's how I want to do mine. I've just noticed that a lot of people get everything coated apart. Did everything get covered nice around all that stuff?
Posted via Mobile Device

I coated it with notches and front cross member in came out perfect
Posted via Mobile Device

**superflysteiny** · 02-21-2011, 01:02 PM

Well it was Shawnas birthday this weekend so I did not get much done on the truck. Here is what I got done in 3 hrs yesterday.

+

02-11-2011, 10:53 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Pops 72 cheyenne dropmember build Sorry to hear about the engine. But the replacement sounds even better. How are you planning to shave the firewall? Symettrical? Shave the rain gutter? Cap it 90 or at 45 degrees? And keep us up to speed if something happens with the burb (to be tahoe) __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-13-2011, 02:07 PM	#3
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Pops 72 cheyenne dropmember build I have a couple of multi part questions, 1. Does your custom billet side markers utilize a factory reflector/light housing? is it made for L.E.D.? I'm interested in making some similar. 2. Where did you get your upper mouldings? How was the fitment/quality? Did you buy your lower mouldings from them too? Woodgrain or black? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 02-13-2011 at 02:07 PM.

02-14-2011, 07:43 PM	#6
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build I will send you pica when I get back into town as the markers are off right now. The molding kit uses all stock clips and was 875 for the upper and lower with the tail gate. Hope this helps. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell Last edited by superflysteiny; 02-14-2011 at 07:43 PM.

02-15-2011, 08:51 PM	#7
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Pops 72 cheyenne dropmember build Cool build & looking good

02-17-2011, 12:59 PM	#9
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build been waiting on an update...come on we need some pics !!! LOL just harrassing you __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-17-2011, 01:09 PM	#10
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build been waiting on an update...come on we need some pics !!! LOL just harrassing you __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-18-2011, 12:06 AM	#11
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: Pops 72 cheyenne dropmember build Slacker __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

02-18-2011, 11:02 AM	#12
68 Quad C10 Registered User Join Date: Jul 2009 Location: Idaho Falls Posts: 324	Re: Pops 72 cheyenne dropmember build __________________ http://www.tandscustomcars.com/ My Quad Cab build:http://67-72chevytrucks.com/vboard/s...d.php?t=352342 IT"S GOT A ROOF NOW WHOO HOO!!!! 65 GTO Build (If you wanna check it out) http://67-72chevytrucks.com/vboard/s...40#post4503040 Last edited by 68 Quad C10; 02-18-2011 at 11:03 AM.

02-18-2011, 08:38 PM	#13
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Pops 72 cheyenne dropmember build Im in all your builds are super sick.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-19-2011, 02:22 AM	#14
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Got home today and picked the frame up. I am a little tired from my trip so did not get alot done but here are some pictures. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-19-2011, 02:56 AM	#15
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Pops 72 cheyenne dropmember build Another awesome build, and in my back yard......hope I see it around town. ...on another note, do you still have the front crossmember with suspension and if so, wanna get rid of it. I'm close and would be glad to come get it.......and also get a peek at your projects. Looking for 5 lug for my 68.....thx. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

02-19-2011, 10:47 AM	#17
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build If I were not waiting for axles and the motor I could have the truck back together in two weeks. The issue is I am fixing all the screw ups the other guy made which happens and also I will have a few weeks in the engine compartment with the inner fenders. I plan to take it to cool April night in redding this yr. Should be fun. That is if it's not raining. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-19-2011, 10:49 AM	#18
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build what is your idea on the inner fenders ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-19-2011, 09:44 AM	#20
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: Pops 72 cheyenne dropmember build I like the satin finish for the frame, rather than gloss. You should be driving it in a couple weeks right? __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-19-2011, 10:26 AM	#21
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build NICE....cant wait for mondays pics __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172



Register or Log In To remove these advertisements.

02-19-2011, 11:24 AM	#22
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Pops 72 cheyenne dropmember build Frame looks nice!

02-19-2011, 12:02 PM	#23
jwalk What was I thinking? Join Date: Mar 2007 Location: oklahoma Posts: 1,137	Re: Pops 72 cheyenne dropmember build Frame looks GOOD! It looks like you coated it with the rear notch, front member, and trailing arm crossmember installed. That's how I want to do mine. I've just noticed that a lot of people get everything coated apart. Did everything get covered nice around all that stuff? Posted via Mobile Device __________________ Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949

02-21-2011, 01:02 PM	#25
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Well it was Shawnas birthday this weekend so I did not get much done on the truck. Here is what I got done in 3 hrs yesterday.+ __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

Register or Log In To remove these advertisements.