72 K20 Cheyenne Super Build - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**DeadheadNM** · 03-23-2013, 08:16 PM

Thanks guys!

Did this truck come with one of those charcoal canisters mounted under the hood to vent the gas tank? If so, anyone have some detailed pics to help me out?

Andrew S · 03-25-2013, 09:35 PM

'72 3/4 ton and up should not have had a charcoal canister, at least for Federal emissions, California emissions I am not certain.

**DeadheadNM** · 03-26-2013, 08:32 PM

Quote:

Originally Posted by Andrew S

'72 3/4 ton and up should not have had a charcoal canister, at least for Federal emissions, California emissions I am not certain.

That's helpful and may explain why there wasn't one under the hood. Thanks. Pete

mjensen · 03-27-2013, 11:29 PM

Wow, I'm not sure how you hid this build from me

. I'm really digging it. It almost makes me want to two tone mine, but I don't think it would look as good as the orange/white combo.

**HeloCrewChief** · 04-09-2013, 11:45 PM

Any pictures with the wheels/tires on? I need motivation

**DeadheadNM** · 04-09-2013, 11:54 PM

Quote:

Originally Posted by HeloCrewChief

Any pictures with the wheels/tires on? I need motivation

Man I'd love to have those on right now and Eric the shop manager knows that. He has a good point for holding off though as they could be stepped on to reach areas in the bed etc. and get scuffed up. So for now we are holding off. Stay tuned!

**DeadheadNM** · 04-10-2013, 12:00 AM

I did scare up this NOS period correct 23 channel CB for $20 shipped!

HotRod C/10 · 04-10-2013, 12:57 AM

Breaker Breaker we got us a CONVOY!

**DeadheadNM** · 04-10-2013, 01:14 AM

Quote:

Originally Posted by hotrod c/10

breaker breaker we got us a convoy!

lol!

**DeadheadNM** · 04-11-2013, 02:46 PM

Scared up a NOS engine timing tab to swap out with the now orange OEM piece - thanks for the feedback. Went with a standard HEI distributor rather than a small body type: wanted to avoid use of a coil.

Trim going on. A combo of Mar-K upper and NOS wood grain lower. I went with all metal clips for the trim attachment rather than a combo of metal and adhesive. GM NOS vent shades and door handles are in place.

**DeadheadNM** · 04-11-2013, 02:50 PM

NOS cab divider trim....those guys are doing a kick a%% job

Zoomin · 04-11-2013, 02:58 PM

Man oh man, does that look good! I love this part of the build when you finally get rewards for all the hours of labor.

**DeadheadNM** · 04-11-2013, 02:59 PM

Need help with this install fellas. This is an OEM Blazer skid plate. The cross member is supposedly correct for the skid plate but you can see there's a crazy gap between the plate and its cross member. Is that a correct cross member or were spacers used in the installation of the plates on a Blazer? I suspect I was sold an incorrect cross member - hope the frame holes align with a correct member.

First pic is mine second a borrowed pic of an installed plate.

1985-GMC · 04-11-2013, 07:27 PM

Can you swap the two members, it looks like your front one is longer.
Posted via Mobile Device

**DeadheadNM** · 04-11-2013, 07:35 PM

Quote:

Originally Posted by 1985-GMC

Can you swap the two members, it looks like your front one is longer.
Posted via Mobile Device

I think what I'll have to do is scare up an auto tranny crossmember and use that. I'm told that a skid plate xmember is the same as the auto tranny xmember minus the riveted brackets.

ryanroo · 04-11-2013, 08:25 PM

Head north Pete! i have one in the garage.

Ryan

**DeadheadNM** · 04-11-2013, 08:32 PM

Quote:

Originally Posted by ryanroo

Head north Pete! i have one in the garage.

Ryan

Tempting!!!

ryanroo · 04-11-2013, 08:58 PM

let me know if you want it, ill try to box it up

Ryan

67chevy1series · 04-12-2013, 04:36 PM

it seems that you aready have a auto tranny x member with out the riveted brackets.... i would put some nice spacers in there and be done.

**DeadheadNM** · 04-12-2013, 09:35 PM

Quote:

Originally Posted by 67chevy1series

it seems that you aready have a auto tranny x member with out the riveted brackets.... i would put some nice spacers in there and be done.

Not a bad thought....we tried that actually but it looked too funky for my taste...kinda like a 6" blocks under leaf spring lift look

**DeadheadNM** · 04-12-2013, 09:36 PM

Quote:

Originally Posted by Zoomin

Man oh man, does that look good! I love this part of the build when you finally get rewards for all the hours of labor.

Missed the post earlier....thanks bud! Appreciate you keeping up with the build. Pete

owner 84 · 05-04-2013, 01:13 PM

Very clean prject and awesome. Subscribed!
Posted via Mobile Device

owner 84 · 05-04-2013, 01:23 PM

By the way, I m looking for this rubber between the finder and the door for my chevy 1984.
Where did you get it?

[IMG]

[/IMG]
Posted via Mobile Device

**DeadheadNM** · 05-04-2013, 01:44 PM

Quote:

Originally Posted by owner 84

Very clean prject and awesome. Subscribed!
Posted via Mobile Device

Thanks and welcome! Not much new progress but I posted a few recent pics below. Can't wait to see the steelies bolted on! I have a correct cruise control on the way.

Quote:

Originally Posted by owner 84

By the way, I m looking for this rubber between the finder and the door for my chevy 1984.
Where did you get it?

Those came from Wes Hepp at Classic Heartbeat: a board vender here on the forum. His website is: http://www.classicheartbeat.com/ If Wes doesn't have your year google GMC Paul.

y5mgisi · 05-04-2013, 08:35 PM

This is about the fastest resto i have ever seen!

03-23-2013, 08:16 PM	#151
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: 72 K20 Cheyenne Super Build Thanks guys! Did this truck come with one of those charcoal canisters mounted under the hood to vent the gas tank? If so, anyone have some detailed pics to help me out? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-25-2013, 09:35 PM	#152
Andrew S Registered User Join Date: Apr 2012 Location: North Central Washington Posts: 64	Re: 72 K20 Cheyenne Super Build '72 3/4 ton and up should not have had a charcoal canister, at least for Federal emissions, California emissions I am not certain.

03-27-2013, 11:29 PM	#154
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: 72 K20 Cheyenne Super Build Wow, I'm not sure how you hid this build from me . I'm really digging it. It almost makes me want to two tone mine, but I don't think it would look as good as the orange/white combo. __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

04-09-2013, 11:45 PM	#155
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,057	Re: 72 K20 Cheyenne Super Build Any pictures with the wheels/tires on? I need motivation __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

04-10-2013, 12:00 AM	#157
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: 72 K20 Cheyenne Super Build I did scare up this NOS period correct 23 channel CB for $20 shipped! Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-10-2013, 12:57 AM	#158
HotRod C/10 Registered User Join Date: Feb 2012 Location: Albuquerque NM Posts: 3,053	Re: 72 K20 Cheyenne Super Build Breaker Breaker we got us a CONVOY! __________________ SOLD -77 CHEYENNE SWB, LS SWAPPED -1976 SILVERADO YUBA GOLD/NEUTRAL (2-TONE)

04-11-2013, 02:46 PM	#160
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: 72 K20 Cheyenne Super Build Scared up a NOS engine timing tab to swap out with the now orange OEM piece - thanks for the feedback. Went with a standard HEI distributor rather than a small body type: wanted to avoid use of a coil. Trim going on. A combo of Mar-K upper and NOS wood grain lower. I went with all metal clips for the trim attachment rather than a combo of metal and adhesive. GM NOS vent shades and door handles are in place. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-11-2013, 02:50 PM	#161
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: 72 K20 Cheyenne Super Build NOS cab divider trim....those guys are doing a kick a%% job Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-11-2013, 02:58 PM	#162
Zoomin Man of Mini-Talents Join Date: Sep 2009 Location: Oklahoma City, OK Posts: 4,295	Re: 72 K20 Cheyenne Super Build Man oh man, does that look good! I love this part of the build when you finally get rewards for all the hours of labor. __________________ Steve Project - Ruth 66 Skylark Project - Lola 60 Biscayne Project - Iron Ox 54 GMC 100 Project - Darth 69 Camaro

04-11-2013, 02:59 PM	#163
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,424	Re: 72 K20 Cheyenne Super Build Need help with this install fellas. This is an OEM Blazer skid plate. The cross member is supposedly correct for the skid plate but you can see there's a crazy gap between the plate and its cross member. Is that a correct cross member or were spacers used in the installation of the plates on a Blazer? I suspect I was sold an incorrect cross member - hope the frame holes align with a correct member. First pic is mine second a borrowed pic of an installed plate. Attached Images __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

04-11-2013, 07:27 PM	#164
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: 72 K20 Cheyenne Super Build Can you swap the two members, it looks like your front one is longer. Posted via Mobile Device __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

04-11-2013, 08:25 PM	#166
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 72 K20 Cheyenne Super Build Head north Pete! i have one in the garage. Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

04-11-2013, 08:58 PM	#168
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: 72 K20 Cheyenne Super Build let me know if you want it, ill try to box it up Ryan __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

04-12-2013, 04:36 PM	#169
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 72 K20 Cheyenne Super Build it seems that you aready have a auto tranny x member with out the riveted brackets.... i would put some nice spacers in there and be done.

05-04-2013, 01:13 PM	#172
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: 72 K20 Cheyenne Super Build Very clean prject and awesome. Subscribed! Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/



Register or Log In To remove these advertisements.

05-04-2013, 01:23 PM	#173
owner 84 Registered User Join Date: Jul 2011 Location: NY Posts: 263	Re: 72 K20 Cheyenne Super Build By the way, I m looking for this rubber between the finder and the door for my chevy 1984. Where did you get it? [IMG][/IMG] Posted via Mobile Device __________________ email me @ nasser_060@hotmail.com and Check out my flicker @ http://www.flickr.com/photos/0060/

05-04-2013, 08:35 PM	#175
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: 72 K20 Cheyenne Super Build This is about the fastest resto i have ever seen! __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

Register or Log In To remove these advertisements.