MO Parting out well optioned 70 GMC 1/2 ton. - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truckeroy · 10-25-2013, 08:35 PM

Do you still have the power steering gear box? Price? I have seen these shipped in a $17 priortiy box (you mentioned you didn't like to deal with large parts) Would be interested in the ps pump, brackets and hoses also. Price + shipping? 62565 IL. Thanks Roy

**specialtyretail** · 10-25-2013, 10:03 PM

Quote:

Originally Posted by truckeroy

Do you still have the power steering gear box? Price? I have seen these shipped in a $17 priortiy box (you mentioned you didn't like to deal with large parts) Would be interested in the ps pump, brackets and hoses also. Price + shipping? 62565 IL. Thanks Roy

Hey Roy. Shipping the gearbox is not a problem. We just don't do body panels and stuff like that. The pump & brackets are sold, sorry. I would ship the gearbox to you for $85.00 shipped. Thanks, Fred.

kda2000 · 10-26-2013, 01:01 AM

Fred,

I'm interested in the complete power steering setup (to swap into non-pwr) if you still have it available. Pump, brackets, gear, pitman, ... Small block - short water pump

Also looking for a carrier bearing mounting bracket -- like the one in the first picture in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584787

And finally also looking for 1 (or a set) of swaybar mounting brackets, that are riveted to the frame.

Let me know if you have them - Thanks
Ken

**Gary 70 Jimmy** · 10-26-2013, 03:18 AM

Did the grill sell yet if not how nice is it and can I get some pictures

**specialtyretail** · 10-26-2013, 05:49 AM

Quote:

Originally Posted by Gary 70 Jimmy

Did the grill sell yet if not how nice is it and can I get some pictures

Hey Gary. The grille is rough and all the chrome has rusted off along the bottom. Thanks, Fred.

**Gary 70 Jimmy** · 10-26-2013, 10:29 AM

Quote:

Originally Posted by specialtyretail

Hey Gary. The grille is rough and all the chrome has rusted off along the bottom. Thanks, Fred.

Ok thanks sounds like it is worse then mine.

**specialtyretail** · 10-26-2013, 11:08 AM

Quote:

Originally Posted by Gary 70 Jimmy

Ok thanks sounds like it is worse then mine.

It is pretty nasty. We call it gulley fill where I am from. Thanks, Fred.

**specialtyretail** · 10-26-2013, 05:53 AM

Quote:

Originally Posted by kda2000

Fred,

I'm interested in the complete power steering setup (to swap into non-pwr) if you still have it available. Pump, brackets, gear, pitman, ... Small block - short water pump

Also looking for a carrier bearing mounting bracket -- like the one in the first picture in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584787

And finally also looking for 1 (or a set) of swaybar mounting brackets, that are riveted to the frame.

Let me know if you have them - Thanks
Ken

Hey Ken. The p/s pump and brackets have sold. I do have a gearbox & pitman arm still available for $85.00 shipped. Thanks, Fred.

**specialtyretail** · 10-26-2013, 05:02 PM

Frame and cab still for sale.... OK guys. Barring any unforseen events, I am going to be done with this rig Sunday evening. According to the SPID it is a positaction rear axle. I do not want to remove it but will sell the whole chassis, nasty ass bed and rusty cab for $150.00 , you just bring some wheels & tires or we can load it and then remove mine. Any takers??? Thanks, Fred.

rich67 · 10-26-2013, 05:19 PM

Ah hell ill take it for that fred. Final answer regis! Lol

**specialtyretail** · 10-26-2013, 05:31 PM

Quote:

Originally Posted by rich67

Ah hell ill take it for that fred. Final answer regis! Lol

Cool. Consider it yours. I knew I would get you. Thanks, Fred.

venomviper5 · 10-27-2013, 09:04 AM

Hello, the defrost duct that you are showing isn't the ones that I was speaking of. I was meaning the actual duct that is in the dash.

**specialtyretail** · 10-27-2013, 09:34 AM

Quote:

Originally Posted by venomviper5

Hello, the defrost duct that you are showing isn't the ones that I was speaking of. I was meaning the actual duct that is in the dash.

Sorry, I don't guess I know which part you are talking about. It is an air conditioned truck and does have a good control panel with all levers intact. If that is what you need I will get you some pics & a price. Thanks, Fred.

rich67 · 10-26-2013, 05:37 PM

Ill be in touch fred.

**specialtyretail** · 10-26-2013, 06:50 PM

Quote:

Originally Posted by rich67

Ill be in touch fred.

Cool....

venomviper5 · 10-26-2013, 11:56 PM

I will take them for that price. Thanks. Let me know how to pay you. Also, I forgot. I also need the heater controls as well. Does it have it? How much?

**specialtyretail** · 10-27-2013, 09:38 AM

Quote:

Originally Posted by venomviper5

I will take them for that price. Thanks. Let me know how to pay you. Also, I forgot. I also need the heater controls as well. Does it have it? How much?

We do paypal, it is sharley@cablerocket.com. If you want to mail payment it is 169 Cypress Drive, Jackson, Mo 63755. Thanks, Fred.

**specialtyretail** · 10-27-2013, 05:01 PM

OK Rich, here is what you are getting.... Thanks, Fred.

JimH2828 · 10-27-2013, 07:49 PM

Quote:

Hey Jim. The keys are aftermarket, I did get time to check on that. My granddaughter came up for the weekend and I have just been able to get on here in short little spurts. She kind of like our time together and I am going to get all I can of it before she outgrows me. The vent windows are in sad shape, I have not checked on the kick panels, they are probably pretty rough as well. Shipping is going to be the deal breaker probably on everything you want. Off the top of my head. Steering column complete from nut to rag joint and the whole power brake set up,,,,$200.00 shipped for all of it.

Thanks, Fred.

Fred, now worries about taking your time, spending time with the granddaughter takes priority for sure. What's the best you can do on the complete steering column and whole power brake setup shipped to 30005 GA. I was hoping for around $150 shipped. Please post pics when you get a chance.

Thanks
Jim

**specialtyretail** · 10-27-2013, 08:49 PM

Quote:

Originally Posted by JimH2828

Fred, now worries about taking your time, spending time with the granddaughter takes priority for sure. What's the best you can do on the complete steering column and whole power brake setup shipped to 30005 GA. I was hoping for around $150 shipped. Please post pics when you get a chance.

Thanks
Jim

Hey Jim. I do have the column and intermediate shaft. Also have the booster, brackets, rods, master cylinder, prop valve and short steel lines. I can get you some pics Monday evening. I just can't get to your $150.00 price shipped though. I will work with you and go $175.00 shipped for all of it. Thanks, Fred.

**specialtyretail** · 10-30-2013, 07:35 PM

Power steering pump, hoses and brackets have sold. Still have the gearbox and just a lot of odds and ends. Thanks, Fred.

**specialtyretail** · 10-30-2013, 08:16 PM

Fenders sold to Up Grade. Thanks, Fred.

BlackhillsHD · 10-31-2013, 09:48 AM

Fresh air door under cowl?

**specialtyretail** · 10-31-2013, 11:53 AM

Quote:

Originally Posted by BlackhillsHD

Fresh air door under cowl?

I did not notice. I will try to look after work today. Thanks, Fred.

knomadd · 10-31-2013, 03:35 PM

I may be a little late since you've got it all taken out, but do you happen to have the steering column clamp on the engine compartment side? I've got the bracket that attaches to the fire wall, but the column is currently clamped with a hose clamp. I'd like to get it back to original style.

If you've got one, in good shape, let me know a price, shipped to 77471.

10-25-2013, 08:35 PM	#1
truckeroy Registered User Join Date: Oct 2013 Location: Shelbyville, IL Posts: 111	Re: Parting out well optioned 70 GMC 1/2 ton. Do you still have the power steering gear box? Price? I have seen these shipped in a $17 priortiy box (you mentioned you didn't like to deal with large parts) Would be interested in the ps pump, brackets and hoses also. Price + shipping? 62565 IL. Thanks Roy

10-26-2013, 01:01 AM	#3
kda2000 Registered User Join Date: Oct 2013 Location: Austin, TX Posts: 170	Re: Parting out well optioned 70 GMC 1/2 ton. Fred, I'm interested in the complete power steering setup (to swap into non-pwr) if you still have it available. Pump, brackets, gear, pitman, ... Small block - short water pump Also looking for a carrier bearing mounting bracket -- like the one in the first picture in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=584787 And finally also looking for 1 (or a set) of swaybar mounting brackets, that are riveted to the frame. Let me know if you have them - Thanks Ken

10-26-2013, 03:18 AM	#4
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,402	Re: Parting out well optioned 70 GMC 1/2 ton. Did the grill sell yet if not how nice is it and can I get some pictures __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

10-26-2013, 05:02 PM	#9
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out well optioned 70 GMC 1/2 ton. Frame and cab still for sale.... OK guys. Barring any unforseen events, I am going to be done with this rig Sunday evening. According to the SPID it is a positaction rear axle. I do not want to remove it but will sell the whole chassis, nasty ass bed and rusty cab for $150.00 , you just bring some wheels & tires or we can load it and then remove mine. Any takers??? Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 11-08-2013 at 08:04 PM.

10-26-2013, 05:19 PM	#10
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Parting out well optioned 70 GMC 1/2 ton. Ah hell ill take it for that fred. Final answer regis! Lol

10-27-2013, 09:04 AM	#12
venomviper5 Registered User Join Date: Oct 2013 Location: Coal Grove Posts: 3	Re: Parting out well optioned 70 GMC 1/2 ton. Hello, the defrost duct that you are showing isn't the ones that I was speaking of. I was meaning the actual duct that is in the dash.

10-26-2013, 05:37 PM	#14
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Parting out well optioned 70 GMC 1/2 ton. Ill be in touch fred.

10-26-2013, 11:56 PM	#16
venomviper5 Registered User Join Date: Oct 2013 Location: Coal Grove Posts: 3	Re: Parting out well optioned 70 GMC 1/2 ton. I will take them for that price. Thanks. Let me know how to pay you. Also, I forgot. I also need the heater controls as well. Does it have it? How much?

10-27-2013, 05:01 PM	#18
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out well optioned 70 GMC 1/2 ton. OK Rich, here is what you are getting.... Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

10-30-2013, 07:35 PM	#21
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out well optioned 70 GMC 1/2 ton. Power steering pump, hoses and brackets have sold. Still have the gearbox and just a lot of odds and ends. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

10-30-2013, 08:16 PM	#22
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out well optioned 70 GMC 1/2 ton. Fenders sold to Up Grade. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

10-31-2013, 09:48 AM	#23
BlackhillsHD Registered User Join Date: Nov 2011 Location: Rapid City SD Posts: 140	Re: Parting out well optioned 70 GMC 1/2 ton. Fresh air door under cowl? __________________ 1970 : Chevy: K20 "Frank the Tank" 6.0 LS, 4L80E, 14 bolt, and Dana 44 1970 K5 Blazer CST 350, TH350, Np205, Dana 60 and 14 bolt General Motors Master Certified wrench swinger ASE certified Master auto tech Instructor of Automotive Technology

10-31-2013, 03:35 PM	#25
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: Parting out well optioned 70 GMC 1/2 ton. I may be a little late since you've got it all taken out, but do you happen to have the steering column clamp on the engine compartment side? I've got the bracket that attaches to the fire wall, but the column is currently clamped with a hose clamp. I'd like to get it back to original style. If you've got one, in good shape, let me know a price, shipped to 77471. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.