Pops 72 cheyenne dropmember build - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jbclassix · 02-12-2011, 12:16 AM

Quote:

Originally Posted by superflysteiny

Also I tore the motor apart and it is not what the guy said it is so I am putting a 500 hp 400 small block chevy in it with forged crank pistons and rods. Glad you guys are liking the build.

Posted via Mobile Device

I have a pile of engines I call my Disappointment Heap. Wanna throw yours on there too?

mcbassin · 02-12-2011, 12:19 AM

Glad I found this thread! You are one hard working mother trucker dude. It's amazing how fast you went from driving a complete truck to scraping the pavement on a full PB setup....amazing

bharrison1 · 02-12-2011, 12:01 PM

Quote:

Originally Posted by superflysteiny

Thanks guys more pics to come. Got quote for powder coat today. Complete chassis and everything hanging off chassis with rear end 650. Super cheep. These guys do all my work. Some of the best
Posted via Mobile Device

Thats a smokin deal on the powdercoating around here its 300 just to do a set of wheels!!Truck is goona be cool!!!!!!!Love it!!!!

**superflysteiny** · 02-12-2011, 10:48 PM

Quote:

Originally Posted by VA72C10

Sorry to hear about the engine. But the replacement sounds even better.

How are you planning to shave the firewall? Symettrical? Shave the rain gutter? Cap it 90 or at 45 degrees?

And keep us up to speed if something happens with the burb (to be tahoe)

Porterbuilt sheet metal and 90 degrees on the rain gutter. Let you mow on the burb
Posted via Mobile Device

**superflysteiny** · 02-12-2011, 10:49 PM

Quote:

Originally Posted by jbclassix

I have a pile of engines I call my Disappointment Heap. Wanna throw yours on there too?

For sure never no what you are getting when you buy these old trucks
Posted via Mobile Device

**superflysteiny** · 02-12-2011, 10:51 PM

Quote:

Originally Posted by mcbassin

Glad I found this thread! You are one hard working mother trucker dude. It's amazing how fast you went from driving a complete truck to scraping the pavement on a full PB setup....amazing

Thanks man. I can't seem to leave anything alone. If it's not scraping the ground with big wheels I don't want to drive it.
Posted via Mobile Device

**superflysteiny** · 02-12-2011, 10:55 PM

Quote:

Originally Posted by youngrodder

What wizard product do you use? Is it the "Power Seal" prudct? I went on their web site but was not sure what product you were intending on using.

How about for polishing dull billet? What would you recommend? I have some billet engine accessory brackets and pulleys that need a good polishing.

I polish dull billet with mothers power ball and mothers billet polish works well for me.
Posted via Mobile Device

**youngrodder** · 02-12-2011, 11:23 PM

Quote:

Originally Posted by superflysteiny

I polish dull billet with mothers power ball and mothers billet polish works well for me.
Posted via Mobile Device

Thanks, that was actually what I was going to try prior to reading your thread....

Marc

**superflysteiny** · 02-13-2011, 03:12 AM

It works really good. May have to do it a few times but it works great
Posted via Mobile Device

nastyc10 · 02-13-2011, 01:30 PM

Dude thats gonna be a sweet cruiser! Nice choice of wheels.

mcbassin · 02-13-2011, 02:07 PM

I have a couple of multi part questions,
1. Does your custom billet side markers utilize a factory reflector/light housing? is it made for L.E.D.? I'm interested in making some similar.

2. Where did you get your upper mouldings? How was the fitment/quality? Did you buy your lower mouldings from them too? Woodgrain or black?

**superflysteiny** · 02-13-2011, 10:00 PM

Quote:

Originally Posted by mcbassin

I have a couple of multi part questions,
1. Does your custom billet side markers utilize a factory reflector/light housing? is it made for L.E.D.? I'm interested in making some similar.

2. Where did you get your upper mouldings? How was the fitment/quality? Did you buy your lower mouldings from them too? Woodgrain or black?

I bought the moldings from chevyland in rancho cordova ca. Fit was perfect I also bought the lower moldings from the same place and they are black. The markers are made for LEDs and do not use stock lenses. The are two piece billet out side with the lens glued to the billet. Hope this helps
Posted via Mobile Device

mcbassin · 02-13-2011, 11:14 PM

Quote:

Originally Posted by superflysteiny

I bought the moldings from chevyland in rancho cordova ca. Fit was perfect I also bought the lower moldings from the same place and they are black. The markers are made for LEDs and do not use stock lenses. The are two piece billet out side with the lens glued to the billet. Hope this helps
Posted via Mobile Device

Thanks, I sure would like to see some pictures of both sides if you have those markers off again. Don't go to any trouble though. How much was your moulding package if you don't mind, did you use oem style hangers/clips? I have heard some stories about really crappy aftermarket trim. thanks

**superflysteiny** · 02-14-2011, 07:43 PM

I will send you pica when I get back into town as the markers are off right now. The molding kit uses all stock clips and was 875 for the upper and lower with the tail gate. Hope this helps.
Posted via Mobile Device

Blazn C5 · 02-15-2011, 02:11 AM

Quote:

Originally Posted by superflysteiny

I would love to see your ride maybe we could hook up some time

No problem, just let me know what works for you.

**superflysteiny** · 02-15-2011, 04:33 PM

Quote:

Originally Posted by Blazn C5

No problem, just let me know what works for you.

We will have to hook up in the next couple weeks.
Posted via Mobile Device

RCbowtie69 · 02-15-2011, 08:51 PM

Cool build & looking good

**superflysteiny** · 02-16-2011, 02:15 PM

Quote:

Originally Posted by RCbowtie69

Cool build & looking good

Thanks man I am trying to make it as close to restored as I Dan. Should be a clean everyday driver
Posted via Mobile Device

**67cheby** · 02-17-2011, 12:59 PM

been waiting on an update...come on we need some pics !!! LOL just harrassing you

**67cheby** · 02-17-2011, 01:09 PM

been waiting on an update...come on we need some pics !!! LOL just harrassing you

CheyenneShop · 02-18-2011, 12:06 AM

Slacker

68 Quad C10 · 02-18-2011, 11:02 AM

FRENCHBLUE72 · 02-18-2011, 08:38 PM

Im in all your builds are super sick..

**superflysteiny** · 02-19-2011, 02:22 AM

Got home today and picked the frame up. I am a little tired from my trip so did not get alot done but here are some pictures.

**SactoJim** · 02-19-2011, 02:56 AM

Another awesome build, and in my back yard......hope I see it around town.

...on another note, do you still have the front crossmember with suspension and if so, wanna get rid of it. I'm close and would be glad to come get it.......and also get a peek at your projects. Looking for 5 lug for my 68.....thx.

02-12-2011, 12:19 AM	#152
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Pops 72 cheyenne dropmember build Glad I found this thread! You are one hard working mother trucker dude. It's amazing how fast you went from driving a complete truck to scraping the pavement on a full PB setup....amazing __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-13-2011, 03:12 AM	#159
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build It works really good. May have to do it a few times but it works great Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-13-2011, 01:30 PM	#160
nastyc10 Registered User Join Date: Aug 2009 Location: Austin, Tx Posts: 516	Re: Pops 72 cheyenne dropmember build Dude thats gonna be a sweet cruiser! Nice choice of wheels.

02-13-2011, 02:07 PM	#161
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Pops 72 cheyenne dropmember build I have a couple of multi part questions, 1. Does your custom billet side markers utilize a factory reflector/light housing? is it made for L.E.D.? I'm interested in making some similar. 2. Where did you get your upper mouldings? How was the fitment/quality? Did you buy your lower mouldings from them too? Woodgrain or black? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 02-13-2011 at 02:07 PM.

02-14-2011, 07:43 PM	#164
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build I will send you pica when I get back into town as the markers are off right now. The molding kit uses all stock clips and was 875 for the upper and lower with the tail gate. Hope this helps. Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell Last edited by superflysteiny; 02-14-2011 at 07:43 PM.

02-15-2011, 08:51 PM	#167
RCbowtie69 Registered User Join Date: Dec 2003 Location: Thomasville, NC Posts: 1,877	Re: Pops 72 cheyenne dropmember build Cool build & looking good

02-17-2011, 12:59 PM	#169
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build been waiting on an update...come on we need some pics !!! LOL just harrassing you __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-17-2011, 01:09 PM	#170
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Pops 72 cheyenne dropmember build been waiting on an update...come on we need some pics !!! LOL just harrassing you __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-18-2011, 12:06 AM	#171
CheyenneShop Registered User Join Date: Feb 2008 Location: Arizona Posts: 638	Re: Pops 72 cheyenne dropmember build Slacker __________________ 72 Cheyenne shorty "*CheyLow" 72 3/4 long 4X4 69 SWB "Prospector" 68 C/10 shorty - "Picacho"* http://67-72chevytrucks.com/vboard/s...d.php?t=428379 *sold to "93redsled"* Have you heard about *C10 Talk? C10 Talk* is a podcast all about C10 Trucks, the builders, the vendors, and most importantly the C10 Community. Check us out online at www.c10talk.com

02-18-2011, 11:02 AM	#172
68 Quad C10 Registered User Join Date: Jul 2009 Location: Idaho Falls Posts: 324	Re: Pops 72 cheyenne dropmember build __________________ http://www.tandscustomcars.com/ My Quad Cab build:http://67-72chevytrucks.com/vboard/s...d.php?t=352342 IT"S GOT A ROOF NOW WHOO HOO!!!! 65 GTO Build (If you wanna check it out) http://67-72chevytrucks.com/vboard/s...40#post4503040 Last edited by 68 Quad C10; 02-18-2011 at 11:03 AM.

02-18-2011, 08:38 PM	#173
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Pops 72 cheyenne dropmember build Im in all your builds are super sick.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-19-2011, 02:22 AM	#174
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Pops 72 cheyenne dropmember build Got home today and picked the frame up. I am a little tired from my trip so did not get alot done but here are some pictures. __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-19-2011, 02:56 AM	#175
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Pops 72 cheyenne dropmember build Another awesome build, and in my back yard......hope I see it around town. ...on another note, do you still have the front crossmember with suspension and if so, wanna get rid of it. I'm close and would be glad to come get it.......and also get a peek at your projects. Looking for 5 lug for my 68.....thx. __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.