My 1962 C10 Build Thread "Grandpa's Truck " - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**slepysal** · 12-08-2012, 02:25 PM

Man Brian great work ! Can I get some more info on your transmission cross member? Also what did you use for your fuel tank?
I appriciate the tips you have posted in your build thred !

**Bugeyev8** · 12-08-2012, 08:45 PM

Quote:

Originally Posted by slepysal

Man Brian great work ! Can I get some more info on your transmission cross member? Also what did you use for your fuel tank?
I appriciate the tips you have posted in your build thred !

The trans x member I made, its 1x3 rectangle and I sleeved for all the bolt holes, my fuel tank is stock behind the seat tank with a return line added for the efi

come see it any time !

**Captainfab** · 12-09-2012, 02:09 AM

The exhaust does sound good. I didn't see any mufflers. Are you running any?

It seems I have seen an exhaust X like that before. What is it from?

**Bugeyev8** · 12-09-2012, 01:00 PM

Quote:

Originally Posted by Captainfab

The exhaust does sound good. I didn't see any mufflers. Are you running any?

It seems I have seen an exhaust X like that before. What is it from?

Its an x pipe from a 2010 Cadillac ctsv, and there are 3 chamber flowmasters under there, sounds good for a stock engine !

CURSED GEARS · 12-10-2012, 06:43 AM

Read your whole thread, and was sad when I came to the end. I'll have to keep an eye on it, neat stuff!

**Bugeyev8** · 12-10-2012, 11:15 PM

Quote:

Originally Posted by CURSED GEARS

Read your whole thread, and was sad when I came to the end. I'll have to keep an eye on it, neat stuff!

Thanks for the compliment ! Hope I will have some updates soon !

**Bugeyev8** · 03-24-2013, 03:44 PM

got some work done on the 62 today, I cut 1 inch out of the motor mount towers, just a little more bending to make them fit perfect
Posted via Mobile Device

**Bugeyev8** · 01-24-2014, 02:40 PM

Gone ls !

**Bugeyev8** · 01-24-2014, 02:42 PM

filled all unused holes in firewall and flus mounted the vintage air unit,no bolts thru firewal !l

TJ's Chevy · 01-24-2014, 04:22 PM

Just ran across this build! Great work so far!

Bomp · 01-24-2014, 11:05 PM

Slick work on the firewall !

**Captainfab** · 01-25-2014, 01:44 AM

Just what I thought you were doing after having seen your ads in the classifieds. What size LSx are you going with?

**Bugeyev8** · 01-25-2014, 12:06 PM

Quote:

Originally Posted by Captainfab

Just what I thought you were doing after having seen your ads in the classifieds. What size LSx are you going with?

I got a deal on a 2006 5.3 with 38k miles so the choice was easy

**Bugeyev8** · 01-25-2014, 12:09 PM

Quote:

Originally Posted by Bomp

Slick work on the firewall !

Thanks ! I have been following your thread for a while too, seeing the progress on your truck and a few others here gives me some motivation to work on mine

64jmb · 02-21-2015, 01:14 AM

Hello,
I have a original 1962 C10 Custom Cab Long bed also that is pretty much a 1 owner truck since 1962 other than me getting it recently, with a great story also. But I was very curious, you mentioned that your grandpa ordered his with a corvette 283. Mine is very original also and it has a 4 barrel and a cake dish snorkel type air cleaner similar like on the C30 C50 series that has the 327. Did your grandpas engine look like that also? Let me know. I think mine is all original like the way it came possibly.

**Bugeyev8** · 05-16-2015, 12:08 AM

got back to work on the 62..got the suspension all test fitted to frame ...next the LS engine and trans test fit

**Bugeyev8** · 05-16-2015, 12:11 AM

more pics

**slepysal** · 05-16-2015, 12:47 AM

right on !! looks great

**Captainfab** · 05-17-2015, 01:01 AM

Looks great

How did you mount the rack and pinion?

**Bugeyev8** · 05-18-2015, 09:09 PM

Quote:

Originally Posted by Captainfab

Looks great

How did you mount the rack and pinion?

its a No Limit r&p kit I modified for the 62 frame, very nice kit and great customer service

**Bugeyev8** · 05-22-2015, 01:09 AM

more progress

hotrod66 · 05-22-2015, 07:21 PM

Come along way keep it up!

**Bugeyev8** · 05-24-2015, 01:35 AM

Quote:

Originally Posted by hotrod66

Come along way keep it up!

thanks

its been way too long since I've worked on it, good to be back to it

Posted via Mobile Device

hjmags62 · 06-05-2015, 08:43 PM

Posted via Mobile Device

hjmags62 · 06-05-2015, 08:50 PM

Quote:

Originally Posted by hjmags62

Posted via Mobile Device

Hi...new to this blog. Read your all your threads. AWESOME!!! What a great job you're doing. I have a 62 factory automatic deluxe custom cab BBW shortbed. She's a little rough around the edges but complete. I'm in the process of restoring her. You have inspired me to start working on her again. Reading your threads just gave me a lot more motivation. Thank you and keep up the great work!!
Posted via Mobile Device

12-08-2012, 02:25 PM	#151
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: My 1962 C10 Build Thread "Grandpa's Truck " Man Brian great work ! Can I get some more info on your transmission cross member? Also what did you use for your fuel tank? I appriciate the tips you have posted in your build thred ! __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

12-09-2012, 02:09 AM	#153
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: My 1962 C10 Build Thread "Grandpa's Truck " The exhaust does sound good. I didn't see any mufflers. Are you running any? It seems I have seen an exhaust X like that before. What is it from? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-10-2012, 06:43 AM	#155
CURSED GEARS Registered User Join Date: Aug 2010 Location: Lafayette In. Posts: 252	Re: My 1962 C10 Build Thread "Grandpa's Truck " Read your whole thread, and was sad when I came to the end. I'll have to keep an eye on it, neat stuff!

03-24-2013, 03:44 PM	#157
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " got some work done on the 62 today, I cut 1 inch out of the motor mount towers, just a little more bending to make them fit perfect Posted via Mobile Device Attached Images

01-24-2014, 02:40 PM	#158
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " Gone ls ! Attached Images

01-24-2014, 02:42 PM	#159
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " filled all unused holes in firewall and flus mounted the vintage air unit,no bolts thru firewal !l Attached Images

01-24-2014, 04:22 PM	#160
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: My 1962 C10 Build Thread "Grandpa's Truck " Just ran across this build! Great work so far! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

01-24-2014, 11:05 PM	#161
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: My 1962 C10 Build Thread "Grandpa's Truck " Slick work on the firewall !

01-25-2014, 01:44 AM	#162
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: My 1962 C10 Build Thread "Grandpa's Truck " Just what I thought you were doing after having seen your ads in the classifieds. What size LSx are you going with? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-21-2015, 01:14 AM	#165
64jmb Registered User Join Date: Jan 2014 Location: Phoenix, AZ Posts: 366	Re: My 1962 C10 Build Thread "Grandpa's Truck " Hello, I have a original 1962 C10 Custom Cab Long bed also that is pretty much a 1 owner truck since 1962 other than me getting it recently, with a great story also. But I was very curious, you mentioned that your grandpa ordered his with a corvette 283. Mine is very original also and it has a 4 barrel and a cake dish snorkel type air cleaner similar like on the C30 C50 series that has the 327. Did your grandpas engine look like that also? Let me know. I think mine is all original like the way it came possibly.

05-16-2015, 12:08 AM	#166
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " got back to work on the 62..got the suspension all test fitted to frame ...next the LS engine and trans test fit Attached Images

05-16-2015, 12:11 AM	#167
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " more pics Attached Images

05-16-2015, 12:47 AM	#168
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: My 1962 C10 Build Thread "Grandpa's Truck " right on !! looks great __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

05-17-2015, 01:01 AM	#169
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: My 1962 C10 Build Thread "Grandpa's Truck " Looks great How did you mount the rack and pinion? __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-22-2015, 01:09 AM	#171
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: My 1962 C10 Build Thread "Grandpa's Truck " more progress Attached Images



Register or Log In To remove these advertisements.

05-22-2015, 07:21 PM	#172
hotrod66 Registered User Join Date: Jun 2008 Location: space station delta farce (justin tx) Posts: 594	Re: My 1962 C10 Build Thread "Grandpa's Truck " Come along way keep it up! __________________ Between saying and doing many a pair of shoes are worn out

06-05-2015, 08:43 PM	#174
hjmags62 Registered User Join Date: Jun 2015 Location: buena park, Ca Posts: 4	Re: My 1962 C10 Build Thread "Grandpa's Truck " Posted via Mobile Device

Register or Log In To remove these advertisements.