![]() |
![]() |
#151 |
Senior Member
![]() Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,923
|
Re: CRGRS 66 – Winter Build Thread
glad to see the recent posts...you're back, craigger. looking good over at your shop and some nice project progress also. keep'er going buddy...
|
![]() |
![]() |
![]() |
#152 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
The bolt pattern on the back of the booster is 3-3/8" x 3-3/8", I will take a reading on using the brackets that came with the booster. Captain, I will let you know and make one order when I decide. I have a T5 with floor a shifter, no issues there.
Well, here I am on page 7... don't feel like I have accomplished much, but moving ahead slowly. Found a guy who does sandblasting for cheap (he has a 72 C10, so the price kinda came down the more we talked ![]() Hey, I want to paint the MC reservoir and lid, what paint will stand up to brake fluid?
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 Last edited by CRGRS 66; 02-19-2013 at 01:52 PM. |
![]() |
![]() |
![]() |
#153 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
OK, that didn't take long, non of the holes line up. Captain, could you please PM me the total amount for the PS bracket, flange and sleeve, and booster bracket?
Thanks!
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#154 | ||
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
Quote:
Quote:
Thanks Clem, wish I had the time and resources to fly through my build the way you did with razor back red!!
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
||
![]() |
![]() |
![]() |
#155 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: CRGRS 66 – Winter Build Thread
Yep, just like I said. Those brackets are just universal brackets and you have to drill holes to bolt them to the firewall. I'll send you a PM.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#156 |
Registered User
Join Date: Jan 2008
Location: oldfort tn
Posts: 1,183
|
Re: CRGRS 66 – Winter Build Thread
i feel your pain buddy, thats the kind of luck i have.
__________________
my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion |
![]() |
![]() |
![]() |
#157 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
No pain at all, I look at it every day, and every day it makes me smile
![]() Okay, have been making a bit of progress, tore out the wiring harness, inside heater components, brake/clutch pedal bracket, etc. Only one bolt left in the firewall that I need a another pair of hands on the other side to remove, then I can clean up and paint the firewall. Just about ready to put some POR15 on the frame (bab forward anyway), and dropped off front cross member and lower control arms to a new buddy to sandblast. Dang cold out there tonight, but an hour here, and an hour there is better than no progress at all. Hope to be ready to put the cross member back on by the end of the weekend, and start building the suspension back up. Must sign off now, and send the captain some $$$ ![]()
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#158 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
found a 73-74 malibou with a small block in it, can anyone tell me if the power steering pump brackets will work with my standard crank and water pump pulley?
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#159 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
also found a 66 long fleet, scavenged the firewall heater delete plate, and the washer fluid jar bracket, may go back for a couple other bits and pieces if I go back for the power steering pump goods from the malibou (same yard)
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#160 |
Registered User
Join Date: Jan 2008
Location: oldfort tn
Posts: 1,183
|
Re: CRGRS 66 – Winter Build Thread
if your running a long water pump it will work, but not with a short one. thats a long water pump set-up in the picture.
__________________
my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion |
![]() |
![]() |
![]() |
#161 |
Registered User
![]() Join Date: Mar 2012
Location: Shallow Lake Ontario,Canada
Posts: 201
|
Re: CRGRS 66 – Winter Build Thread
Like Flip says as long as you have same water pump it will work, if you get it get all the pulleys too just to be sure, the hoses may be a bit short though being from a car with box mounted inside the frame.
|
![]() |
![]() |
![]() |
#162 | |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: CRGRS 66 – Winter Build Thread
Quote:
![]()
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502 |
|
![]() |
![]() |
![]() |
#163 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: CRGRS 66 – Winter Build Thread
X3 on the PS pump being for a long water pump. To expand on that some, you will also need heads with the accessory holes to correctly mount that pump and brackets.
All trucks '72 and earlier originally were equipped with short water pumps.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#164 | ||
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
Quote:
Quote:
I see that brothers has a bracket kit http://www.brotherstrucks.com/prodin...number=PSPB766 expensive though, $59.99, but I may have to bite the bullet. Has anyone used this bracket?
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
||
![]() |
![]() |
![]() |
#165 |
Active Member
![]() Join Date: Aug 2012
Location: Central Illinois
Posts: 103
|
Re: CRGRS 66 – Winter Build Thread
If you are going to use a short water pump, try to find a power steering pump setup from the following vehicles: '64-'67 truck, '68-'72 truck, '65-68 full size passenger car, or '64-68 Chevelle. All of these used a short water pump. Be sure to get all the brackets and pulleys.
I'm sure that trying to find parts cars in your area is difficult. I'd place an ad on Craigslist and a local area trading paper. |
![]() |
![]() |
![]() |
#166 | |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
Quote:
![]()
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
|
![]() |
![]() |
![]() |
#167 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
Okay, this thread is going to be going in a bit of a different direction. My plan was to make the upgrades I had planned for this winter and get it back on the road in the spring or early summer. I have now decided to get the bed and the cab off and get the frame blasted and painted. This in itself is not that difficult to do, but will undoubtedly delay getting back to driving it. I still hope to get back behind the wheel by the fall.
This is what Alan had to say at the top of page #2: "Ok, I'm here and tuned in. Sounds like a great plan, let's see what snowballs once you get started. ![]() ![]() Thanks Alan! I have a lot of other stuff done already suspension wise so I should end up with a rolling chassis fairly quickly. The bright side is that I have my weekends and evenings all planned out for the summer now ![]()
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#168 |
60-66 Nut
![]() ![]() Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: CRGRS 66 – Winter Build Thread
That bracket that Brothers has pictured is for an '59 and earlier installation that uses the front motor mounts.
I would also check the '67-'72 classifieds here on the forum. There was a pump and bracket in the '60-'66 classifieds that sold just this past week. I have seen them on ebay as well. Another place to check is http://www.alangrovecomponents.com they make some real nice aftermarket brackets.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
![]() |
![]() |
![]() |
#169 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
Great weekend to be out working on the truck!!!!!! It got up to about 11 or 12 Canadian degrees yesterday, which is approximately 52 American degrees.
With a little help on Friday evening I got the bed off, then the evening turned to the quaffing of Ales. My daughter came and helped me on Saturday, off with the wheels, and rear bumper. Started mocking up the porterbuilt trac bar, and shock relocate brackets. On my own Sunday finished mocking up above mentioned, and mocked up the rear sway bar. Then off with all of that along with all of the rear suspension. Just a couple nuisance items to remove at the back end, brake line connections, support for the dif vent hose, and a ground wire connection. Should have the cab and frame separated next weekend, then I can send out the frame and trailing arms for blasting and painting. I say separate as you will see when I get to it, I will not actually be lifting the cab, but lowering the frame away from it. It felt so good to have some serious time to spend wrenching, grinding, and BFH'ing! Still need to remove passenger door, and fuel tank. Hope to do that one night this week. Note my liquid reward on the pass side frame rail..... ahhhhhh
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#170 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
Oh, I forgot. After about the hottest most wonderful shower in the history of hot showers, I donned my favorite tee shirt, and chilled
![]()
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#171 |
Registered User
Join Date: Jul 2010
Location: Bancroft, ontario
Posts: 554
|
Re: CRGRS 66 – Winter Build Thread
Hey graigerr,you know about bills truck shop out oshawa way right,check website,tons of parts
Posted via Mobile Device |
![]() |
![]() |
![]() |
#172 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
Yes i do, thanks, I find his prices to be very high. I emailed him last week to see if he wanted to give pricing on a list i have, he replied and asked me to send the list. I sent him the list...no reply to date. I would like to buy from him, but i gotta watch my $$$. Did you get your 283 done, and get some miles on yours last year?
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
#173 |
Registered User
Join Date: Jul 2010
Location: Bancroft, ontario
Posts: 554
|
Re: CRGRS 66 – Winter Build Thread
Oh,never bought anything from them,good to know.yes 283 is built t5 is built,no miles yet,long way to go when you completley strip them down,gotta watch my $$$ too!one day i hope!!!!
![]() Posted via Mobile Device |
![]() |
![]() |
![]() |
#174 |
Registered User
Join Date: Jan 2008
Location: oldfort tn
Posts: 1,183
|
Re: CRGRS 66 – Winter Build Thread
looking good,now cmes the ugly part ..cleaning
![]()
__________________
my 65 fleetside build http://67-72chevytrucks.com/vboard/s...d.php?t=442370 big back glass conversion http://67-72chevytrucks.com/vboard/s...dow+conversion |
![]() |
![]() |
![]() |
#175 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: CRGRS 66 – Winter Build Thread
One step closer to the nasty cleaning part of things. Came home from work a little early today removed the passenger door, removed the cab bolts, and removed the cab. A little tricky on my own (never done this before you know), between jack stands, paving stones, floor jack, and an engine hoist, got er done in about an hour. The big steel cart is an item that was taking up space at work, and they wanted to get rid of it.... I thought to myself "self, your cab will fit on that thing and you can move it around the garage with the greates of ease"!
Some minor adjustments to make to the frame, remove all the bits and pieces from the diff, and need to get the bushings out of the trailing arms, then they all go off to the blaster, who will also paint them with my POR15. Then the wire wheel on the DA to the firewall, underside, and inside of the cab. fun, fun, fun
__________________
Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709 |
![]() |
![]() |
![]() |
Bookmarks |
|
|