67 SWB Crewcab....Building the Beast, aka Donkey! - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Hart_Rod** · 06-22-2007, 06:53 PM

Some more pics. Going to hit it with a little sand tomorrow, throw some DP primer on it then back on the new chassis. Here's a picture of the old chasiss, it's looking a little lonely,

.

RACINJASON22 · 06-22-2007, 07:48 PM

Looking Good.

RJ22...

68GMC454 · 06-22-2007, 07:58 PM

so if this one is donkey,,does that make the burb,,shrek?????? sure looks good,,your getting alot done...

**Palf70Step** · 06-22-2007, 08:20 PM

I like that combo idea....Shrek and Donkey

Guess the 48/52 can be the cat....I forgot the name

**yote1234** · 06-22-2007, 08:43 PM

you shure are a talented craftsman! great job!

**Hart_Rod** · 06-22-2007, 09:18 PM

Quote:

Originally Posted by 68GMC454

so if this one is donkey,,does that make the burb,,shrek?????? sure looks good,,your getting alot done...

Quote:

Originally Posted by Palf70Step

I like that combo idea....Shrek and Donkey

Guess the 48/52 can be the cat....I forgot the name

Puss N Boots, I think...

Quote:

Originally Posted by yote1234

you shure are a talented craftsman! great job!

Thanks! I've got more done on "Donkey" in a shorter amount of time than any of my projects. I really can't wait to drive it!

BarryB · 06-22-2007, 09:56 PM

("Guess the 48/52 can be the cat....I forgot the name ")
Puss N Boots is the name of the cat. voiced by Antonio Banderas.

**Hart_Rod** · 06-25-2007, 10:31 PM

Almost have the cab sandblasted. Should have it done by tomorrow if it doesn't rain. Throw some primer on and back on the chassis until I'm ready to finish it.

**Yukon Jack** · 06-26-2007, 10:16 AM

That cab is so perfectly done!

**Hart_Rod** · 06-27-2007, 10:54 PM

Quote:

Originally Posted by Yukon Jack

That cab is so perfectly done!

I plan on making a few changes but not many,

.

It's black again!!!!!

subtle71 · 06-27-2007, 11:28 PM

I can't remember the last time I saw a dash that wasn't all hacked up around the radio or holes where misc. items were attached to the dash over the years! Looking good. What color are you thinking of going with for the exterior? At this pace, you will have it and the 'burb ready for Cruisin' the Coast!

Later Rob!
Dean

**Hart_Rod** · 06-27-2007, 11:49 PM

Quote:

Originally Posted by subtle71

I can't remember the last time I saw a dash that wasn't all hacked up around the radio or holes where misc. items were attached to the dash over the years! Looking good. What color are you thinking of going with for the exterior? At this pace, you will have it and the 'burb ready for Cruisin' the Coast!

Later Rob!
Dean

Thanks Dean. The dash and firewall are pretty incredible. It's got some bumps and bruises elsewhere and a little rot in the floors, but it has less rust issues than the Burb did. As far as being ready by Cruzin the Coast,

, maybe next year. I'm leaving for NM the first week of August, so progress will come to a screeching halt for a while,

. But, I will have them both at a good stopping place.

R

krue · 07-05-2007, 02:01 AM

Renamed like you wanted. Whatcha doin' in NM?

**Hart_Rod** · 07-05-2007, 08:47 AM

Quote:

Originally Posted by krue

Renamed like you wanted. Whatcha doin' in NM?

Thanks for updating the thread Krue. I'm going to be the Commanding Officer of the Albuquerque Navy Reserve Center.

rlm316 · 07-05-2007, 09:07 AM

Rob, That is on its way to being one very cool ride! I can't wait to see the finished product. Quick question, Why didn't you use the original frame and cut it down? By the way, good luck on the move. Lane

**Hart_Rod** · 07-05-2007, 03:35 PM

Quote:

Originally Posted by rlm316

Rob, That is on its way to being one very cool ride! I can't wait to see the finished product. Quick question, Why didn't you use the original frame and cut it down? By the way, good luck on the move. Lane

Thanks Lane. The original frame was a long wheel base 3/4 ton frame that had already been stretched under the cab (the frame was cut in half and 33" were added in). This seemed like the strongest way to do it, only one 45 degree cut on each side and it's already set up for a 6 1/2' bed.

LOW DOUGH · 07-05-2007, 07:29 PM

cool

**Hart_Rod** · 07-05-2007, 11:58 PM

I've been working with Stan at ECE on a bolt in crossmember for the 4L60E to go along with their 5.3 motor mounts. Here's the first proto-type. It uses factory mounting holes and the 4L60E one stud rubber mount. Hopefully Stan can get the headers figured out with Sanderson and then they will be able to sell a 5.3/4L60E install kit,

.

GREASEMONKEY72 · 07-06-2007, 12:07 AM

cab looks nice all flat black, do you know what the finial color will be?

Chevy_Man · 07-06-2007, 10:30 AM

Hey Rob you want to come motavate me to build my truck.....lol love the work can't wait to see it finshed....

Eric

**Hart_Rod** · 07-06-2007, 12:44 PM

Quote:

Originally Posted by GREASEMONKEY72

cab looks nice all flat black, do you know what the finial color will be?

I haven't quite decided. I'm pretty sure it will be a two tone, with the top of the cab white and some other color. Considering a dark green with no metal flake in it.

Quote:

Originally Posted by Chevy_Man

Hey Rob you want to come motivate me to build my truck.....lol love the work can't wait to see it finshed....

Eric

Thanks Eric. I try to do a little something every day, even if it's just sitting and staring at it,

.

R

pcmcobra · 07-06-2007, 01:52 PM

Rob,
looking good. I need to come by and see progress. If it ever stops raining for more than a few hours.

FRENCHBLUE72 · 07-08-2007, 01:35 PM

Looks good rob keep up the good work..

OlChev67 · 07-08-2007, 02:17 PM

This is such a cool build. You do some great work.

msgross · 07-08-2007, 03:13 PM

I might have missed it but what did you blast the cab with?

06-22-2007, 06:53 PM	#151
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: Finally got the beast home...... Some more pics. Going to hit it with a little sand tomorrow, throw some DP primer on it then back on the new chassis. Here's a picture of the old chasiss, it's looking a little lonely, . Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-22-2007, 07:48 PM	#152
RACINJASON22 GEARHEAD Join Date: Jan 2007 Location: CENTRAL,PA Posts: 2,284	Re: Finally got the beast home...... Looking Good. RJ22... __________________ 72 SWB 2WD MY PROJECT 72 LWB 4X4 FUTURE PROJECT SUBSCRIBE HEREBOARD VENDORS HERE NORWOOD MEET SURVIVOR!

06-22-2007, 07:58 PM	#153
68GMC454 THE VILLIAGE IDIOT Join Date: Nov 2006 Location: Tooele, Utah Posts: 1,405	Re: Finally got the beast home...... so if this one is donkey,,does that make the burb,,shrek?????? sure looks good,,your getting alot done... __________________ honestly honey,,i have no idea how that truck got here.

06-22-2007, 08:20 PM	#154
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,090	Re: Finally got the beast home...... I like that combo idea....Shrek and Donkey Guess the 48/52 can be the cat....I forgot the name __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

06-22-2007, 08:43 PM	#155
yote1234 Senior Member Join Date: Feb 2003 Location: Gold Canyon Arizona Posts: 4,386	Re: Finally got the beast home...... you shure are a talented craftsman! great job! __________________ 1971 K5 CST Blazer 1951 -3100 5 window short bed 4sp 1965 Chevelle Malibu 283 (sadly sold) 1968 Camaro 327 1968 Honda mini-trail z50a #377 1966 uh 1-D Huey

06-22-2007, 09:56 PM	#157
BarryB Senior Member Join Date: Jul 2006 Location: Blountville, Tn. Posts: 3,904	Re: Finally got the beast home...... ("Guess the 48/52 can be the cat....I forgot the name ") Puss N Boots is the name of the cat. voiced by Antonio Banderas. __________________ We could learn a lot from crayons... Some are sharp; some are pretty;and some are dull. Some have weird names; and all are different colours;but they all have to live in the same box. You may be only one person in the world, But you may also be the world to one person. * Some mistakes are too much fun to only make once. Two rules in life. 1. Never sweat the small stuff! 2. Everything is small stuff! Last edited by BarryB; 06-22-2007 at 09:56 PM.

06-25-2007, 10:31 PM	#158
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: Finally got the beast home...... Almost have the cab sandblasted. Should have it done by tomorrow if it doesn't rain. Throw some primer on and back on the chassis until I'm ready to finish it. Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

06-26-2007, 10:16 AM	#159
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: Finally got the beast home...... That cab is so perfectly done! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

06-27-2007, 11:28 PM	#161
subtle71 Granddad's Ol' Truck Join Date: Jan 2005 Location: MS Posts: 588	Re: Finally got the beast home...... I can't remember the last time I saw a dash that wasn't all hacked up around the radio or holes where misc. items were attached to the dash over the years! Looking good. What color are you thinking of going with for the exterior? At this pace, you will have it and the 'burb ready for Cruisin' the Coast! Later Rob! Dean __________________ *1971 Chevrolet Custom 10 short step-side* *2005 GMC Sierra SLT 2500HD crew cab 2wd* [I]1971 Chevrolet Custom 10 Deluxe lwb fleet-side

07-05-2007, 02:01 AM	#163
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: Building the Beast, aka Donkey! Renamed like you wanted. Whatcha doin' in NM? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-05-2007, 09:07 AM	#165
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: Building the Beast, aka Donkey! Rob, That is on its way to being one very cool ride! I can't wait to see the finished product. Quick question, Why didn't you use the original frame and cut it down? By the way, good luck on the move. Lane

07-05-2007, 07:29 PM	#167
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Building the Beast, aka Donkey! cool

07-05-2007, 11:58 PM	#168
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: Building the Beast, aka Donkey! I've been working with Stan at ECE on a bolt in crossmember for the 4L60E to go along with their 5.3 motor mounts. Here's the first proto-type. It uses factory mounting holes and the 4L60E one stud rubber mount. Hopefully Stan can get the headers figured out with Sanderson and then they will be able to sell a 5.3/4L60E install kit, . Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-06-2007, 12:07 AM	#169
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Building the Beast, aka Donkey! cab looks nice all flat black, do you know what the finial color will be? __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

07-06-2007, 10:30 AM	#170
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: Building the Beast, aka Donkey! Hey Rob you want to come motavate me to build my truck.....lol love the work can't wait to see it finshed.... Eric __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons



Register or Log In To remove these advertisements.

07-06-2007, 01:52 PM	#172
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: Building the Beast, aka Donkey! Rob, looking good. I need to come by and see progress. If it ever stops raining for more than a few hours. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

07-08-2007, 01:35 PM	#173
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Building the Beast, aka Donkey! Looks good rob keep up the good work.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-08-2007, 02:17 PM	#174
OlChev67 Ever heard of Beech Island?? Join Date: Apr 2007 Location: Clemson, SC Posts: 327	Re: Building the Beast, aka Donkey! This is such a cool build. You do some great work.

07-08-2007, 03:13 PM	#175
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Building the Beast, aka Donkey! I might have missed it but what did you blast the cab with? __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

Register or Log In To remove these advertisements.