![]() |
|
![]() |
#1 |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
Nothing special, I bent a small semi-hook at the bottom of a tapered pry bar and cammed off the forward hinge mount bolt to pull the spring toward the firewall and hook/unhook, it's easier with the hood removed.
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: 1958 Apache 38 Dually Dump Project
I have seen them spread with a floor jack and wrenchs inserted into the opened spring. Attach and pull the wrenchs. I always just used a brake spring tool or grabbed them with vice grips and strong armed it.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project Last edited by OrrieG; 01-01-2011 at 02:41 PM. |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Nov 2008
Location: Prince George, BC, CAN
Posts: 60
|
Re: 1958 Apache 38 Dually Dump Project
Yeah... vice grips and a quick tug seemed to be the fastest, easiest way for me, too. New hinges are nice.
__________________
If the women don't find you handsome, they should at least find you handy... Red Green Keep your stick on the ice, Woodbutcher |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
Worked on the front axle a bit this weekend. Thought I'd have to get a new carrier because of worn spiders/cross pin and was thinking a detroit, but didn't want to spend the money for it. Fortunately, we were able to salvage parts from another old carrier, get a passable pattern on the old R&P, and reuse the open carrier.
So the front is together and ready, but I'm still struggling with pulling a NV4500/205 together on the cheap...looks like I'm going to bite the bullet and have one built. I want to pull this into a buddy's shop within the next few weeks and start the tear down.
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Aug 2007
Location: Corona, California
Posts: 7,998
|
Re: 1958 Apache 38 Dually Dump Project
That does look great.
Kim |
![]() |
![]() |
![]() |
#6 |
Resident of Here
Join Date: May 2008
Location: Wesley Chapel, FL, USA
Posts: 7,716
|
Re: 1958 Apache 38 Dually Dump Project
Updates?! Lovin it! I'd love to have a 4x4 Apache.
__________________
~Bradley~ 2004 Black GTO LS2/T56 too much to list ![]() Miss having a truck ![]() |
![]() |
![]() |
![]() |
#7 |
high-Tech Red Neck
Join Date: Feb 2008
Location: Livingston, MT/On my boat WA/BC/AK
Posts: 2,294
|
Re: 1958 Apache 38 Dually Dump Project
That is a way cool truck man, you have to love the 1 tons, they are just awesome.
I will be looking forward to seeing how it turns out.
__________________
"He used to be a pretty nice feller, now he's a welder!" |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Sep 2010
Location: virginia
Posts: 12
|
Re: 1958 Apache 38 Dually Dump Project
sweet!
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Dec 2010
Location: sooke canada
Posts: 211
|
Re: 1958 Apache 38 Dually Dump Project
im brining this one alive to lol. i love your builds. the motor in?
__________________
chevys the way to go. ![]() ![]() |
![]() |
![]() |
![]() |
#10 |
Resident of Here
Join Date: May 2008
Location: Wesley Chapel, FL, USA
Posts: 7,716
|
Re: 1958 Apache 38 Dually Dump Project
Updates?
__________________
~Bradley~ 2004 Black GTO LS2/T56 too much to list ![]() Miss having a truck ![]() |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
Well, I'm still working on pulling the drivetrain together before tearing it down.
The NV4500 has been built for a few weeks now and we're waiting on a new input shaft for a dodge 205 and adapter we picked up that was originally behind a 4500. Turned out to have a few issues, but after combining parts from both the 205s we have and chasing a couple new pieces (that were a challenge to source) we will hopefully have everything together in the next week or two. At that point, I'm really hoping to be able to make enough time to get it on a buddy's lift and start tearing into it.
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
Wow, didn't realize how much time has passed with so little progress. We've been driving this around when we can and gathering parts when we can't.
I've been working with Blumenthal Companies here in OKC on pulling together everything needed to drop a NV4500/205 behind the BBC. Initially, I was very disappointed with the lack of progress and misinformation I was being fed by an individual within the organization and had made the decision to take my business elsewhere...after a few months of being mislead! I did, however, recognize that Blumenthal's is a leader in their industry and was the most capable of building exactly what I wanted. I contacted a general manager within the company, explained my poor experience, and was pleasantly surprised to find them apologetic, accommodating, and eager to reverse my sour impression. From that point forward, progress was still slow, but I was kept updated with honest information and knew that they were making every effort to build what I wanted at a reasonable cost. After a bit of parts chasing, some back and forth with Advance Adapters, and pieces from a number of 205's, I have a 5.61 4500 with the 29 spline output rear to a dodge 205 (completely rebuilt w/32 spline f/r) and a chevy 10 spline input with AA bell housing. Also picked up a used ORD passenger hi-steer arm ![]()
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Jan 2011
Location: Delaware and Long Island, New York
Posts: 3,455
|
Re: 1958 Apache 38 Dually Dump Project
great build guys, love the whole story,keep up the awesome work!!!
|
![]() |
![]() |
![]() |
#14 |
Chevy Enthusiast
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
|
Re: 1958 Apache 38 Dually Dump Project
Very nice!
__________________
Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress) |
![]() |
![]() |
![]() |
#15 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: 1958 Apache 38 Dually Dump Project
Great parts! It is looking great. What spring hangers are you going to go with in the front?
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#16 | |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
Quote:
![]()
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
|
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
Quote:
![]() I'll probably just make the hangers/shackles, still haven't decided which front springs to go with. The longer (52-56") versions ride better but start driving the need for a track bar and I'd rather not introduce that into the mix. Still working on that...
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
|
![]() |
![]() |
![]() |
#18 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: 1958 Apache 38 Dually Dump Project
Are you going to be able to retain your stock wheels with the new front axle? This thing is going to be killer. Heck it already is.
![]()
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#19 |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
The wheels aren't stock, but yes, I plan on running the 19.5 wheels that are on the truck now.
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
![]() |
![]() |
![]() |
#20 |
6>8 Plugless........
![]() Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,140
|
Re: 1958 Apache 38 Dually Dump Project
Oh, cool deal. Are the P-30 chassis style 8 lug 19.5 wheels found on some bread trucks?
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
![]() |
![]() |
![]() |
#21 | |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
Quote:
![]() ![]()
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
|
![]() |
![]() |
![]() |
#22 |
Registered User
Join Date: Jun 2010
Location: Oklahoma City, OK
Posts: 1,519
|
Re: 1958 Apache 38 Dually Dump Project
Still gathering parts...installed a 11" CF2 clutch along with a hi-torque starter before bolting it all together to check clearances and work out details with the slave cylinder, PTO, and TC shifters.
Since it's cooled down a bit, my son and I spent a couple hours in the garage making a stand to hold the drivetrain up. ![]() ![]()
__________________
1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread |
![]() |
![]() |
![]() |
#23 |
Chevy Enthusiast
Join Date: Jul 2009
Location: Canyon Lake Texas
Posts: 2,024
|
Re: 1958 Apache 38 Dually Dump Project
Those are cool! There's a gmc cummins on craigslist with some, I like the way they look. http://houston.craigslist.org/cto/2486327387.html
![]() ![]() ![]() ![]()
__________________
Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress) |
![]() |
![]() |
![]() |
#24 |
Resident of Here
Join Date: May 2008
Location: Wesley Chapel, FL, USA
Posts: 7,716
|
Re: 1958 Apache 38 Dually Dump Project
Very nice!
__________________
~Bradley~ 2004 Black GTO LS2/T56 too much to list ![]() Miss having a truck ![]() |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Feb 2009
Location: Oklahoma
Posts: 7,461
|
Re: 1958 Apache 38 Dually Dump Project
That engine and tranny looks good.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|