Do you need '64-'66 Chevy Truck Parts? - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*LILRED66* · 04-08-2008, 02:59 PM

Quote:

Originally Posted by shortbed70

I am looking at getting the rear tail light sections for my 65 from top to bottom. The pieces of bodywork on both sides of the tailgate. Do you have any and what would you ship to 66535?

Thanks for your interest in my 4-5-6 Chevy Truck parts. I have a few pairs of rear fleetside bed tail light panels for a '60-'66 Chevy truck. They will be removed just in front of the vertical seam, so they will need to be trimmed to fit. They are shells and do not include the tailgate chains, tail light assemblies or reverse light assemblies.

The pair is $150.00, plus $40.00 packaging & shipping, via UPS, Ground. Let me know your thoughts with these parts or other 4-5-6 Chevy Truck parts and I will proceed accordingly.

truckn' · 04-09-2008, 01:28 PM

Tony do you happen to have a big tranny hump laying around? Wanting to put 4 speed in and will have to change out.

*LILRED66* · 04-09-2008, 06:31 PM

Quote:

Originally Posted by truckn'

Tony do you happen to have a big tranny hump laying around? Wanting to put 4 speed in and will have to change out.

I have a high hump tranny cover. I will send you a PM with this information. Thanks for your interest in my 4-5-6 Chevy Truck parts and let me know if I can help you with this part or other 4-5-6 Chevy Truck parts in the future.

botsdots · 04-09-2008, 11:24 PM

Tony, I sent you a PM regarding cab mount perches.

Thanks,
Daniel

*LILRED66* · 04-10-2008, 04:55 PM

Quote:

Originally Posted by botsdots

Tony, I sent you a PM regarding cab mount perches.

Thanks,
Daniel

Daniel:

You have a PM in response to your request for rear cab-to-frame mount perches. Thanks for your continued interest in my 4-5-6 Chevy Truck parts. Please let me know if I can help you with these parts or other 4-5-6 Chevy Truck parts in the future.

shortbed70 · 04-11-2008, 06:09 AM

Would you be interested in selling just one side and is me picking them up ok? I'm not that far away. Thanks.

Quote:

Originally Posted by LILRED66

Thanks for your interest in my 4-5-6 Chevy Truck parts. I have a few pairs of rear fleetside bed tail light panels for a '60-'66 Chevy truck. They will be removed just in front of the vertical seam, so they will need to be trimmed to fit. They are shells and do not include the tailgate chains, tail light assemblies or reverse light assemblies.

The pair is $150.00, plus $40.00 packaging & shipping, via UPS, Ground. Let me know your thoughts with these parts or other 4-5-6 Chevy Truck parts and I will proceed accordingly.

*LILRED66* · 04-11-2008, 05:14 PM

Dave:

Glad to hear you made it home safely. I hope all the 4-5-6 Chevy Truck parts help you get your rig back on the road. Thanks for your business and let me know if I can help you other 4-5-6 Chevy Truck parts in the future.

PS-Post some pictures of your rig when you get it back together. Take care.

68c10owner · 04-15-2008, 08:17 AM

Tony, would you happen to have a nice 62 chevy grill?

*LILRED66* · 04-16-2008, 12:04 AM

Quote:

Originally Posted by 68c10owner

Tony, would you happen to have a nice 62 chevy grill?

Thanks for your interest in my 4-5-6 Chevy Truck parts. I do not have any '62 grille assemblies at this time.

You may check with RJ on www.stovebolt.com. He is a very good source of '60-'66 Chevy Trucks and parts.

Sorry I couldn't better assist you with your parts needs and please keep me in mind for your other 4-5-6 Chevy Truck parts needs in the future.

*LILRED66* · 05-25-2008, 05:56 PM

Quote:

Originally Posted by 68c10owner

Tony, would you happen to have a nice 62 chevy grill?

Anthony:

I don't have a '62 grille assembly at this time. Sorry I couldn't help.

63Stepside · 04-17-2008, 10:59 PM

looking for a rear end with 3.38 gears for my '63. can you help?

64Magoo · 04-19-2008, 08:27 PM

How much for a spare tire hanger on a 64 LWB?

*LILRED66* · 04-22-2008, 02:16 AM

Quote:

Originally Posted by 64Magoo

How much for a spare tire hanger on a 64 LWB?

Thanks for the inquiry. Please check your PM regarding a 4-5-6 Chevy Truck under-bed spare tire carrier. Thanks for your interest and please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

*LILRED66* · 04-22-2008, 02:13 AM

Quote:

Originally Posted by 63Stepside

looking for a rear end with 3.38 gears for my '63. can you help?

Hi and thanks for the 4-5-6 Chevy Truck parts inquiry. The only factory rear-ends I have are 3.73:1 gear ratio. Sorry I couldn't help you with a 3.38:1 rear-end for your '63, but please keep me in mind for other 4-5-6 Chevy Truck parts in the future.

Iron-Butt · 04-21-2008, 08:58 AM

How about driver and passenger side fresh air vents?

*LILRED66* · 04-22-2008, 02:24 AM

Quote:

Originally Posted by ironbutt_lcmc

How about driver and passenger side fresh air vents?

Dave:

Thanks for the parts inquiry. I have a few good, used pairs of factory kick panel vent assemblies. How about $40.00, including packaging & shipping?

Let me know your thougths on these parts or other 4-5-6 Chevy Truck parts in the future.

RWilliams · 04-22-2008, 09:09 PM

Hello Tony,

I had sent you a PM regarding a piece for my '65 truck - metal piece at the back rear cab - passenger side.

Could you check on this when you have time and get back to me?

Thanks !

*LILRED66* · 04-23-2008, 06:42 PM

Quote:

Originally Posted by RWilliams

Hello Tony,

I had sent you a PM regarding a piece for my '65 truck - metal piece at the back rear cab - passenger side.

Could you check on this when you have time and get back to me?

Thanks !

Thanks for the inquiry. The piece you are looking for is a cab extension and they were installed on stepside trucks, to close the area at the front of the step. I have a good used set of the cab extensions and would prefer to sell them as a matched pair.

I will reply to you PM regarding this item and let me know if I can help you with this item or other 4-5-6 Chevy Truck parts in the future.

sixtyfour · 04-23-2008, 12:50 AM

Please check your in box, I sent you a PM in regards to a part I'm looking for.

Thanks

*LILRED66* · 04-23-2008, 06:43 PM

Quote:

Originally Posted by sixtyfour

Please check your in box, I sent you a PM in regards to a part I'm looking for.

Thanks

I am on it...sorry for my delay in responding.

sixsisxGMC · 05-03-2008, 01:02 AM

i need a good hood for a 1966 gmc pickup lwb. do you have one or know where i could find one?

283 Man · 05-03-2008, 07:09 PM

Tony sent you a P.M. yesterday reguarding 63 c10..? please let me know something on it . thanks 283 man

(Morton).

Cohnny Jash · 05-14-2008, 09:52 PM

Tony, looking for a drivers side door for a 66 fleetside and also a battery tray, mount etc.......how much and zip is 75023.

Bob'sK10CHEVY · 05-14-2008, 10:50 PM

Hey Tony,
Just wanted to check on the V8 engine perches for my 1966 K10 have you had a chance to get a pair off?

*LILRED66* · 05-15-2008, 05:15 PM

Quote:

Originally Posted by Bob'sK10CHEVY

Hey Tony,
Just wanted to check on the V8 engine perches for my 1966 K10 have you had a chance to get a pair off?

Bob:

First and foremost, sorry for my delay in responding. I pulled one pair, only to discover, they were not factory, instead they were fabricated and installed by the previous owner and not suitable to send to you. The second pair was for a 292, which is different than the V8 perches.

I have located a third pair and I am in the process of getting them bought and shipped to me. Sorry for the delay...these are a little more elusive than I anticipated. I will keep you posted of my progress and will work hard to expedite the process.

04-09-2008, 01:28 PM	#2
truckn' Registered User Join Date: Aug 2006 Location: rogersville tennessee Posts: 276	Re: Do you need '64-'66 Chevy Truck Parts? Tony do you happen to have a big tranny hump laying around? Wanting to put 4 speed in and will have to change out.

04-09-2008, 11:24 PM	#4
botsdots Registered User Join Date: Jan 2008 Location: Katy, TX Posts: 47	Re: Do you need '64-'66 Chevy Truck Parts? Tony, I sent you a PM regarding cab mount perches. Thanks, Daniel

04-11-2008, 05:14 PM	#7
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? Dave: Glad to hear you made it home safely. I hope all the 4-5-6 Chevy Truck parts help you get your rig back on the road. Thanks for your business and let me know if I can help you other 4-5-6 Chevy Truck parts in the future. PS-Post some pictures of your rig when you get it back together. Take care.

04-15-2008, 08:17 AM	#8
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,006	Re: Do you need '64-'66 Chevy Truck Parts? Tony, would you happen to have a nice 62 chevy grill? __________________ Anthony

04-17-2008, 10:59 PM	#11
63Stepside Registered User Join Date: Apr 2008 Location: Indian Trail, North Carolina Posts: 6	Re: Do you need '64-'66 Chevy Truck Parts? looking for a rear end with 3.38 gears for my '63. can you help?

04-19-2008, 08:27 PM	#12
64Magoo Registered User Join Date: Jan 2008 Location: Bakersfield CA Posts: 265	Re: Do you need '64-'66 Chevy Truck Parts? How much for a spare tire hanger on a 64 LWB?

04-21-2008, 08:58 AM	#15
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: Do you need '64-'66 Chevy Truck Parts? How about driver and passenger side fresh air vents? __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

04-22-2008, 09:09 PM	#17
RWilliams Registered User Join Date: Sep 2005 Location: Georgia Posts: 22	Re: Do you need '64-'66 Chevy Truck Parts? Hello Tony, I had sent you a PM regarding a piece for my '65 truck - metal piece at the back rear cab - passenger side. Could you check on this when you have time and get back to me? Thanks !

04-23-2008, 12:50 AM	#19
sixtyfour Zombie Killer Join Date: Dec 2007 Location: Texas Posts: 317	Re: Do you need '64-'66 Chevy Truck Parts? Please check your in box, I sent you a PM in regards to a part I'm looking for. Thanks __________________ 1964 C10 Long Step

05-03-2008, 01:02 AM	#21
sixsisxGMC Registered User Join Date: May 2008 Location: Denham Springs Louisiana Posts: 1	Re: Do you need '64-'66 Chevy Truck Parts? i need a good hood for a 1966 gmc pickup lwb. do you have one or know where i could find one?

05-03-2008, 07:09 PM	#22
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? Tony sent you a P.M. yesterday reguarding 63 c10..? please let me know something on it . thanks 283 man(Morton).

05-14-2008, 09:52 PM	#23
Cohnny Jash Registered User Join Date: May 2008 Location: New Hope, TX Posts: 47	Re: Do you need '64-'66 Chevy Truck Parts? Tony, looking for a drivers side door for a 66 fleetside and also a battery tray, mount etc.......how much and zip is 75023.

05-14-2008, 10:50 PM	#24
Bob'sK10CHEVY Registered User Join Date: Apr 2008 Location: Greenville, SC Posts: 18	Re: Do you need '64-'66 Chevy Truck Parts? Hey Tony, Just wanted to check on the V8 engine perches for my 1966 K10 have you had a chance to get a pair off?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.