New member with a 1960 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

The1960APE · 08-16-2016, 01:36 PM

I thought this was kind of neat.... The Supercharger coolant overflow is now complete!

**DPowers** · 08-16-2016, 01:56 PM

Tucks right in there doesn't it... Nice

**Joe Pass** · 08-16-2016, 02:07 PM

I like it

The1960APE · 08-16-2016, 02:20 PM

Quote:

Originally Posted by Joe Pass

I like it

I got the front Sway bar this week.....We will see soon about fit!, Thanks again!

**66ChevyMax** · 08-16-2016, 02:33 PM

That's awesome!

The1960APE · 08-16-2016, 02:46 PM

Quote:

Originally Posted by 66ChevyMax

That's awesome!

Thank you sir!!!!

62stepside longbox · 08-16-2016, 10:08 PM

Looks like it was meant to be there

The1960APE · 08-24-2016, 03:34 PM

The wheels arrived today...Detroit steel (Mobsteel) did a great job, these things are beautiful! we've got to fit them, cut the rear end then off to powder coat!

**DPowers** · 08-24-2016, 04:32 PM

Moving it right along- they look great

**66ChevyMax** · 08-24-2016, 11:10 PM

Wheels are sweet!

The1960APE · 08-25-2016, 02:28 PM

Progress continues..... this is the fun part!

**66ChevyMax** · 08-25-2016, 02:36 PM

..... this is the fun part!

forestb · 08-25-2016, 04:16 PM

Did you have to modify any of the rear suspension to fit those wheels in? And where did you get your wheel tubs?

The1960APE · 08-26-2016, 08:50 AM

Quote:

Originally Posted by forestb

Did you have to modify any of the rear suspension to fit those wheels in? And where did you get your wheel tubs?

The Wheel tubs came from Horkeys wood and parts. We didn't have to modify anything besides the rear end, as a matter of fact it looks like I am going to be able to run up to a 345 or 355 tire!

The1960APE · 08-26-2016, 08:52 AM

I have been playing with the wheel finish, what do you guys think? This is pre clear coat!

**DPowers** · 08-26-2016, 03:02 PM

I Like. Will match your truck well.

62 Barnfind · 08-26-2016, 09:04 PM

I have been thinking about the same wheels. What size did you get?

The1960APE · 08-27-2016, 11:50 AM

After a little clear coat....

Posted via Mobile Device

The1960APE · 08-27-2016, 11:51 AM

Quote:

Originally Posted by 62 Barnfind

I have been thinking about the same wheels. What size did you get?

Those are 20x8 fronts and 20x11 rears
Posted via Mobile Device

The1960APE · 08-29-2016, 12:55 PM

I got the tires mounted and wanted to get an idea of how they look on the truck, below is a little primitive mock up!

**66ChevyMax** · 08-29-2016, 03:58 PM

I think that looks perfect, nice job

forestb · 08-29-2016, 04:14 PM

How ho you get the hub caps to stay on?

The1960APE · 08-30-2016, 06:09 AM

Quote:

Originally Posted by 66ChevyMax

I think that looks perfect, nice job

Thank you Sir!

The1960APE · 08-30-2016, 06:10 AM

Quote:

Originally Posted by forestb

How ho you get the hub caps to stay on?

The Mobsteel wheels have the three "dimples" or whatever the technical term is to hold the caps on like most steelies.
I am using a wheel vintiques center cap and it fits perfect!

The1960APE · 08-30-2016, 12:23 PM

Here's what they look like up front!

08-16-2016, 01:36 PM	#151
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 I thought this was kind of neat.... The Supercharger coolant overflow is now complete! __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

08-16-2016, 01:56 PM	#152
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: New member with a 1960 Tucks right in there doesn't it... Nice __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-16-2016, 02:07 PM	#153
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New member with a 1960 I like it __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

08-16-2016, 02:33 PM	#155
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: New member with a 1960 That's awesome! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

08-16-2016, 10:08 PM	#157
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: New member with a 1960 Looks like it was meant to be there __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

08-24-2016, 03:34 PM	#158
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 The wheels arrived today...Detroit steel (Mobsteel) did a great job, these things are beautiful! we've got to fit them, cut the rear end then off to powder coat! __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735 Last edited by The1960APE; 08-24-2016 at 03:55 PM.

08-24-2016, 04:32 PM	#159
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: New member with a 1960 Moving it right along- they look great __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-24-2016, 11:10 PM	#160
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: New member with a 1960 Wheels are sweet! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

08-25-2016, 02:28 PM	#161
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 Progress continues..... this is the fun part! __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

08-25-2016, 02:36 PM	#162
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: New member with a 1960 ..... this is the fun part! __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

08-25-2016, 04:16 PM	#163
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: New member with a 1960 Did you have to modify any of the rear suspension to fit those wheels in? And where did you get your wheel tubs?

08-26-2016, 08:52 AM	#165
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 I have been playing with the wheel finish, what do you guys think? This is pre clear coat! __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

08-26-2016, 03:02 PM	#166
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,442	Re: New member with a 1960 I Like. Will match your truck well. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

08-26-2016, 09:04 PM	#167
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,365	Re: New member with a 1960 I have been thinking about the same wheels. What size did you get? __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

08-27-2016, 11:50 AM	#168
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 After a little clear coat.... Posted via Mobile Device __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735



Register or Log In To remove these advertisements.

08-29-2016, 12:55 PM	#170
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 I got the tires mounted and wanted to get an idea of how they look on the truck, below is a little primitive mock up! __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

08-29-2016, 03:58 PM	#171
66ChevyMax Senior Member Join Date: Oct 2011 Location: Wolfforth, Texas Posts: 976	Re: New member with a 1960 I think that looks perfect, nice job __________________ Craig 1966 Chevrolet C10 - Supercharged LS3 1968 Chevrolet Camaro 1957 Chevrolet 2dr Hardtop "It makes sence if you don't think about it" Mesquite 1966 C10 - LS3 W/ Air Ride http://67-72chevytrucks.com/vboard/s...=1#post4989763

08-29-2016, 04:14 PM	#172
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: New member with a 1960 How ho you get the hub caps to stay on?

08-30-2016, 12:23 PM	#175
The1960APE Registered User Join Date: Aug 2015 Location: Asheville NC Posts: 494	Re: New member with a 1960 Here's what they look like up front! __________________ 1965 Olds 442 "Project Oldmobile" 1971 2wd GMC Jimmy..."The Orangutan" 1961 Apache "The Ape" http://67-72chevytrucks.com/vboard/s...d.php?t=679735

Register or Log In To remove these advertisements.