Project: Blank Slate - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**lolife99** · 08-06-2009, 06:59 PM

Hey Charlie,...what about the rear shocks?
My rear shocks are a different KYB part number. (344067)
ECE must be using a different shock for the rear, now.

70k52wd · 08-06-2009, 07:32 PM

I don't have boxes and didn't pay attention to part #. Now if you want me to check, I will when I pull my gas tank, again.

**Hart_Rod** · 08-12-2009, 11:44 AM

Nice write up and an even Sweeter truck! Can't wait to see/read more.

R/

my67chevytruck · 08-12-2009, 12:20 PM

Quote:

Originally Posted by SCOTI

If anyone has the shocks not yet installed, it's as easy as allowing them to fully expand & measuring; then put one end on a table & compress it until it bottoms out measuring from eye to eye. It might not be dead nuts accurate, but it will be close enough for a 35+ year old truck

.

I went out to the garage for lunch and we have the same shocks 02-7510 rear and 02-7002 front. they shipped with our ECE 2 1/2 - 4 drop. I pulled a front 02-7002 off one mount and it's about 15 1/2 expanded and 10 compressed, i also pulled the rear off one mount 02-7510 is about 19 1/4 expanded, and 12 compressed.

Hope this helps

Heath

72BlckButy · 08-12-2009, 01:27 PM

Quote:

Originally Posted by Hart_Rod

Nice write up and an even Sweeter truck! Can't wait to see/read more.

R/

Thanks Rob! Now you see why I had to pass on the other '69.

Quote:

Originally Posted by my67chevytruck

I went out to the garage for lunch and we have the same shocks 02-7510 rear and 02-7002 front. they shipped with our ECE 2 1/2 - 4 drop. I pulled a front 02-7002 off one mount and it's about 15 1/2 expanded and 10 compressed, i also pulled the rear off one mount 02-7510 is about 19 1/4 expanded, and 12 compressed.

Hope this helps

Heath

Great info Heath, props for helping out SCOTI and n2billet!

my67chevytruck · 08-12-2009, 01:36 PM

Np, Just trying to help out when i can... u make a decision on rims..... still contemplating.......

72BlckButy · 08-12-2009, 01:42 PM

Well... for the time being it's going to be rallys, but I have made a decision for future shoes.

I will have some updated pics to post from today's events. I hope to get them up this evening.

**Boomerswany** · 08-12-2009, 05:13 PM

Sweet... Subscribe-ded. I'm a sucker for the beauty of your truck, and that green color!!!

- Thanks for sharing.

My projo - is the ugly, cousin ~ but 250 / 6, looking forward to seeing your trans-mod. I'm working the rear suspension right now so your notes are a good coach!

I just got the ECE Super Track myself - Any trouble with the pass-side bracket hitting the frame? I'm using 4" rear springs and 2" aluminum blocks, then a step notch (prepping for the bags... down the road...)

72BlckButy · 08-12-2009, 08:56 PM

Boomerswany, I didn't run into any issues with the bracket hitting the frame. This might be caused because the rearend isn't centered in the rear of the truck.

Let me know if you need any shots of the rear suspension of the truck, and good luck with your project.

my67chevytruck · 08-13-2009, 09:02 AM

Quote:

Originally Posted by 72BlckButy

I will have some updated pics to post from today's events. I hope to get them up this evening.

TEASE

SCOTI · 08-13-2009, 09:45 AM

Quote:

Originally Posted by 72BlckButy

Great info Heath, props for helping out SCOTI and n2billet!

Yes, much appreciated Heath.

72BlckButy · 08-13-2009, 01:24 PM

Quote:

Originally Posted by my67chevytruck

TEASE

Well what can I say.....

I hope to have them up by this weekend, sorry Heath!

my67chevytruck · 08-14-2009, 08:58 AM

I believe Friday is the Weekend ........ it's 5 0'clock SOMEWHERE

gcburdic · 08-14-2009, 09:20 AM

Yeah...come on Nate...."It's 5 o'clock somewhere"....Man, that makes me wanna go do my J-O-B....see sig below!!!....hahaha

LooseCannon · 08-14-2009, 01:54 PM

One of the nicest trucks on the board! The drop is awesome!

sjarrett71 · 08-16-2009, 04:15 PM

STILL waiting!!!!!! The weekend is almost over!!!!!!!

72BlckButy · 08-17-2009, 02:02 PM

Well guy's.... sorry I left you hanging all weekend, but it seemed like somethign would always come up just as I was about to sign into the board. So let's play a little catch up.

Here's a quick shot of the infamous 15x7 6-lug rallys before they were taken to my body shop to be blasted clean:

Name: DSCN5133.jpg
Views: 4315
Size: 45.2 KB

Name: DSCN5133.jpg
Views: 4315
Size: 45.2 KB

Name: DSCN5134.jpg
Views: 4319
Size: 32.3 KB

Name: DSCN5135.jpg
Views: 4290
Size: 36.6 KB

Now if you notice, these pics were taken with the wheels in the back of the '69. As you can guess, these wheels have now been dropped off and picked up for painting.

72BlckButy · 08-17-2009, 02:06 PM

On Wednesday (8/12) I scheduled an appointment at my Chevy dealer (Putnam Chevrolet) to have my truck realigned after we blew apart the front end to install the drop kit. While I was there I took in some of the sites they had parked in the lot. Look for another thread to be posted soon with some of those shots.

Here's a few shots of the truck awaiting it's fate on the rack, and then being driven to and resting on the rack:

Name: DSCN5137.jpg
Views: 4302
Size: 41.5 KB

Name: DSCN5142.jpg
Views: 4298
Size: 39.5 KB

Name: DSCN5148.jpg
Views: 4296
Size: 36.9 KB

Name: DSCN5149.jpg
Views: 4301
Size: 80.8 KB

Now I know I told you to look for another thread to review the pictures of what I spent my time looking at while waiting for my truck to be realigned, but since this next shot had my truck in the background, I figured I would give you a preview of what's to come...

Name: DSCN5138.jpg
Views: 4297
Size: 48.8 KB

Yes boy's that is a Factory (reconditioned) 1969 Chevrolet Camaro Convertible SS w/ a 396..... commence drooling.....

VA72C10 · 08-17-2009, 02:12 PM

There was a camaro in that picture?

j/k

Truck looks really good.

72BlckButy · 08-17-2009, 02:12 PM

So after I paid the bill, and mopped up the front showroom floor, it was off to work. However, I just had to make a detour... so I stopped in at my body shop (Xtreme Body and Paint) and dropped off the 15x7 rallys and a set of headlight bezels. After a few hours I received a call from the shop telling the pieces were ready to be picked up, so I left work early and here's what I ended up picking up:

Name: DSCN5165.jpg
Views: 4313
Size: 40.4 KB

Name: DSCN5165.jpg
Views: 4313
Size: 40.4 KB

Name: DSCN5167.jpg
Views: 4297
Size: 35.6 KB

Name: DSCN5169.jpg
Views: 4297
Size: 39.9 KB

Name: DSCN5171.jpg
Views: 4300
Size: 40.3 KB

72BlckButy · 08-17-2009, 02:14 PM

And here's a few shots of the headlight bezels:

Name: DSCN5173.jpg
Views: 4300
Size: 41.1 KB

Name: DSCN5174.jpg
Views: 4290
Size: 43.2 KB

Name: DSCN5175.jpg
Views: 4294
Size: 34.8 KB

Name: DSCN5177.jpg
Views: 4309
Size: 32.1 KB

I will have more updates this evening...

72BlckButy · 08-17-2009, 02:15 PM

Quote:

Originally Posted by VA72C10

There was a camaro in that picture?

j/k

Truck looks really good.

Well I figured I had better point that out so it atleast wasn't over looked....

big_al_71 · 08-17-2009, 02:15 PM

Hey Nate
Have I told you that the truck looks terrific after it's new stance!!!

bigguy69 · 08-17-2009, 02:54 PM

man that truck is sweet!!

**lolife99** · 08-17-2009, 03:43 PM

Nice,...
I'm still looking for you another pair of the "super rare" 15x7's,... so you can keep those.
So anyone, that has a set of these (2 or 4),... PM me or Nate.
I might buy two if you have to purchase a complete set.

08-06-2009, 06:59 PM	#151
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: Project: Blank Slate Hey Charlie,...what about the rear shocks? My rear shocks are a different KYB part number. (344067) ECE must be using a different shock for the rear, now. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

08-06-2009, 07:32 PM	#152
70k52wd Blaze-Air Join Date: Nov 2008 Location: Virginia Posts: 1,117	Re: Project: Blank Slate I don't have boxes and didn't pay attention to part #. Now if you want me to check, I will when I pull my gas tank, again.

08-12-2009, 11:44 AM	#153
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,856	Re: Project: Blank Slate Nice write up and an even Sweeter truck! Can't wait to see/read more. R/ __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

08-12-2009, 01:36 PM	#156
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project: Blank Slate Np, Just trying to help out when i can... u make a decision on rims..... still contemplating....... __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

08-12-2009, 01:42 PM	#157
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate Well... for the time being it's going to be rallys, but I have made a decision for future shoes. I will have some updated pics to post from today's events. I hope to get them up this evening. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-12-2009, 05:13 PM	#158
Boomerswany Retiredoldfarttankerguy Join Date: Mar 2007 Location: Coeur d'Alene Idaho Posts: 148	Re: Project: Blank Slate Sweet... Subscribe-ded. I'm a sucker for the beauty of your truck, and that green color!!! - Thanks for sharing. My projo - is the ugly, cousin ~ but 250 / 6, looking forward to seeing your trans-mod. I'm working the rear suspension right now so your notes are a good coach! I just got the ECE Super Track myself - Any trouble with the pass-side bracket hitting the frame? I'm using 4" rear springs and 2" aluminum blocks, then a step notch (prepping for the bags... down the road...)

08-12-2009, 08:56 PM	#159
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate Boomerswany, I didn't run into any issues with the bracket hitting the frame. This might be caused because the rearend isn't centered in the rear of the truck. Let me know if you need any shots of the rear suspension of the truck, and good luck with your project. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-14-2009, 08:58 AM	#163
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project: Blank Slate I believe Friday is the Weekend ........ it's 5 0'clock SOMEWHERE __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

08-14-2009, 09:20 AM	#164
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: Project: Blank Slate Yeah...come on Nate...."It's 5 o'clock somewhere"....Man, that makes me wanna go do my J-O-B....see sig below!!!....hahaha __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present Last edited by gcburdic; 08-14-2009 at 09:20 AM.

08-14-2009, 01:54 PM	#165
LooseCannon Registered User Join Date: Mar 2004 Location: Boiling Springs, PA Posts: 391	Re: Project: Blank Slate One of the nicest trucks on the board! The drop is awesome! __________________ Bagged 05 Suburban Bagged Baby Blue 68

08-16-2009, 04:15 PM	#166
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Project: Blank Slate STILL waiting!!!!!! The weekend is almost over!!!!!!! __________________ -Scott-

08-17-2009, 02:02 PM	#167
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate Well guy's.... sorry I left you hanging all weekend, but it seemed like somethign would always come up just as I was about to sign into the board. So let's play a little catch up. Here's a quick shot of the infamous 15x7 6-lug rallys before they were taken to my body shop to be blasted clean: Now if you notice, these pics were taken with the wheels in the back of the '69. As you can guess, these wheels have now been dropped off and picked up for painting. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-17-2009, 02:06 PM	#168
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate On Wednesday (8/12) I scheduled an appointment at my Chevy dealer (Putnam Chevrolet) to have my truck realigned after we blew apart the front end to install the drop kit. While I was there I took in some of the sites they had parked in the lot. Look for another thread to be posted soon with some of those shots. Here's a few shots of the truck awaiting it's fate on the rack, and then being driven to and resting on the rack: Now I know I told you to look for another thread to review the pictures of what I spent my time looking at while waiting for my truck to be realigned, but since this next shot had my truck in the background, I figured I would give you a preview of what's to come... Yes boy's that is a Factory (reconditioned) 1969 Chevrolet Camaro Convertible SS w/ a 396..... commence drooling..... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) Last edited by 72BlckButy; 08-17-2009 at 02:09 PM.

08-17-2009, 02:12 PM	#169
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project: Blank Slate There was a camaro in that picture? j/k Truck looks really good. __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-17-2009, 02:12 PM	#170
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate So after I paid the bill, and mopped up the front showroom floor, it was off to work. However, I just had to make a detour... so I stopped in at my body shop (Xtreme Body and Paint) and dropped off the 15x7 rallys and a set of headlight bezels. After a few hours I received a call from the shop telling the pieces were ready to be picked up, so I left work early and here's what I ended up picking up: __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)



Register or Log In To remove these advertisements.

08-17-2009, 02:14 PM	#171
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project: Blank Slate And here's a few shots of the headlight bezels: I will have more updates this evening... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-17-2009, 02:15 PM	#173
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Project: Blank Slate Hey Nate Have I told you that the truck looks terrific after it's new stance!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-17-2009, 02:54 PM	#174
bigguy69 dazed and confused Join Date: Jul 2008 Location: marion nc Posts: 1,649	Re: Project: Blank Slate man that truck is sweet!! __________________ members met: redbaron69, billsbowtie,nc67

08-17-2009, 03:43 PM	#175
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: Project: Blank Slate Nice,... I'm still looking for you another pair of the "super rare" 15x7's,... so you can keep those. So anyone, that has a set of these (2 or 4),... PM me or Nate. I might buy two if you have to purchase a complete set. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 08-17-2009 at 04:46 PM.

Register or Log In To remove these advertisements.