OR Parting out 87 Suburban C20 454 TH400 86k - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Number98 · 04-21-2014, 08:51 AM

Does it have the fold down 2nd row bench seat? How much for the 4 latches, the 2 under the seat bottoms and the 2 at the rear side of the seat backs.

kerber63 · 04-21-2014, 09:25 PM

How much would you want for the front crossmember unbolted from the frame with whatever is attached to it?

**tll74** · 04-21-2014, 11:38 PM

Quote:

Originally Posted by MalibuSSwagon

Looking for the inner bucket seat brackets that attach to the floor if you still have them

Sorry these were already sold.

Quote:

Originally Posted by winningz

door panels?

Umm...good question. Not sure if I still have them. I'll look.

Quote:

Originally Posted by Number98

Does it have the fold down 2nd row bench seat? How much for the 4 latches, the 2 under the seat bottoms and the 2 at the rear side of the seat backs.

I'll look at them and get you a price.

Quote:

Originally Posted by kerber63

How much would you want for the front crossmember unbolted from the frame with whatever is attached to it?

Lug nut to lug nut with steering linkage complete for 300.00

I will off the grid till Thursday. Thanks, Tom

kerber63 · 04-22-2014, 12:55 AM

Thanks, I'll pass for now on the whole setup. How about front crossmember and control arms?

**tll74** · 04-25-2014, 01:25 AM

Quote:

Originally Posted by kerber63

Thanks, I'll pass for now on the whole setup. How about front crossmember and control arms?

I can do that for 150.00 Thanks, Tom

Nodnarb76 · 04-29-2014, 10:26 AM

is the air hose from the air cleaner to the front of the truck still available?

diver · 05-05-2014, 09:38 AM

hi tom ,wtb duck air selector for ac piping in dash for 72 truck i do not know if this year is same.thanks butch

Low61projekt · 07-26-2014, 10:20 PM

I know im late to the game but do yyou have the water pump pulley off this motor. It needs to be v-belt/6 rib serp. Pm also sent.

SCOTI · 07-28-2014, 12:40 PM

Would you happen to still have the rear B-pillar trim panels (plastic trim panels immediately behind the rear doors)?

**tll74** · 07-29-2014, 01:31 AM

Quote:

Originally Posted by Low61projekt

I know im late to the game but do yyou have the water pump pulley off this motor. It needs to be v-belt/6 rib serp. Pm also sent.

PM returned

Quote:

Originally Posted by SCOTI

Would you happen to still have the rear B-pillar trim panels (plastic trim panels immediately behind the rear doors)?

Yes, I'll check them for condition.

Thanks, Tom

SCOTI · 07-29-2014, 08:49 AM

Quote:

Originally Posted by tll74

PM returned

Yes, I'll check them for condition.

Thanks, Tom

Thanks.

skeet85silverado · 07-29-2014, 08:54 AM

Do u still have the grill?

**tll74** · 07-31-2014, 02:10 AM

SCOTI, I checked today and do have the trim but I'm not sure which pieces you need. Can you post a pic of what you need?

Quote:

Originally Posted by skeet85silverado

Do u still have the grill?

Sorry, I have sold it.

Thanks, Tom

VTX-Black · 08-03-2014, 07:42 PM

For the glove compartment door, I need to complete lock assembly.

ZIp 13669
Let me know if you have one and how much

Thanks

Troy 82 · 08-03-2014, 08:26 PM

Have a Driver Side outside door handle?

mrblalock66 · 08-03-2014, 10:03 PM

I would like the complete air cleaner housing and plastic boot shipped to 75462

**tll74** · 08-09-2014, 01:24 PM

Quote:

Originally Posted by VTX-Black

For the glove compartment door, I need to complete lock assembly.

ZIp 13669
Let me know if you have one and how much

Thanks

10.00 shipped

Quote:

Originally Posted by Troy 82

Have a Driver Side outside door handle?

Yes, very nice one. 27.50 shipped

Quote:

Originally Posted by mrblalock66

I would like the complete air cleaner housing and plastic boot shipped to 75462

60.00 shipped

Thanks, Tom

**michael bustamante** · 11-05-2014, 12:34 PM

Does this have the tailgate style back? Imm needing the switch assembly on the outside of the tailgate that rolls down the rear window with a key

**TBONE1964** · 11-10-2014, 02:13 AM

Hello all,

I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently.

Thank you,
Tom

zaccaglin · 12-23-2014, 01:25 AM

Any interior trim pieces left? I need some Windshield pillars that are not cracked.

**aotte1** · 12-23-2014, 10:09 PM

Pm sent

Les

**Joesjunk** · 12-23-2014, 10:33 PM

I know this is an old thread, but I'm looking for that plastics air cleaner duct that goes from the core support to the air cleaner. Also need a very nice big block fan shroud. Thanks

**tll74** · 12-27-2014, 01:27 PM

Quote:

Originally Posted by zaccaglin

Any interior trim pieces left? I need some Windshield pillars that are not cracked.

Should have, 15.00 each and 15.00 shipping.

Quote:

Originally Posted by aotte1

Pm sent

Les

PM returned

Quote:

Originally Posted by Joesjunk

I know this is an old thread, but I'm looking for that plastics air cleaner duct that goes from the core support to the air cleaner. Also need a very nice big block fan shroud. Thanks

Air cleaner duct is gone. 60.00 plus shipping on a shroud.

Thanks, Tom

**Joesjunk** · 12-27-2014, 04:42 PM

Tom, I'm interested In the shroud. Is it super nice? No cracks or broken tabs? And does it have part #14021289. What do you think on shipping to 64050? Thanks

zaccaglin · 12-27-2014, 11:29 PM

Quote:

Originally Posted by tll74

Should have, 15.00 each and 15.00 shipping.

Thanks, Tom

Could you do 40$ Shipped for the pair? Mike.

04-21-2014, 08:51 AM	#151
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: Parting out 87 Suburban C20 454 TH400 86k Does it have the fold down 2nd row bench seat? How much for the 4 latches, the 2 under the seat bottoms and the 2 at the rear side of the seat backs.

04-21-2014, 09:25 PM	#152
kerber63 Registered User Join Date: Nov 2011 Location: Salem, OR Posts: 281	Re: Parting out 87 Suburban C20 454 TH400 86k How much would you want for the front crossmember unbolted from the frame with whatever is attached to it? __________________ 1963 C10 short-wide Turbocharged 454, T56, 4.11 posi http://67-72chevytrucks.com/vboard/s...d.php?t=605408 1963 C10 suburban Unknown, unknown, 3.73 open http://67-72chevytrucks.com/vboard/s...d.php?t=622037

04-22-2014, 12:55 AM	#154
kerber63 Registered User Join Date: Nov 2011 Location: Salem, OR Posts: 281	Re: Parting out 87 Suburban C20 454 TH400 86k Thanks, I'll pass for now on the whole setup. How about front crossmember and control arms? __________________ 1963 C10 short-wide Turbocharged 454, T56, 4.11 posi http://67-72chevytrucks.com/vboard/s...d.php?t=605408 1963 C10 suburban Unknown, unknown, 3.73 open http://67-72chevytrucks.com/vboard/s...d.php?t=622037

04-29-2014, 10:26 AM	#156
Nodnarb76 Registered User Join Date: May 2013 Location: Mississippi Posts: 501	Re: Parting out 87 Suburban C20 454 TH400 86k is the air hose from the air cleaner to the front of the truck still available? __________________ 1987 R20 Suburban LQ4/4L80e swap: http://67-72chevytrucks.com/vboard/s...d.php?t=693824

05-05-2014, 09:38 AM	#157
diver Registered User Join Date: Nov 2013 Location: hiram,georgia Posts: 243	Re: Parting out 87 Suburban C20 454 TH400 86k hi tom ,wtb duck air selector for ac piping in dash for 72 truck i do not know if this year is same.thanks butch

07-26-2014, 10:20 PM	#158
Low61projekt Registered User Join Date: Apr 2012 Location: Piscataway, NJ Posts: 19	Re: Parting out 87 Suburban C20 454 TH400 86k I know im late to the game but do yyou have the water pump pulley off this motor. It needs to be v-belt/6 rib serp. Pm also sent.

07-28-2014, 12:40 PM	#159
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: Parting out 87 Suburban C20 454 TH400 86k Would you happen to still have the rear B-pillar trim panels (plastic trim panels immediately behind the rear doors)? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

07-29-2014, 08:54 AM	#162
skeet85silverado Registered User Join Date: May 2004 Location: warner robins ga Posts: 158	Re: Parting out 87 Suburban C20 454 TH400 86k Do u still have the grill?

08-03-2014, 07:42 PM	#164
VTX-Black Registered User Join Date: Mar 2013 Location: Ottawa, on Posts: 156	Re: Parting out 87 Suburban C20 454 TH400 86k For the glove compartment door, I need to complete lock assembly. ZIp 13669 Let me know if you have one and how much Thanks __________________ Wayne 1) My new 59 blue fleetside truck 2) Making a new box cover fit an old truck - The tonneau cover thread. 3) Raising the 84 back up out of the weeds

08-03-2014, 08:26 PM	#165
Troy 82 Registered User Join Date: Jan 2003 Location: Texas Posts: 75	Re: Parting out 87 Suburban C20 454 TH400 86k Have a Driver Side outside door handle? __________________ Troy 1982 Silverado

08-03-2014, 10:03 PM	#166
mrblalock66 Registered User Join Date: Jul 2011 Location: Houston, Texas Posts: 297	Re: Parting out 87 Suburban C20 454 TH400 86k I would like the complete air cleaner housing and plastic boot shipped to 75462

11-05-2014, 12:34 PM	#168
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Parting out 87 Suburban C20 454 TH400 86k Does this have the tailgate style back? Imm needing the switch assembly on the outside of the tailgate that rolls down the rear window with a key __________________ 1967custom

11-10-2014, 02:13 AM	#169
TBONE1964 Cluster King Join Date: Nov 2012 Location: Junction City, OR Posts: 5,263	Re: Parting out 87 Suburban C20 454 TH400 86k Hello all, I was asked by Tom (tll74) to let everyone know that he will be available to respond to request after the 18th. He is away on a hunting trip currently. Thank you, Tom __________________ Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com I am also a dealer for Counterpart for gauge cluster parts only. Also see my facebook page, CG&C

12-23-2014, 01:25 AM	#170
zaccaglin Registered User Join Date: Apr 2012 Location: Auburndale, FL Posts: 716	Re: Parting out 87 Suburban C20 454 TH400 86k Any interior trim pieces left? I need some Windshield pillars that are not cracked. __________________ Zaccaglin 1998 Chevrolet C1500 Ext. Cab 350 Former Rig: 1985 Chevrolet K20 Suburban 6.2L Detroit/TH400/NP208

12-23-2014, 10:09 PM	#171
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,649	Re: Parting out 87 Suburban C20 454 TH400 86k Pm sent Les



Register or Log In To remove these advertisements.

12-23-2014, 10:33 PM	#172
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,702	Re: Parting out 87 Suburban C20 454 TH400 86k I know this is an old thread, but I'm looking for that plastics air cleaner duct that goes from the core support to the air cleaner. Also need a very nice big block fan shroud. Thanks __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

12-27-2014, 04:42 PM	#174
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,702	Re: Parting out 87 Suburban C20 454 TH400 86k Tom, I'm interested In the shroud. Is it super nice? No cracks or broken tabs? And does it have part #14021289. What do you think on shipping to 64050? Thanks __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale Last edited by Joesjunk; 12-27-2014 at 11:33 PM.

Register or Log In To remove these advertisements.