NY Parting a '72 Blazer 4x4 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Cheyennekid · 02-21-2012, 01:08 AM

Do you happen to have a interior tire carrier with hardware?
Posted via Mobile Device

ORANGBLAZ · 02-21-2012, 10:31 PM

Quote:

Originally Posted by Cheyennekid

Do you happen to have a interior tire carrier with hardware?
Posted via Mobile Device

Sorry, that I do not have.

Cheyennekid · 02-21-2012, 11:01 PM

Ok sounds good thanks by the way!
Posted via Mobile Device

Skram · 02-23-2012, 02:45 AM

Do you have

-Inner door panels, I need both sides?
-K5 Blazer emblems? And 8/350 emblems?
-Seat backs for both front seats?
-Any heater air flow selector? Specifically the part that devides from defrost to dash vents?
Posted via Mobile Device

ORANGBLAZ · 02-24-2012, 08:08 AM

Quote:

Originally Posted by Skram

Do you have

-Inner door panels, I need both sides?
-K5 Blazer emblems? And 8/350 emblems?
-Seat backs for both front seats?
-Any heater air flow selector? Specifically the part that devides from defrost to dash vents?
Posted via Mobile Device

Sorry, got nothing on your list. But will be checking out two Blazers this w/e, so will keep you in mind-Chuck

72Blazing · 02-26-2012, 04:16 PM

Would you happen to have any good rear floor sections?
Preferably around the wheel house area on both sides.
Thanks

ORANGBLAZ · 02-26-2012, 10:12 PM

Quote:

Originally Posted by 72Blazing

Would you happen to have any good rear floor sections?
Preferably around the wheel house area on both sides.
Thanks

The floor in this Blazer was long gone. But I'll let u know if I find some good patch panels in the near future.

72Blazing · 02-27-2012, 01:27 AM

Ok Thanks. Where did you find the K5 emblems in your avatar? Those are sweet!

72Blazing · 02-28-2012, 08:00 PM

If you still have the blazer tailgate seal strip I will take it.
Could you do $50 shipped to 78501?
Thanks

ORANGBLAZ · 02-29-2012, 03:34 PM

Quote:

Originally Posted by 72Blazing

If you still have the blazer tailgate seal strip I will take it.
Could you do $50 shipped to 78501?
Thanks

I can do $60 shipped.

72Blazing · 02-29-2012, 09:22 PM

Quote:

Originally Posted by ORANGBLAZ

I can do $60 shipped.

I will take it. PM me paypal info.
Thanks

glassgod1 · 02-29-2012, 11:10 PM

Do you still have the front seat brackets? If so how much shipped to 56258?Could really use them. Thanks

RideSF · 05-23-2012, 11:37 PM

You have pictures of the bucket seat brackets? How much shipped to 94044? Thanks nick
Posted via Mobile Device

ORANGBLAZ · 02-29-2012, 03:55 PM

Quote:

Originally Posted by 72Blazing

Ok Thanks. Where did you find the K5 emblems in your avatar? Those are sweet!

It just looks good in the picture!

Bigb401 · 02-29-2012, 12:05 AM

Do the doors have the latch reinforcement plates and the small brass catches above the latch? (there are two per each door, one on the door itself and one one the pillar) My doors have been replaced by PO and don't have them as it should.
Posted via Mobile Device

Bigb401 · 02-29-2012, 12:13 AM

Do the doors have the latch reinforcement plates and the small brass catches above the latch? (there are two per each door, one on the door itself and one one the pillar) My doors have been replaced by PO and don't have them as it should. Want to buy badly.
Posted via Mobile Device

ORANGBLAZ · 02-29-2012, 03:35 PM

Quote:

Originally Posted by Bigb401

Do the doors have the latch reinforcement plates and the small brass catches above the latch? (there are two per each door, one on the door itself and one one the pillar) My doors have been replaced by PO and don't have them as it should. Want to buy badly.
Posted via Mobile Device

Didn't have time to take them off. Will be looking at more Blazers in the near future, and will keep you in mind.

Bigb401 · 02-29-2012, 07:44 PM

Ok thanks. That would be great if u let me know if u end up finding some.
Posted via Mobile Device

72Blazing · 03-12-2012, 05:06 PM

Tailgate seal strip arrived today. Great shape and awesome packaging!
Thanks

ORANGBLAZ · 03-17-2012, 02:33 PM

Quote:

Originally Posted by 72Blazing

Tailgate seal strip arrived today. Great shape and awesome packaging!
Thanks

Glad you got it!
PVC is the way to go for stuff that you don't want getting bent in shipping.

bigeasycigars · 03-15-2012, 06:48 PM

Are the Bucket seat brackets @ $100 plus shipping. still available?

Please advise.

Regards,

Eric
91604 is my ZIP.

Bigb401 · 03-24-2012, 11:50 PM

Looking for a set of black seatbelts
Posted via Mobile Device

RideSF · 04-08-2012, 01:09 PM

Got the bucket seat tracks for both sides?
Posted via Mobile Device

shearjs · 04-30-2012, 05:23 PM

Would you happen to have a sway bar for sale? Shipped to 37172. Thanks.

KShepJr · 05-09-2012, 10:29 PM

Saw in a prior post you had six hatches? I am in bad need of one. I have good top hinges and rubber/glass - just need a hatch pretty bad........

02-21-2012, 01:08 AM	#1
Cheyennekid Registered User Join Date: Dec 2011 Location: Sg california Posts: 89	Re: Parting a '72 Blazer 4x4 Do you happen to have a interior tire carrier with hardware? Posted via Mobile Device

02-21-2012, 11:01 PM	#3
Cheyennekid Registered User Join Date: Dec 2011 Location: Sg california Posts: 89	Re: Parting a '72 Blazer 4x4 Ok sounds good thanks by the way! Posted via Mobile Device

02-23-2012, 02:45 AM	#4
Skram Registered User Join Date: Sep 2011 Location: Minnesota Posts: 8	Re: Parting a '72 Blazer 4x4 Do you have -Inner door panels, I need both sides? -K5 Blazer emblems? And 8/350 emblems? -Seat backs for both front seats? -Any heater air flow selector? Specifically the part that devides from defrost to dash vents? Posted via Mobile Device

02-26-2012, 04:16 PM	#6
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 397	Re: Parting a '72 Blazer 4x4 Would you happen to have any good rear floor sections? Preferably around the wheel house area on both sides. Thanks

02-27-2012, 01:27 AM	#8
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 397	Re: Parting a '72 Blazer 4x4 Ok Thanks. Where did you find the K5 emblems in your avatar? Those are sweet!

02-28-2012, 08:00 PM	#9
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 397	Re: Parting a '72 Blazer 4x4 If you still have the blazer tailgate seal strip I will take it. Could you do $50 shipped to 78501? Thanks

02-29-2012, 11:10 PM	#12
glassgod1 Registered User Join Date: Sep 2007 Location: marshall Posts: 24	Re: Parting a '72 Blazer 4x4 Do you still have the front seat brackets? If so how much shipped to 56258?Could really use them. Thanks

05-23-2012, 11:37 PM	#13
RideSF Registered User Join Date: Apr 2012 Location: San Francisco ca Posts: 224	Re: Parting a '72 Blazer 4x4 You have pictures of the bucket seat brackets? How much shipped to 94044? Thanks nick Posted via Mobile Device

02-29-2012, 12:05 AM	#15
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Parting a '72 Blazer 4x4 Do the doors have the latch reinforcement plates and the small brass catches above the latch? (there are two per each door, one on the door itself and one one the pillar) My doors have been replaced by PO and don't have them as it should. Posted via Mobile Device __________________ Proud to be IBEW Local 2150

02-29-2012, 12:13 AM	#16
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Parting a '72 Blazer 4x4 Do the doors have the latch reinforcement plates and the small brass catches above the latch? (there are two per each door, one on the door itself and one one the pillar) My doors have been replaced by PO and don't have them as it should. Want to buy badly. Posted via Mobile Device __________________ Proud to be IBEW Local 2150

02-29-2012, 07:44 PM	#18
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Parting a '72 Blazer 4x4 Ok thanks. That would be great if u let me know if u end up finding some. Posted via Mobile Device __________________ Proud to be IBEW Local 2150

03-12-2012, 05:06 PM	#19
72Blazing Registered User Join Date: Jan 2012 Location: McAllen, Texas Posts: 397	Re: Parting a '72 Blazer 4x4 Tailgate seal strip arrived today. Great shape and awesome packaging! Thanks

03-15-2012, 06:48 PM	#21
bigeasycigars Registered User Join Date: Mar 2010 Location: Los Angeles, California Posts: 226	Re: Parting a '72 Blazer 4x4 Are the Bucket seat brackets @ $100 plus shipping. still available? Please advise. Regards, Eric 91604 is my ZIP. __________________ '71 K/5 CST Work in progress...In Sicily, women are more dangerous than shotguns.

03-24-2012, 11:50 PM	#22
Bigb401 Registered User Join Date: Jan 2012 Location: Burlington, wi. Posts: 254	Re: Parting a '72 Blazer 4x4 Looking for a set of black seatbelts Posted via Mobile Device __________________ Proud to be IBEW Local 2150

04-08-2012, 01:09 PM	#23
RideSF Registered User Join Date: Apr 2012 Location: San Francisco ca Posts: 224	Re: Parting a '72 Blazer 4x4 Got the bucket seat tracks for both sides? Posted via Mobile Device



Register or Log In To remove these advertisements.

04-30-2012, 05:23 PM	#24
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: Parting a '72 Blazer 4x4 Would you happen to have a sway bar for sale? Shipped to 37172. Thanks. __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

05-09-2012, 10:29 PM	#25
KShepJr Registered User Join Date: Apr 2012 Location: Greenwich, NJ Posts: 6	Re: Parting a '72 Blazer 4x4 Saw in a prior post you had six hatches? I am in bad need of one. I have good top hinges and rubber/glass - just need a hatch pretty bad........

Register or Log In To remove these advertisements.