LIL ERV the 50 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**joedoh** · 07-06-2016, 09:30 PM

I saw your question on the door window install and came across these pictures from MotherTrucker on the Hamb, hope they help.

crossfire84 · 07-07-2016, 05:33 AM

wow! thank you.

crossfire84 · 07-12-2016, 06:36 PM

Installed the new gages today.

99 to Life · 07-12-2016, 06:42 PM

nice, those are about the only aftermarket gauges I can stand. They look good.

crossfire84 · 07-12-2016, 07:41 PM

thank you! they are a nice fit.

crossfire84 · 07-22-2016, 05:46 PM

A little more done, Assembling front clip and running wires. Should have all parts back from paint tomorrow, And yes its hot here 92 in garage with fans.

99 to Life · 07-22-2016, 11:41 PM

coming together. So hot here too, Im dreading working tomorrow in the humidity. I have to go buy a fan cause I don't have a work fan. keep it up, you'll be cruising soon.

crossfire84 · 07-27-2016, 06:53 PM

So today I set the new glass in the frames with setting tape. I did a small how to on this, hope this helps someone.

The new tape has a cloth face and a rubber back with a peel off liner, there is no adhesion on the tape. Place rubber side on glass and use electrical tape to hold it on.

Cut small notches at corners as you go around the window.
Slide window in frame, It may be snug so tap easy, I put mine on a bath towel.

Leave the tape on it's so thin its fine.

Assemble then take a razor blade and trim around the frame and your done.

99 to Life · 07-27-2016, 07:35 PM

nice job

**Advanced Design** · 07-27-2016, 08:45 PM

Good tutorial, looks very nice!

crossfire84 · 07-28-2016, 05:31 AM

thanks

crossfire84 · 08-12-2016, 07:20 PM

So today I put the wind lace in, not a fun job so after trying dish soap,Vaseline,WD40 I found the perfect stuff to use. The goop that electricians use to pull wire. Menards has it and it worked perfect.
Be liberal in its use you cannot use too much.
Goop the back of rubber then do the tracks and outside of tracks.

**joedoh** · 08-12-2016, 11:20 PM

looks great!

Quote:

Originally Posted by crossfire84

Be liberal in its use you cannot use too much.

I wish more things applied to this advice!

solidaxel · 08-13-2016, 02:21 PM

I have used that to pull cable, good idea!
Be sure to wipe up the excess before it dries, seems like it desolves with water

crossfire84 · 08-13-2016, 06:49 PM

Quote:

Originally Posted by solidaxel

I have used that to pull cable, good idea!
Be sure to wipe up the excess before it dries, seems like it desolves with water

Works great and cleans up with a damp rag.

99 to Life · 08-13-2016, 07:16 PM

good job, I just screwed mine in. Wasn't wanting to go in, maybe I'll have more patience next time and try this!

crossfire84 · 08-14-2016, 08:43 AM

..

crossfire84 · 10-27-2016, 05:51 PM

So today I finished running the fuel and return lines.
I put a large canister filter in back and a 40 micron in front of carb.
I ran aluminum lines down the frame rail.

crossfire84 · 02-22-2017, 07:26 PM

Rear brake lines in and radiator in, Getting close now!

99 to Life · 02-22-2017, 11:36 PM

nice, just in time for spring!

crossfire84 · 06-17-2017, 04:58 PM

Its been a while but more work this week.
Shifter and boot+ring in.
Under dash A/C in, still have to plumb it.
Parking brake handle, lines in.
Engine hoses, fuel, vacuum in.
Carpet in.

**joedoh** · 06-19-2017, 10:48 PM

looks good! I bet you are chomping at the bit to run with it.

99 to Life · 06-20-2017, 06:27 PM

ah the final stretch, can seem never ending too!

crossfire84 · 06-22-2017, 12:49 PM

getting close!

crossfire84 · 09-16-2017, 04:50 PM

Getting closer, however the hyd clutch does not engage far enough to shift. Going to have to look for a longer throw. But it sounds sweet!

07-06-2016, 09:30 PM	#151
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: LIL ERV the 50 I saw your question on the door window install and came across these pictures from MotherTrucker on the Hamb, hope they help. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

07-07-2016, 05:33 AM	#152
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 wow! thank you. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

07-12-2016, 06:36 PM	#153
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 Installed the new gages today. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

07-12-2016, 06:42 PM	#154
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: LIL ERV the 50 nice, those are about the only aftermarket gauges I can stand. They look good. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

07-12-2016, 07:41 PM	#155
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 thank you! they are a nice fit. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

07-22-2016, 05:46 PM	#156
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 A little more done, Assembling front clip and running wires. Should have all parts back from paint tomorrow, And yes its hot here 92 in garage with fans. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

07-22-2016, 11:41 PM	#157
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: LIL ERV the 50 coming together. So hot here too, Im dreading working tomorrow in the humidity. I have to go buy a fan cause I don't have a work fan. keep it up, you'll be cruising soon. __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

07-27-2016, 06:53 PM	#158
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 So today I set the new glass in the frames with setting tape. I did a small how to on this, hope this helps someone. The new tape has a cloth face and a rubber back with a peel off liner, there is no adhesion on the tape. Place rubber side on glass and use electrical tape to hold it on. Cut small notches at corners as you go around the window. Slide window in frame, It may be snug so tap easy, I put mine on a bath towel. Leave the tape on it's so thin its fine. Assemble then take a razor blade and trim around the frame and your done. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

07-27-2016, 07:35 PM	#159
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: LIL ERV the 50 nice job __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

07-27-2016, 08:45 PM	#160
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: LIL ERV the 50 Good tutorial, looks very nice! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

07-28-2016, 05:31 AM	#161
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 thanks __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

08-12-2016, 07:20 PM	#162
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 So today I put the wind lace in, not a fun job so after trying dish soap,Vaseline,WD40 I found the perfect stuff to use. The goop that electricians use to pull wire. Menards has it and it worked perfect. Be liberal in its use you cannot use too much. Goop the back of rubber then do the tracks and outside of tracks. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

08-13-2016, 02:21 PM	#164
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: LIL ERV the 50 I have used that to pull cable, good idea! Be sure to wipe up the excess before it dries, seems like it desolves with water __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

08-13-2016, 07:16 PM	#166
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: LIL ERV the 50 good job, I just screwed mine in. Wasn't wanting to go in, maybe I'll have more patience next time and try this! __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

08-14-2016, 08:43 AM	#167
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 .. __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!



Register or Log In To remove these advertisements.

10-27-2016, 05:51 PM	#168
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 So today I finished running the fuel and return lines. I put a large canister filter in back and a 40 micron in front of carb. I ran aluminum lines down the frame rail. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

02-22-2017, 07:26 PM	#169
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 Rear brake lines in and radiator in, Getting close now! Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

02-22-2017, 11:36 PM	#170
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: LIL ERV the 50 nice, just in time for spring! __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

06-17-2017, 04:58 PM	#171
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 Its been a while but more work this week. Shifter and boot+ring in. Under dash A/C in, still have to plumb it. Parking brake handle, lines in. Engine hoses, fuel, vacuum in. Carpet in. Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

06-19-2017, 10:48 PM	#172
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: LIL ERV the 50 looks good! I bet you are chomping at the bit to run with it. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

06-20-2017, 06:27 PM	#173
99 to Life Registered User Join Date: Jan 2010 Location: Titusville, PA Posts: 3,585	Re: LIL ERV the 50 ah the final stretch, can seem never ending too! __________________ 51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc http://67-72chevytrucks.com/vboard/s...d.php?t=382481 49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold http://67-72chevytrucks.com/vboard/s...d.php?t=594874 VIDEOS https://youtu.be/E8zHhjgS_lA https://youtu.be/E8zHhjgS_lA Geronimo 54' LS engine, static drop IFS, Client build, just about done http://67-72chevytrucks.com/vboard/s...62#post7399162 52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next! www.coffeeandcustoms.com

06-22-2017, 12:49 PM	#174
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 getting close! __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

09-16-2017, 04:50 PM	#175
crossfire84 Registered User Join Date: Jun 2012 Location: wind lake WI Posts: 1,749	Re: LIL ERV the 50 Getting closer, however the hyd clutch does not engage far enough to shift. Going to have to look for a longer throw. But it sounds sweet! Attached Images __________________ LIL ERV the 50-3600 396 BBC stroked to 415 cid Richmond 6spd over drive C4 rear Porter built a arms Never give the Devil a ride,because he'll want to Drive!

Register or Log In To remove these advertisements.